Detailed user manual included. Contains two functions that are useful for ground-based operations: * Pushback. Allows user to control the pushback tug, and receive visual feedback regarding speed and turn direction. * Taxi AutoThrottle. Works similar to an in-flight autothrottle, but meant for taxiing. No more fiddling with throttle controls to find that sweet spot! Throttle levers are uniformly and smoothly operated. No more fiddling with throttle controls to ensure uniform thrust! Version 1.4 greatly improves the performance of the autothrottle and includes many minor fixes and additions. Please see the user manual for details.

Detailed user manual included. For each aircraft control surface selected, AxisViewer will show the position of the joystick axis attached to the control surface, and the actual position of the control surface according to FSX/P3D. The benefits are: * Positive feedback on Control Surface Position. Ever ask yourself "Self, just what is that autopilot/autothrottle doing, anyway?!" * Allow you to manually adjust the Axis Positions to match the Control Surface Positions, so that you don't get a nasty surprise (for example, sudden change in thrust) when the autopilot and/or autothrottle is disengaged. * Verification of joystick functioning and range of motion. * Clear indication of when "dead zones" are entered. You will see the Control Surface Position "snap" to a particular value as the Axis Position approaches the dead zone. Version 1.5 adds minor fixes and transparency. See the user manual for details.

This is a simple add on to any paint kit to make your paint from that new pristine look to an aircraft that has not been clean, washed, and beaten by the elements in a war time footing. It also applies to civilian aircraft such as Jet Liners and commuter aircraft, these usually do not get washed until there hourly schedule checkups. In this paint kit you will find the following items, the main “Weathering Kit” Photoshop file with all that you would need to take the BMP of the aircraft you are working on and add ageing or graphics to. Even aircraft that do not come with a paint kit can be modified since the layers are sizeable and erasable to the degree or size you need to make it fit the project you are working on. What is included in this kit. You have the following layers. 1. Palette Guide sized 4096 x 4096 to sample each layer before applying to your aircraft BMP 2. Eraser able weathering layer 4096 x 4096 once sized to your BMP size (EX: 2048 X 2048) paste over the BMP then set your eraser to about 25% add start erasing to the degree that you want to show on weathering. 3. Assorted Rivets layer 4096 x 4096 use these to replace any rivets that may have been damaged or destroyed in creating your paint these are cut able and paste able to your BMP. 4. Horizontal double Rivets layer 4096 x 4096 a line of rivets double stacked running horizontal on the BMP. 5. Horizontal dirt layer 4096 x 4096 Dirt in Horizontal position. 6. Dirt for aircraft body layer 4096 x 4096 assorted dirt that can be cut and pasted then erased down to proper level for the aircraft fuselage. 7. Exhaust smoke layer 4096 x 4096 smoke for marking the body wear hot exhaust gasses would show on aircraft that have extensive use. 8. Rivets 2 layer 4096 x 4096 a second layer of smaller rivets in physical size to help you realign those missing ones when painting. 9. Panel lines layer 4096 x 4096 replacement lines to use when adding graphics to you paint. 10. Fuel Spillage layer 4096 x 4096 sizeable, eraser able, fuel track from leaky reloading. 11. Tire Dirt 1 layer 4096 x 4096 a small tire dirtying layer. 12. Tire Dirt 2 layer 4096 x 4096 a larger tire dirtying layer. 13. Oil and grime layer 4096 x 4096 oil and hydraulics fluids leaking along service doors and control surfaces areas. 14. Vertical grime layer 4096 x 4096 Grime running in the Vertical direction. 15. Fuselage Grime layer 4096 x 4096 general dirt and grime to add to areas of your aircraft. 16. Dark shading layer 4096 x 4096 shading to add under wings or ailerons of aircraft. 17. Oil spots layer 4096 x 4096 leaking oil spots. 18. Paint chips 1 layer 4096 x 4096 assorted chips and dings on aircraft paints. 19. Paint chips 2 layer 4096 x 4096 a larger set of paint chips. 20. Large dirt layer 4096 x 4096 surface dirt on a larger scale Flags and Emblems: In this folder you will find many graphics and emblems used by the military and general aviation companies. Including USAF, USMC, NASA, EMS, USFS, EXXON, RNZAF, RAAF, RAF, RCAF, BORDER PATROL, USGS, and many other countries and agencies that you may want to paint. Aviation Placards: In this folder you find placards that are located throughout military and civilian aircraft. Pin-Ups: Just what the title states; a folder of small very attractive art work of the female form.NASA MARKINGS 1 and 2: All of the markings from NASA including their famous worm font.

Flight Simulator First Officer (FSFO) V3 is a generic copilot designed to work with aircraft that conform to Xplane (via XPUIPC), FS9, FSX and P3D SDK; in short, it adds a touch of realism while providing a copilot to share cockpit responsibilities. FSFO V3 does not require strict adherence to Standard Operating Procedures (i.e. scripts), reading lengthy manuals or precise speech. To that end, it can be as complex or simple as you want; for example, FSFO can complete the entire Before Start Checklist, or only those functions you chose not to accomplish. Regardless, he will check every switch to ensure it's placed in the correct position. Just hit connect and fly with confidence that your First Officer is helping you fly your complicated aircraft.

FSTrampFree 7.26 for P3D, FSX, FSX-SE, X-Plane 11 FSTrampFree is a moving map and derived from the flight management system FSTramp. It shows, without internet access, the world map with mountains, airports, navigation aids and aircrafts. In addition to the mouse pointer, the surface elevation is displayed. The app is an integrated module for the simulator and can be activated by pressing Ctrl+F12. Use the context menu to move the aircraft to any point in the world.

Gate A Nator is a freeware pre-flight tool for FSX and Prepar3D that allows to customize a flight plan before starting a flight simulation session. Can set departing Gate position and can load flight plans from FSX/FS2004, Prepar3D, LEVELD, PMDG, Quality Wings and Flight Sim Commander, or from an ICAO route, and using Airac cycles (FSBuild2 format) to read navaids from. Installation package installs Airac Cycle 1904, that can be after updated from Navigraph. Gate/parking database is auto created and updated from FSX or Prepar3D scenery base. It supports file save and export to FS2004, FSX, Prepar3D, LEVELD, PMDG, Quality Wings, Flight Sim Commander, XPlane 11 and Aerosoft Airbus/X extended. Complete instructions guide is included in the help file.

P3D FS2004 FSX Flight Analyzer Utility V5.10 Flight Data Recorder - Logbook. NOW also P3D supported. Very easy to use, just make a flight plan in the simulator or in this utility. What this program does: - quickly change the settings of FSX/Fs2004, such as time, date, fuel, weight, traffic etc. - start a failure sytem, such as gear, flaps, engine, etc. - freeze the time, so you can fly in a for everlasting sunset. - runway detecting system to see wich runways are in use. - flight analyzing/data recording from departure to parking at the gate. - When flight analysis is finished you can print a report, the report is automaticly saved as pdf File. - graphical landingchart. - record all your flights - quickly look to your FSX display settings (only FSX) and change them even before the flight simulator is running. - After a flight is finished FsQC saves your flight automaticly as 'FsQC last Flight', so you can continue the next day or hour.

New version: Updated installer and auto-update functionality along with chart downloaded changes to support browser updated security measures. FS Flight Builder is a utility for general aviation flying that will build flight files for FSX (flt), FSX Steam Edition (flt), and Prepar3D (fxml) based on waypoints and other data either entered manually or imported from SkyVector using the Plain Text Link information. Among other things, you can select your starting position, aircraft, and VFR or IFR flight plan. One of the most interesting features of the application is that it will include a Briefing file, added to the aircraft's built-in kneedboard, that will include departure and destination airport information (runways, frequencies, weather, and charts) as well as navigation frequencies along the route. Have you ever started up flight simulator and wondered “where do I want to go today”? The new Destination Chooser functionality can help to solve that problem. The screen allows you to enter your departure airport and choose various parameters for your destination (like min and max distance, tower availability, ILS availability, runway length requirements, etc.). How to install: Run Setup.exe and simply follow the installation wizard. When you run the application for the first time (make sure your flight simulator is not running), it will build the database from your flight sim data. Be patient. It could take a few minutes. It will attempt to locate your flight sim folder and flight plan folders automatically. If it can't find them, however, you'll need to select them from the options menu. IMPORTANT! Because FS Flight Builder saves to your Flight Sim directories, it MUST be run in Administrator mode. To do this, right-click on the desktop icon, select the Compatibility tab, and check the Run as administrator checkbox. IMPORTANT! The airport and navaid databases for FS Flight Builder are built using Peter Dowson's excellent Make Runway utility and the equally excellent BGL2XML utility from ScruffyDuck Software. The links to these utilities are below. They must be added to the main FSX or Prepar3D folder. Peter Dowson's website: http://www.schiratti.com/dowson.html ScruffyDick Software website: http://www.scruffyduck.org/bgl2xml/4584282773 It's also important to note that Version 1.7 of BGL2XML is required for Prepar3D V3 and higher. Author: Tom Arduini The latest installer can always be found at http://www.arduiniwebdevelopment.com/fsflightbuilder/fsflightbuilder.zip

Demo - Free for limited time use. Addit! Pro is a comprehensive addon manager for Lockheed Martin's Prepar3D. Easily install, manage and remove aircraft, adventures, flights, flight plans, gauges, missions, panels, AI airport and facilities data, scenery, sounds, textures, videos, weather and more! Simple wizard-based interface makes installing and removing addons a breeze. Comprehensive addon management allows you to archive, rebuild and remove addons. Addit! Pro is fast and easy--no unzipping or file copying is necessary. Modify all aircraft, panels, sounds and scenery. Let Addit! Pro tackle the tough chores and spend your time flying. Shareware--please register to install an unlimited number of add-ons. Supports Prepar3D v4, v3, v2, and v1. By Joseph Stearns.