FS2004 - photoreal panel Airbus A-380 with full interior views and wingviews - by Horst Paetzold


This panel was tested with the FS2004-A-380 models of Mike Stone, Robert Versluys and Camil Valiquette.
The wingviews-setting is made for the plane of Robert  Versluys, Mike Stone's plane shows no wingviews
and the plane of Camil Valiquette shows wingviews slightly different ( you can adjust it yourself by zooming
in or out)


All switches for battery, avionics and lighting are in the overhead-panel.


Engine Starters are on the console-panel below the throttles.
Fuel-run and -cutoff has to be made by keyboard-controls, that means 
CTRL+SHIFT+ F4 has to be engaged before pressing the starters until engine-starts
and to cutoff the engines CTRL+SHIFT+F1 is used.


I n s t a l l a t i o n
=============

		Unzip panel.zip into the panel-folder of your aircraft (make backup before)

		Unzip gauges zip (with folders enabled/very important!!!) into FS9/gauges-folder
			              ============================


The settings for "RADIOS" in the aircraft.cfg should read as follows:

[Radios] 
Audio.1=1
Com.1=1, 0
Nav.1=1, 0, 1
Nav.2=1, 0, 0
Adf.1=1
Transponder.1=1
Marker.1=1


What is from me:	Only the bitmaps, some repainted gauges and the panel-arrangement


Credit therefore goes to all gauge-designers and here specially to mike stone.

Good flights for all of you !!!


Horst Paetzold


horstcloudflyer@aol.com