Quick Notes to Fly the Spartan 1. Start engine 2. Set flaps 15 if on short runway, otherwise optional 3. Trim elevator to +3.5 and begin rollout 4. Rotate at <90 MPH 5. Retract gear and accelerate to 105+ 6. Retract flaps 7. Trim for 1000fpm climb working your way down to +1.8 degrees elevator trim 8. Once desired altitude is reached, click ALT (Hold) on the AP 9. Reduce MP to 30" and RPM's to 2000 for cruise ***To view/remove VC yoke, Click the rectangular metal band around the yoke base.*** The pilot checks out when the battery switch is off. If you do not have rudder pedals and/or wish to have a steerable tailwheel, change the aircraft.cfg Contact point 0 as noted there. (Use Notepad to edit)