25.07Mb (514 downloads)
The Arado Ar 240 was a German twin-engine, multi-role heavy fighter aircraft, developed for the Luftwaffe during World War II by Arado Flugzeugwerke. Its first flight was in 1940, but problems with the design hampered development, and it remained only marginally stable throughout the prototype phase. The project was eventually cancelled, with the existing airframes used for a variety of test purposes. This compilation of three variants of the Ar 240 is an FSX/P3D (version3 not 4) update of the FS2004 models by Chris Lampard, Morton and Shessy of SOH (reconnaisance, fighter bomber and nightfighter). It features FSX compatible all German gauges, a modified 2D panel and a new VC design. Smoke effect and new camera views added. New 2D panel configuration and camera views by Erwin Welker, VC design and configuration as well as smoke effect by Michael Pook. Thanks to the the designers of the model and to Erwin Welker for his cooperation.
Posted May 27, 2018 05:29 by Michael Pook
12.47Mb (936 downloads)
FSX/P3D V3-V4 Hawker Tempest VI The Tempest VI was an extremely effective air supremacy fighter, and many Luftwaffe jet pilots clearly stated it was the only Allied aircraft they feared in equal air-to-air combat. Although the Me-262 had a higher top speed, the Tempest's sheer, brute acceleration potential at low altitude enabled it to overtake a cruising Me-262 in straight level flight. The end of the war led to many aircraft programs being cut back intensively, and only 142 aircraft being completed. The Tempest VI holds the distinction of being the last piston-engined fighter in operational service with the RAF, having been superseded by jet propelled aircraft. Model by A.F.Scrub
Posted May 26, 2018 04:22 by A.F.Scrub
7.88Mb (655 downloads)
A new cockpit setup and flight updates for the beautiful DC Designs RF-61 Reporter for FSX and p3D. VC gauges have been replaced with new ones. New radio, autopilot, and GPS windows for navigation. Engine performance parameters have been modified. New exterior and VC lighting. Special thanks to Dean Crawford for his support. Info and instructions in the read me file. Enjoy! -Bob Erwin
Required files:required file
Posted May 25, 2018 01:44 by Bob Erwin
35.36Mb (796 downloads)
P3D and FSXA T-6G Texan pack 4. Set of 4 North American T-6 Texan's based on the following real aircraft - 41-16486 "No.1 BFTS Terrell Field", 41-15825 "No.1 BFTS Terrell Field", B190 "No.6 BFTS Ponca City Airport" and 41-15930 "No.4 BFTS Falcon Field". Please note that Fuel selector and magneto switch must be set in order to start engine. 3D model by David Eckert and Warwick Carter. Pilot 3D model by Michael Flahault. Added the superb textures by John Terrell. (details included). Please zip preview for larger images. more information included. Packaged by Chris Evans
Posted May 22, 2018 08:52 by chris evans
19.01Mb (592 downloads)
FSX/PD3 v3-v4 Seafire MkIII The definitive naval Spitfire, the Seafire Mk.III featured manually folding wings. The Mk IIIs served in the front line until 1946 and were then rapidly superseded by Griffon engined Mks XV, XVII and 47s. France equipped some of its Aeronavale squadrons with ex-Royal Navy Seafire IIIs and these saw front line service in Viet Nam in 1946/47. It is remembered as one of the finest low level fighters afloat in 1945 and one of the few that could tackle a Japanese Zero on equal terms.. GMAX model by A.F Scrub
Posted May 17, 2018 12:29 by A.F.Scrub
16.39Mb (502 downloads)
FS2004/FSX Seafire MkIIIb The Royal Navy’s Fleet Air Arm entered World War 2 under-equipped with modern aircraft., so a logical move was an adaptation of the RAF’s legendary Spitfire. The first Seafires, designated Mk. 1B, were rebuilds of Spitfire Vb’s and entered service in early 1942. The Mk IIIs served in the front line until 1946 and were then rapidly superseded by Griffon engined Mks XV, XVII and 47s. France equipped some of its Aeronavale squadrons with ex-Royal Navy Seafire IIIs and these saw front line service in Viet Nam in 1946/47. A handful of de-navalised MK IIIs served with the Irish Air Corps until 1960 and were almost certainly the last Seafires in service anywhere. Some historians have derided the wartime Seafire as too fragile and too sensitive to be an effective naval fighter and there is no doubt that its deck landing history reflects many accidents. It is, however, acknowledged as one of the finest low level fighters afloat in 1945 and one of the few that could tackle a Japanese Zero on equal terms. GMAX source included. Model by A.F Scrub
Posted May 15, 2018 10:17 by A.F.Scrub
66.35Mb (1721 downloads)
The Northrop RF-61C Reporter was the little known recon' sister of the famous P-61C Black Widow. One of the fastest airplanes of her era, the Reporter only served for a few years before being retired as the jet age was introduced. This is a comprehensive and detailed model with fully functioning Virtual Cockpit, dedicated flight dynamics, full animation and an instruction manual. Model by Dean Crawford, DC Designs. FDE by Pam Brooker. Fuel truck and engine effects by Mark Schimmer.
Posted May 9, 2018 05:29 by Dean Crawford
4.36Mb (165 downloads)
This folder contains textures only for the Douglas C-47 basepack for FS9 by Manfred Jahn and colleagues as C-47 serial 43-15073, built by Douglas in 1944. Special thanks at Jan Kees Blom for permitted me to adapted this Repaint.
Posted Apr 29, 2018 12:00 by bruno munier
22.92Mb (640 downloads)
The Fw 58 was a low-wing monoplane with two piston engines mounted in nacelles on the wing leading edges. The crew sat under an enclosed canopy. Aft of the flight deck, the fuselage was open to form a moveable machine gun station. The tailwheel undercarriage was retractable. The Fw 58 was widely used for training Luftwaffe personnel. It was also used as a VIP transport, ambulance, feeder airliner, photo reconnaissance, and weather research aircraft. It was built under license in Bulgaria, Hungary and Brazil. It was also operated by several countries such as the Netherlands, Romania, Croatia and Turkey. This is an FSX panel update for the Focke Wulf FW 58, previously designed for FSX by A.F. Scrub. The package includes a wheeled and a float version of the aircraft. Both the new entirely remodeled and enhanced VC and the 2D panel are now equipped with all authentic German gauges. smoke and VC light added. The wheeled variant's engines are now automatically fired off on the runway. All credits go to A.F.Scrub for the original model, new VC, gauge configuration as well as smoke and vc light by Michael Pook. This is the whole aircraft.
Posted Apr 28, 2018 09:44 by Michael Pook