FS2004
Mid-Atlantic Air Museum Simuations Douglas XC-47C Amphibian
addon for the R4D/DC-3 Package
This free add-on aircraft is for purchasers of the MAAM-SIM
R4D/DC-3 for FS2004, only. You must have the R4D/DC-3 installed
in your FS2004 BEFORE you attempt to install this add-on. The
XC-47C self-installer will not run unless the full R4D/DC-3
package is present. You may purchase the CD from the Mid-Atlantic
Air Museum On-line Store at www.maam.org.
All proceeds from CD sales go to support the museum and its
restoration programs. Bill Rambow, Jan Visser, Fred Banting,
Rob Young, Howard Sodja, and Mark Beaumont MAAM-SIM. 5MB
FS2004
MAAM-SIM DC-3 Amphibian Folsom's Air Service
This texture set in Folsom's Air Service livery requires both
a previous installation of the MAAM-SIM R4D-6/DC3A package available
from Mid-Atlantic Air Simulations (MAAM-SIM) at www.maam.org
and the free, add-on XC-47C aircraft that complements that package
(maamxc47.zip). This aircraft was originally construction number
(c/n) 11761 and was delivered to the USAAF as 41-68834 in July
of 1943. A DC-3A/C-53D-DO, she flew for Eastern Airlines as
NC86562 until 1952. She was converted to a float plane by Dick
Folsom of Greenville, Maine, USA in 1976. Until her floats were
removed recently, she was the only remaining example of a DC-3
on floats in the world. File name: MAAMAFAS.ZIP By: Mark Beaumont
for MAAM-SIM. 6.8MB
FS2004
MAAM-SIM DC-3 Amphibian DC-3 Airways classic and 1940's liveries
This freeware download includes official repaints, in two variations,
for the virtual airline 'DC-3 Airways', intended primarily for
use by 'DC-3 Airways' pilots. If you are not already a member,
check out 'DC-3 Airways' at www.dc3airways.com. Both texture
sets require both a previous installation of the MAAM-SIM R4D-6/DC3A
package available from Mid-Atlantic Air Simulations (MAAM-SIM)
at www.maam.org
and the free, add-on XC-47C aircraft that complements that package
(maamxc47.zip), which is available from all major flight simulation
sites. By Mark Beaumont.. 13.8MB
FS2004
MAAM-SIM DC-3 Amphibian Water Rudder Gauge for 'IFR' panel
This gauge is useful only to those who have three other downloads:
a previous installation of the MAAM-SIM R4D-6/DC3A package available
from Mid-Atlantic Air Simulations (MAAM-SIM) at www.maam.org;
the free, add-on XC-47C aircraft that complements that package
(maamxc47.zip); and Mark Beaumont's 'IFR' panel for the MAAM-SIM
aircraft (DCAMAAM4.ZIP). This adds a functional water rudders
lever to the main, IFR view and VC modes, negating the necessity
to use key strokes and indicating status of the rudders. This
is an unofficial addition and is not configured to fit the default
MAAM-SIM DC-3 panel as aliased by the XC-47C. Installation instructions
are included. By Mark Beaumont, Dave Bitzer. 343K
FS2004/FS2002
Douglas DC-3 'DC-3 Airways' classic and 1940's MAAM-SIM alternative
bitmaps Key
replacement textures for the Passenger and Cargo versions of
'DC-3 Airways' liveries found in DCAMAAMP.ZIP and DCAMAAMF.ZIP
respectively. Also requires the base model of the GMAX MAAM-SIM
DC-3A available from www.maam.org. Saved in DXT3 format without
mipmaps, these textures are designed to replace the original
32-bit images for users seeking to maximise texture refresh
rate or who operate slower computers. Image quality, although
reduced, remains excellent on most systems. By Mark Beaumont.
4.5MB
FS2004/FS2002
Douglas DC-3 'DC-3 Airways' classic and 1940's MAAM-SIM liveries
- Passenger Texture sets only,
requiring the base model of the GMAX MAAM-SIM DC-3A available
from www.maam.org.
Will not work with the default FS2004 DC-3, or with any previous
versions of the MAAM-SIM product. Fictional but official repaints
for the virtual airline 'DC-3 Airways' and intended primarily
for use by 'DC-3 Airways' pilots. Visit www.dc3airways.com to
learn more. Download contains liveries in 'bare metal' and 'classic'
versions, the latter with two options. Aircraft repaints by
Mark Beaumont. File name: DCAMAAMP.ZIP
FS2004
MAAM-SIM DC-3 Fuel Tank Selection and Autolean Modification
This gauge is applicable only to the FS2004 MAAM-SIM DC-3 (available
from Mid Atlantic Air Museum Simulations at www.maam.org)
or other planes using the MAAM-SIM DC-3 AIRCRAFT.CFG and MaamSim_DC3.air
flight dynamics files, such as the Mark Beaumont 'IFR' Panel
modification for the MAAM-SIM DC-3 (DCAMAAM4.zip, DCAMAAM5.zip).
It is not calibrated for use with the stock DC-3, or the MAAM-SIM
R4D flight dynamics files, or other third party aircraft. Likewise,
it is not recommended for use with the MAAM-SIM DC-3 in FS2002.
The purpose of this gauge is to disable FS2004's default characteristic
of setting the fuel flow to the engines from "all" tanks setting,
and to simulate the correct auto-rich and auto-lean settings
on the mixture controls as desired. By Dave Bitzer and Mark
Beaumont. 102K
FS2004/FS2002
MAAM-SIM DC-3 World Rally 2004 Textures only.
This is a repaint of the FS2004/FS2002 MAAM-SIM Passenger DC-3
in a specially commissioned livery for the 2004 DC-3 World Rally,
organised by the team at DC-3 Airways VA. Visit www.dc3airways.com
for information about this exciting event, which runs from 15
October through 30 October 2004. Thereafter, you can keep this
lovely lady as a souvenir of how well you flew! Requires a base
install of the FS2004/2002 R4D-6/DC-3A package available from
Mid-Atlantic Air Museum Simulations at
www.maam.org. This livery is also available for the default
FS2004 DC-3 as wr4_fs9.zip. By Mark Beaumont, VP Fleet, DC-3
Airways. 972K
FS2004/FS2002
MAAM-SIM DC-3 South African Airways 'Klapperkop' Textures only.
Requires the base R4D-6 package available from Mid Atlantic
Air Museum Simulations (MAAM-SIM) at www.maam.org
). Based on original textures by Jan Visser, this texture set
in South African Airways livery requires the base R4D-6 package
available from Mid Atlantic Air Museum Simulations (MAAM-SIM)
at www.maam.org. Installation instructions are included. "Klapperkop"
was manufactured in 1943 as a C-47. She became part of the 'South
African Airways Historic Flight' in 1991, and has undertaken
numerous all-inclusive package tours to various destinations,
including game lodges in South Africa, Namibia and Zimbabwe,
as well as trips to the Victoria Falls. The aircraft seats a
total of 24 passengers in a business class configuration, and
up to four crew members. By Mark Beaumont. File name: MAAMSAAK.ZIP.
6.4MB
FS2004/FS2002
MAAM-SIM DC-3 Atlantic Air Cargo N437GB and N705GB Textures
of the Payware MAAM DC-3. Based on original textures by
Jan Visser, these two texture sets in Atlantic Air Cargo liveries
require the base R4D-6 package available from Mid Atlantic Air
Museum Simulations (MAAM-SIM) at www.maam.org.
Installation instructions are included, together with typical
flight plans for these aircraft. Atlantic Air Cargo's DC-3s
operate out of Opa Locka Airport (KOPF) in Miami, Florida, routinely
flying freight from KOPF and Miami International (KMIA) to destinations
throughout the Bahamas and Caribbean. By Mark Beaumont. File
name: MAAMAAC.ZIP 16.1MB
