Mar 29, 2024 |
Home Site Map Upload a File Forums Search Donate Help
All Files Prepar3d Civil Jets Gliders and Ultralites Helicopters Military Misc Panels Payware Props Scenery Terrain Mesh Utilities Vintage
Prepar3d > Props > Page 19
 
 
 
FSX/P3D Hawkins & Powers C-97G Stratoairtanker Textures
FSX/P3D Hawkins & Powers C-97G Stratoairtanker Textures
7.41Mb (435 downloads)
This repaint is designed to be used with Manfred Jahns' and company's FSX native, P3D(1-4) C-97 package. This repaint is NOT for FS2004 models. The Boeing C-97 or 377 Stratocruiser as it was also known is a gigantic radial engine transport that served as a military transport as well as a civilian airliner from the late 1940s into the 1960s. After their service was up, many sat around in the western US boneyards until eyes fell on them to become fire bombing airtankers. hawkins & Powers acquired some to turn into airtankers. Which turned out to be a labor intensive process. T-97 was a second chance airtanker, it previously was T-84. It had a massive for it's time 4,000 gallon tank installed in the belly. Making it by far, the largest air tanker in service. Even by today's standards it's still large. This however, led to it's likely downfall. It's shear size at the time limited it's use. Only being used on a few fires in Alaska and other areas in the western US and the Yellowstone Fire Storm in 1988 were it's only notable uses before it's eventual demise. It now sits at Hawkins & Powers' Museum in Greybull, WY. Repaint by: Nicholas Mitchell.
Required files:
required file
Posted Feb 28, 2020 08:14 by Nicholas Mitchell
 
FSX/P3D/FS2004 Air Maldives Convair 440 1975 Textures
FSX/P3D/FS2004 Air Maldives Convair 440 1975 Textures
14.07Mb (218 downloads)
This is a repaint of the Convair 440 in Air Maldives colors. The freeware CalClassic Convair 440 by Greg Pepper and Tom Gibson is needed for this repaint. This repaint was tested on FSX-SE, and should work on FSX & P3Dv3. FS2004 BMP textures are also included. Air Maldives operated only the two CV-440s during its short existence. This repaint is of 8Q-AMIOI, 'Flying Fish 1'. HISTORY: Air Maldives came into existence in 1974. Two Convair CV-440 Metropolitans were acquired from Caribbean United Airlines, and it started scheduled services on October 9 1974. Apart from an internal route network, it also flew internationally to Colombo, Sri Lanka. In 1976 it went through reorganization. However, in May 1977, the Maldivian government grounded its two Convair 440s, and freezed its accounts, forcing it to cease operations. A new carrier, Maldive International Airlines, was formed as a subsidiary of Indian Airlines Corporations, and began domestic operations in 1981. However, it was also unsuccessful, and was succeeded on September 30, 1984 by Maldives Airways, a new state operation with ambitious Mideast backing.
Download here (external link)
Posted Feb 24, 2020 03:11 by Ted Giana
 
P3D/FSX HC-130H Cal Fire Texture Pack
P3D/FSX HC-130H Cal Fire Texture Pack
4.68Mb (416 downloads)
This small repaint pack was created mainly for P3D users, and the stock Captain Sim C-130 provided with P3D. But the liveries should work in FSX with some modifications to the aircraft.cfg entries provided in this pack. As P3D and FSX models differ if these are to be applied to the Captain Sim C-130X pack aircraft. These textures are designed to replace the Cal Fire C-130 in my original C-130 airtanker texture package, but that package is not required. Updates to the livery on T-118 were made to accurately represent the final livery design for Cal Fire. I have also included T-116, which will be the second Cal Fire HC-130H to enter service. The Cal Fire Hercules' are expected to enter service some time in mid-late 2021, equipped with Coulson's RADS XXL 4,000 gallon constant flow tanks. The same system in their C-130s. Cal Fire came to acquire these HC-130Hs from the USFS' now ended tanker program after only a few seasons of use. The USFS had acquired them originally from the US Coast Guard in exchange for surplus C-27J Spartans from the USAF. Cal Fire has acquired all 7 aircraft, which they plan to convert into LATs (Large Air Tankers). Repaints by Nicholas Mitchell.
Posted Feb 22, 2020 03:47 by Nicholas Mitchell
 
FSX/P3D (v1-4) JBK V3 DC-4 Airtanker Texture Pack
FSX/P3D (v1-4) JBK V3 DC-4 Airtanker Texture Pack
18.46Mb (443 downloads)
This repaint Pack is for the V3 JBK DC-4 pack, in particular the airtanker version. These are NOT for the merlin powered aircraft. These will work with the FSX Version. But I have included a link to the P3D v4 updated models. These repaints will work on both. But likely NOT the FS2004 version. Therefore this is for the FSX/P3D versions ONLY. The DC-4 saw service as an airtanker for decades in the United States and Canada. Sadly, policy changes with the USFS forced the DC-4 series of aircraft into retirement, rather than their age. The amount of surplus aircraft and parts made maintaining the Skymasters possible all the way until their forced retirement. Many were forced to be converted back to freighters or sold as scrap. Ironically, it is highly likely that the flying examples still flying as rural freighters or museum pieces were airtankers at some point. And is likely the only reason they are still airworthy today. This pack represents 6 operators of the DC-4/C-54 series of airtankers. And 10 total liveries for the following operators. Aero Union, Aero-Flite, California National (Cal Nat), Buffalo Airways, Ardco, and TBM Inc. Repaints by Nicholas Mitchell. Note, these will only work on the P3D V4 version if the model has been updated. The FSX version is required for those updates.
Posted Feb 9, 2020 01:41 by Nicholas Mitchell
 
FSX/P3D3/FS2004 KLM 803 Viscount 1966 Textures
FSX/P3D3/FS2004 KLM 803 Viscount 1966 Textures
6.40Mb (220 downloads)
This is a repaint of the Viscount 803 in KLM 1966 colors. The freeware Vickers Viscount 800 for FSX by Jens B. Kristensen (JBK) is needed for this repaint. Textures are 32bit dds for FSX/P3D3 users. FS2004 DXT3 BMP textures are included as well for FS2004 users who have the FS2004 version. This repaint was tested on FSX-SE. It should also work on FSX, and P3Dv1-3. In June 1955, KLM placed an order for nine Vickers V.800 Viscounts, making it the first foreign company to order the type. They were to replace the Convair CV-340s and intended for use on the European network and a number of shorter intercontinental services to the Middle East and northern Africa. The nine Viscounts were delivered between 6 June and 23 December 1957. All aircraft were delivered in the old KLM "The Flying Dutchman" color scheme. From the early 1960s, all aircraft were equipped with the new KLM color scheme with the light and dark blue band across the hull with the slashes in the tail and in addition, red KLM with emblem. From October 1965 to November 1966 the KLM Viscounts gradually disappeared from the fleet. They were all sold to Aer Lingus of Ireland. A new color scheme was introduced in 1966, the blue stripes and white ball as depicted in this repaint. The few Viscounts that were still used by KLM, were repainted in this new color scheme in 1966.
Required files:
required file
Posted Feb 5, 2020 03:44 by Ted Giana
 
FSX/P3D3/FS2004 KLM L-188 Electra 1966 Textures
FSX/P3D3/FS2004 KLM L-188 Electra 1966 Textures
7.42Mb (257 downloads)
This is a repaint of the L-188 Electra in KLM 1966 colors. The freeware L-188 Electra by Libardo Guzman is needed for this repaint. Textures are 32bit DDS for FSX/P3D3 . FS2004 DXT3 BMP textures are included as well. This repaint was tested on FSX-SE. It should work on FSX, FS2004, & P3Dv3. On February 29, 1956, KLM signed a contract with Lockheed for the delivery of 12 Lockheed L-188C Electras. KLM needed a number of aircraft with a larger flight range and greater capacity than its Vickers Viscounts and the carrier was not convinced that the Se-210 Caravelle was profitable, which proved to be false. KLM was thus the only European user of the L-188 as most major European airlines decided to purchase the Caravelles. The twelve L-188C Electras were delivered to KLM between October 10 1959 and December 14 1960. This is a repaint of PH-LLD which was delivered to KLM on 16 December 1959. In February 1969 it was bought by the U.S. carrier Universal Airlines, and converted to a freighter.
Required files:
required file
Posted Feb 5, 2020 03:43 by Ted Giana
 
FSX/P3D ATR72 SAS Scandanavian Airlines
FSX/P3D ATR72 SAS Scandanavian Airlines
58.49Mb (3420 downloads)
FSX/P3D ATR72 210 SAS Scandanavian Airlines. SAS is based at 3 Scandanavian capital airports Copenhagen Kastrup, Oslo Gardermoen, Stockholm Arlanda and currently have 8 ATR72 in their fleet. Model and VC by Virtualcol. Ex payware. Textured and assembled for P3Dv4.5 and should be ok in FSX and earlier P3D versions by Chris Evans.
Posted Feb 4, 2020 01:13 by chris evans
 
P3D JBK Ilyushin IL-14M Civil Aviation Administration of China Package
P3D JBK Ilyushin IL-14M Civil Aviation Administration of China Package
22.24Mb (508 downloads)
JBK Ilyushin IL-14M Civil Aviation Administration of China (CAAC) package for P3D. Author by Jens B. Kristensen ,Kristensen,Kazachek. Textures made by Whisky.For P3D V4.5
Posted Jan 16, 2020 04:01 by liao yitong
 
P3D/FSX Douglas DC-7 Airtanker Pack
P3D/FSX Douglas DC-7 Airtanker Pack
137.33Mb (1371 downloads)
This extensive modification to Cal Classic Propliner's DC-7 into an airtanker was done with their permission. The base DC-7 for FSX/P3D3 is required for the panel, gauges, effects, and documentation to appear correctly. The DC-7 has seen many years of service as an airtanker. Despite the USFS deciding to no longer contract the DC-7 for aerial firefighting in 2003, stating it was too old Several have remained flying as airtankers for nearly 2 decades after that decision on state contracts mainly in the Pacific Northwest. The DC-7 is large and fast. Despite it's age, the DC-7 is able to carry 3,000 gallons of retardant and cruise at high speeds. It's 350 mph cruise speed is slightly affected by the external tank. But it is still quite fast and has remained a viable tanker for decades and is likely the reason for it being the last remaining radial engine tanker in service in the United States. Only a few aircraft remain flyable, owned by Erickson Aero. This pack contains 2 model versions and repaints representing 3 operators. Butler Aviation, Erickson Aero, and T&G Aviation. There are a total of 7 aircraft represented. Aircraft should be compatible with FSX up to P3D v4.5. Original aircraft by Jens Kristensen, Tom Gibson, and Greg Pepper. Aircraft donor part conversions by Bjoern Kesten. Sounds by Jon Jefferys. Airtanker modification and repaints by Nicholas Mitchell.
FSX/P3D Base Model for DC-7 Airtanker Pack:
http://www.calclassic.com/files/dc7_cc_FSX.zip
Posted Jan 15, 2020 05:18 by Nicholas Mitchell
 
FSX/P3D Douglas DC-6 Airtanker Pack
FSX/P3D Douglas DC-6 Airtanker Pack
105.87Mb (1052 downloads)
This extensive airtanker modification pack are modifications of Cal Classic Propliners DC-6s with their permission. Cal Classic's base DC-6s (CB-16 and CB-17) models are required for these aircraft's panel, gauges, effects, and documentation to appear properly. This package includes 3 model versions of the DC-6 and custom repaints that represent Macavia/Sis-Q, Sis-Q, Securite Civile, TBM Inc., and Conair. Retardant effects are not included. The DC-6 operated across the world as an airtanker. It was used in the United States, Canada, and France. Depending on the version, operator and tank design the DC-6 could carry anywhere from 2,000 gallons to 3,000 gallons of retardant. A special feature of the DC-6 was it's ability to reverse it's propellers into beta or reverse thrust. Something rarely found on radial engine aircraft. A feature that also found it's way to the DC-7. The DC-6's last operator was Conair finally retiring their last tanker in the early 2000s. US service as well as France did not make it out of the early-mid 1990s. Only flying versions that remain are rural transports and museum pieces. Most have become boneyard relics. Sadly, no airtanker versions remained flyable. These should be compatible for FSX up to P3D v4.5. Original aircraft by Jens Kristensen, Tom Gibson, and Greg Pepper. FSX/P3D converted donor parts by Bjoern Kesten. Sounds by Jon Jefferys and Gary Jones. Airtanker modifications and repaints by Nicholas Mitchell
FSX/P3D Base Model 1 for DC-6 Airtanker Pack:

http://www.calclassic.com/files/dc6_cc_FSX.zip

FSX/P3D Base Model 2 for DC-6 Airtanker Pack:
http://www.calclassic.com/files/dc6b_cb17_cc_FSX.zip

Posted Jan 15, 2020 04:45 by Nicholas Mitchell