The P-70B is a newer version of the P-70 Nighthawk that carries the SCR-720 centimetric radar, which has only an internal antenna enclosed in the nose. The skin is by Sopwith Chameleon: http://sopwithc.wetpaint.com The P-70B is a straight forward development of the original P-70 armed with two forward firing .50s and four forward firing 20mm in a ventral pack installed in the bombay, She carried a crew of two, pilot and radar operator. The cannon are on the GUN TRIGGER and the guns are on the CANNON TRIGGER for convenience sake, Please checkout the CHECKLIST and NOTES for valuable flight and navigation information. Be aware that the panel is fully equipped with AP and ADF. To install simply place the TR_P-70B folder in the AIRCRAFT folder of your CFS2 Main Directory. This is freeware but must not be uploaded at any other site, or modified without permission. Enjoy!

The P-70 Nighthawk is the nightfighter version of the A-20 Havoc/Havoc II. The aircraft served in the Pacific and Europe as an early stopgap nightfighter until the more effective P-61s and Mossies came into service. The aircraft is dressed in the skin of the 6th Night Fighter Squadron, Port Moresby '43, with an alternate Brit skin (23 Sqdrn RAF Ford '43) included for European use. Both are by Sopwith Chameleon: http://sopwithc.wetpaint.com The P-70 is a straight forward development of the TR_A-20 armed with two forward firing .50s and four forward firing 20mm in a ventral pack installed in the bombay, She carried a crew of two, pilot and radar operator. The cannon are on the GUN TRIGGER and the guns are on the CANNON TRIGGER for convenience sake, Please checkout the CHECKLIST and NOTES for valuable flight and navigation information. Be aware that the panel is fully equipped with AP and ADF. To install simply place the TR_P-70_Nighthawk folder in the AIRCRAFT folder of your CFS2 Main Directory. This is freeware but must not be uploaded at any other site, or modified without permission. Enjoy!

TR_A-1J_Skyraider for CFS2 (Air Commando - Night) circa 1969 Southeast Asia Textures are by Sopwith Chameleon, James Peach. The skin represents an aircraft of the 602nd Special Operations Wing (Air Commando) during the VN conflict. The only other skins compatible with this aircraft are those done for the TR_A-1H by Sopwith. The model is multi-LOD. She carries a complex panel by Mike Eustace...be sure to read the Panel Instructions, and has a rudimentary DVC. Her weapons are by AlphaSim and Martin Wright. Torpedo, Droptanks and Ferry Tank are by myself.

I made this aircraft model in 2006. Nobody was interested in it then, not sure anyone will be now. I took the old model, put in the VC from my Caproni F.5 and altered the Airfile from the Caproni to match the specs of the Fiat. I tricked out some animations and altered some textures from Morton to fit this model. Credits: Model by William Dickens Airfile by Pedro Paulo Rezende, altered by W. Dickens Panel by Pedro Paulo Rezende Italian Paint Schemes by Morton Finnish Scheme by W. Dickens Prop Textures by Kelticheart Engine from Dave Eckert Source

The enclosed files contain new CFG files for all three of TR's Skyraiders, and the fx_vclight.fx effect. When installed these files will properly place the illumination for the DVC in the aircraft. To install simply replace the CFG files in each Skyraider with the new one for that aircraft from the download, and place the fx_vclight.fx file in the EFFECTS folder of the CFS2 Main Directory.

The Caproni-Vizzola F.5 was an Italian fighter aircraft built by Caproni. It was a single-seat low-wing cantilever monoplane with retractable landing gear. 14 pre-production F.5s were ordered. No production models were built but the completed F.5s were used operationally as night and day fighters in defense of Rome. Credits: Model by William Dickens Airfile by Pedro Paulo Rezende Damage Profile and Panel by Pedro Paulo Rezende Paint Scheme by L.M. Brown Prop Textures by Kelticheart Engine from Dave Eckert Source

The Bloch MB-151 was the first production version of the MB-150 single seat fighter aircraft ordered by the French air force in 1938. Production was halted in favor of the more powerful MB-152 version after 140 MB-151s had been delivered to the French Air Force. 25 MB-151s were also ordered by the Greek Airforce. Of these, only 9 had been delivered before hostilities commenced. The model here is painted in Greek Air Force colors. Credits: Model by William Dickens Airfile by Pedro Paulo Rezende and AirWrench applied by W. Dickens Damage Profile by Pedro Paulo Rezende Paint Scheme by L.M. Brown Prop Textures by Kelticheart Engine from Dave Eckert Source

This is the correct upload file for the aircraft I sent yesterday. That file only contained one aircraft with the wrong skin. That skin was done by Morton and was originally for an aircraft by K. Ito. Sorry about any inconvenience. W. Dickens

These are the gauges for Mike Eustace's panel used in all of the TR Skyraiders, AD-2, AD-6 and A-1H. The GPS gauge included is for Korea. A modified gauge that includes Korea and Viet Nam airfields is available here at SimV.

The Bloch 152 C1 was one of the standard Armee de l'Air fighters during the Battle of France in May-June 1940. This CFS2 Model was built expressly for CFS2 with breaking parts and Multi-LODs for Frame rate purposes. Originally built as an AI aircraft, a pretty fair VC and animations like cowl flaps, shock absorber effect and retracting canopy were later added to make a player flyable version. Both version are included in the download. The model itself was actually started in 2007 and has sat around since then . . . Credits: Model by William Dickens Airfile by Pedro Paulo Rezende and AirWrench applied by W. Dickens Damage Profile by Pedro Paulo Rezende Paint Scheme by L.M. Brown Prop Textures by Kelticheart Engine from Dave Eckert Source