Jul 15, 2018 |
FSX > Scenery > Page 5
 
... 3 4 5 6 7 8 ...
 
Small Columbian Airfields
Small Columbian Airfields
0.66Mb (131 downloads)
Small airfields in Columbia for aerial fumigation and local VFR flights. It is necessary to have installed the FREEMESH of north central and south America.
Posted Mar 16, 2018 12:52 by MARIO FLOREZ TRUJILLO
 
FSX/P3D Advanced Landing Ground A-7 Azeville / Fontenay France, June, 1944
FSX/P3D Advanced Landing Ground A-7 Azeville / Fontenay France, June, 1944
75.64Mb (200 downloads)
This freeware scenery package attempts to represent Advanced Landing Ground A-7 of the US 9th AAF. ALG A-7 was one of 29 Advanced Landing Grounds that dotted the Cotentin Peninsula. Advanced Landing Ground "A-7", consisted of a single 3600' x 120' Square-Mesh Track/Compressed Earth runway aligned 08/26. In addition, tents were used for billeting and also for support facilities; an access road was built to the existing road infrastructure; a dump for supplies, ammunition, and gasoline drums, along with a drinkable water and minimal electrical grid for communications and station lighting. Construction was started on June 6th, 1944. The engineers operated under enemy fire to construct this crucial airfield. The initial operational date was July 2nd, 1944. The airfield was vacated by September 15th, 1944 and was returned to the local population. The airfield was built by 819th Engineer Aviation Battalion. Units from the 365th Fighter Group and 363rd Fighter Group / Tactical Reconnaissance Group flew sorties from this airfield. No evidence is left of this airfield except the monument maintained by the grateful local French population. This scenery contains extensive audio and effects content. It has been tested and found to function properly in FSXA, P3D V3 and P3D4. It looks best with ORBX Global, Vector and EU land class, but will function with no scenery enhancements. By Terry Flemming
Posted Mar 11, 2018 11:17 by uploader
 
FSX/P3D Advanced Landing Ground A-11, Saint Lambert Normandy, France, June, 1944
FSX/P3D Advanced Landing Ground A-11, Saint Lambert Normandy, France, June, 1944
75.78Mb (283 downloads)
This freeware scenery package attempts to represent Advanced Landing Ground A-11 of the US 9th AAF. ALG A-11 was one of 29 Advanced Landing Grounds that dotted the Cotentin Peninsula. Known as Advanced Landing Ground "A-11", the airfield consisted of a single 5000' (1500 m) Square-Mesh Track/Compressed Earth runway aligned 05/23. In addition, tents were used for billeting and also for support facilities; an access road was built to the existing road infrastructure; a dump for supplies, ammunition, and gasoline drums, along with a drinkable water and minimal electrical grid for communications and station lighting. [Excerpted from Wikipedia]. Construction was started on July 27th, 1944. The initial operational date was August 6th, 1944 as the airfield was vacated by September 5th, 1944. This package was tested in FSXA/P3D3/P3D4. By: Terry Flemming
Posted Feb 27, 2018 07:11 by uploader
 
London Ashford X-HD
London Ashford X-HD
35.69Mb (375 downloads)
London Ashford or Lydd as it's also knows is a small airfield in the south of England. The airport at this point in time is private traffic only and is perfect for flying into from France due to the airport being located outside the London TCZ. This scenery uses a few new design tricks to make the scenery "pop" and look that much better.
Posted Feb 26, 2018 04:28 by Mark Piccolo - Soarfly Concepts
 
KGRI, Central Nebraska Regional Airport USA
3.29Mb (207 downloads)
KGRI, Central Nebraska Regional Airport USA, for FSX. New setup of this airport I came across in one of my virtual flights. It is located three miles northeast of Grand Island, in Hall County, Nebraska. Tim van Ringen
Posted Feb 21, 2018 06:06 by uploader
 
FSX/P3D New York Airports X V2 DEMO
FSX/P3D New York Airports X V2 DEMO
39.36Mb (847 downloads)
New York Airports X V2 DEMO For FSX & P3D is a package containing 6 airports located in New York metropolitan areas - KJFK, KEWR and KLGA LaGuardia + 3 business & general aviation airports - KTEB, KCDW and KLDJ. This package is fully compatible with FSX/FSX:SE/P3Dv1/P3Dv2/P3Dv3/P3Dv4/FSW and with New York City X by Drzewiecki Design (v2.3 and higher), Manhattan X by Aerosoft, all ORBX products, all PILOT’S products and all Megascenery products. This is a fully functional freeware scenery, perfectly aligned with the full payware version. This ensures no problems with online (VATSIM, IVAO and multiplayer) flying in case some users have the payware scenery and some don't. The demo gives you all the terminals with low resolution textures and non-animated jetways plus a 4.8m/pix resolution photoreal ground for all 6 airports. It's equipped with an automatic installer, which means that the scenery will be automatically added to the Flight Simulator Scenery Library. Please uninstall all previous versions of the airports you may have installed before. Please make also sure that no duplicated AFCAD files are installed. Enjoy your virtual flying with Drzewiecki Design!
Posted Feb 21, 2018 04:12 by Drzewiecki Design
 
CYQM Greater Moncton Romeo Leblanc Int. Airport, New Brunswick
CYQM Greater Moncton Romeo Leblanc Int. Airport, New Brunswick
7.19Mb (389 downloads)
CYQM Greater Moncton Romeo Leblanc Int. Airport, New Brunswick, for FSX. Completely redone with custom buildings based on photos. Runway 6/24 extended to 10,000'.
Posted Feb 18, 2018 03:26 by uploader
 
Photoreal Scenery P3D/FSX Antonio 'Nery" Juarbe, ABO Package.
Photoreal Scenery P3D/FSX Antonio 'Nery" Juarbe, ABO Package.
244.51Mb (259 downloads)
Photorico Scenery Antonio 'Nery" Juarbe, ABO Package. The Airport: Antonio (Nery) Juarbe Pol Airport (IATA: ARE, ICAO: TJAB, FAA LID: ABO) is a public use airport located three nautical miles (6 km) of the central business district of Arecibo, Puerto Rico. It is owned by the Puerto Rico Ports Authority.This airport is included in the National Plan of Integrated Airport Systems for 2011–2015, which categorized it as a general aviation airport.. ABO was developed primarily for P3D v3.3 use, but a version for FSX is also included. The airport day and night textures were made from real pictures taken by photorico contributors on location in Arecibo, so the user will expirience some of the most realistic texture work done on a terminal for FS. Ground textures feature bumps and cracks as encountered on real apron, runway and taxiways. All lighting is custom made with an attached 3D model and effect. No SCASM lighst were used. Visit us at PhotoricoScenery.com and Facebook. By David Rosado
Posted Feb 15, 2018 04:08 by uploader
 
CYQX Gander International Airport, Newfoundland
6.83Mb (526 downloads)
CYQX Gander International Airport, Newfoundland, for FSX. Completely redone. All aprons/taxiways redrawn; runway R9-27 removed; custom terminal and apron markings based on the real thing. Sidney Schwartz
Posted Feb 14, 2018 04:31 by uploader
 
Forest Fires in Chile Pack 1 FSX - Chile
Forest Fires in Chile Pack 1 FSX - Chile
5.93Mb (494 downloads)
Forest Fires Pack 1 for Flight Simulator X This pack contains 21 forest fires located in the central and southern zones of Chile. Documentation and images are included for its location within the simulator. Install: Forest Fires Pack 1 1. Copy the files scenery: Incendio-Forestal-pack-1-x21-FSX-by_juan30005.bgl and vehículos_de_emergencia_pack1.bgl to: ..\Microsoft Flight Simulator X\Addon Scenery\scenery. 2. Open folder Info -open Forest Fires Pack1.pdf -open Locations of Forest Fires - Google Earth.KMZ -open Maps.pdf
Posted Feb 13, 2018 00:55 by juan30005
 
 
... 3 4 5 6 7 8 ...