The included file is a self-extracting ZIP that will install all files in the proper folders of your CFS2 main directory. Simply run the self-extracting file, and point it at the directory of your hard-drive that contains your CFS2 main directory. EXAMPLE: If you have a default CFS2 installation, you would point the self-extractor at C:\Program Files\Microsoft Games\Combat Flight Simulator 2.

After installation the campaign will appear in your CFS2 Campaigns menu, and the two F-86s will appear in your Free Flight menu.
The missions are also playble individually from the Single Missions menu.

- Open the CFS2.cfg file in Notepad.
- Scroll down to the [REALISM] section.
- Change StressDamage=True entry to read StressDamage=False.
- Save and close the file. That's it.

This option cannot be accessed from any in-program menus, and can be changed back manually or left in place permanently.

1. (Strongly Suggested) Replace your existing CFS2\INFO\airbases.dat file with the one provided in this package. You may backup your original, if you wish for reuse later. This is only needed, if it is customized.
If yours is a stock file, you can use our replacement permanently because it contains the stock CFS2 airfields plus the Korean airfields. Simply PASTE it into your CFS2\INFO folder and it will overwrite the existing file.

OR

2. (Less Reliable Option) Add the Korean airfield entries listed below to the airbases.dat file in your CFS2\INFO folder.
To do so, open your airbases.dat file in Notepad. Make a space between the last runway entry and the small rectangle symbol (make sure not to delete this symbol).
Copy/Paste the following new entries into the the space you have made. You MUST then renumber the [runway.xxx] and id=xxxx fields in each these new entries sequentially, beginning with the corresponding numbers in your last original entry plus 1.
Example: If your last original entry was [runway.138] with id=8060, then you would begin renumbering the new entries with [runway.139] and id=8061

Understand that there CANNOT be any duplicate runway or id numbers in your airbases.dat file:

[runway.126]
id=8053
name=Korea Suwon
base_lat=N37 14.65
base_lon=E127 0.00
base_alt=85
heading=146
allegiance=0
units_across=1
takeoff_start_pos=-500,0
takeoff_stop_pos=1600,200
landing_start_pos=5000,350
landing_touchdown_pos=500,0
landing_stop_pos=-250,0

[runway.127]
id=8054
name=Korea Sokcho
base_lat=N38 8.84
base_lon=E128 36.03
base_alt=99
heading=40
allegiance=0
units_across=1
takeoff_start_pos=-650,0
takeoff_stop_pos=1600,200
landing_start_pos=5000,350
landing_touchdown_pos=500,0
landing_stop_pos=-250,0

[runway.128]
id=8055
name=Korea Kanam-Ni
base_lat=N37 49.89
base_lon=E126 59.40
base_alt=296
heading=173
allegiance=0
units_across=1
takeoff_start_pos=-575,0
takeoff_stop_pos=1600,200
landing_start_pos=5000,550
landing_touchdown_pos=600,0
landing_stop_pos=-250,0

[runway.129]
id=8056
name=Korea Mokpo
base_lat=N34 45.26
base_lon=E126 23.46
base_alt=28
heading=50
allegiance=0
units_across=1
takeoff_start_pos=-650,0
takeoff_stop_pos=1600,200
landing_start_pos=5000,350
landing_touchdown_pos=600,0
landing_stop_pos=-650,0

[runway.130]
id=8057
name=Korea Yangku
base_lat=N38 5.31
base_lon=E127 59.20
base_alt=677
heading=163
allegiance=0
units_across=1
takeoff_start_pos=-450,0
takeoff_stop_pos=1600,200
landing_start_pos=5000,550
landing_touchdown_pos=600,0
landing_stop_pos=-450,0

[runway.131]
id=8058
name=Korea Yechon
base_lat=N36 37.72
base_lon=E128 21.37
base_alt=355
heading=89
allegiance=0
units_across=2
takeoff_start_pos=-650,0
takeoff_stop_pos=1600,200
landing_start_pos=5000,350
landing_touchdown_pos=600,0
landing_stop_pos=-950,0

[runway.132]
id=8059
name=Korea Wonju
base_lat=N37 26.41
base_lon=E127 57.71
base_alt=332
heading=26
allegiance=0
units_across=2
takeoff_start_pos=-950,0
takeoff_stop_pos=1600,200
landing_start_pos=5000,550
landing_touchdown_pos=600,0
landing_stop_pos=-950,0