FSX/P3D Boeing 777-8F Cargolux package. Cargolux is based in Luxembourg and is the world's largest pure cargo airline, with destination all over the globe. Cargolux has orders for 10 Boeing 777-8F with deliveries expected to begin in 2027. Updated with new VC and more. Realistic CFM soundpack added. Original VC by Jacob Kubique. Converted to FSX native by Zachary777. VC updates by Speedbird77 with gauges by G. Munro and Ken Wiggington. See Credits for more. Textured and assembled for P3d v5.3 by Chris Evans. Should also work in FSX nd previous P3D.

Boeing 777-300ER Southwind Airlines is a Turkish airline for taking those well deserved get always. The airline is headquartered in Antalya. According to the internet Southwind fly's to 6 different Countries. Enjoy flying this leisure liner!This is the Skyspirit Boeing 777-300ER with textures by Chris Evans. Revised panel for P3D v6.

MSN 32336 was built during 2002, and delivered to Singapore Airlines as 9V-SVL in November 2002. After serving with them, she went to Air New Zealand, as ZK-OKI, in May 2018, with minor alterations to the Singapore Airlines scheme. She joined Surinam Airways as PZ-TCU in December 2019, adopting the colour scheme shown. ‘TCU was with them until January 2022, when she was returned to Boeing. Boeing used her as their “ecoDemonstrator”, wearing a special colour scheme, until she was stored at Victorville in September 2024. Painted on to the SkySpirit Boeing 777-200ER model, this repaint shows PZ-TCU as she was in service with Surinam Airways.

FSX/FS2004/Acceleration Motorcycle Triumph Rocket 3R. This beautyful heavy cruiser /320 kg) has a 2.5 liter three cylinder inline engine with 182 PS. The airfiles let you enjoy the driving on straight roads in high speed. But curvy roads are a real challenge. The model can be parked without driver (using Wingfold). When driving you can control the roll angle with the joystick. FSX cameras provide beautyful views including close view to the incredibel engine. The model comes with 2D-panel and VC. FSDS 3.5 model by Erwin Welker

FSX and P3D Boeing 777-300ER Southwind Airlines package. Re-animated and revised virtual cockpit. Southwind is a Turkish leisure airline based in Antalya and flies to destinations around Europe, Asia, the Middle East and Russia. Southwind Airlines currently 1 Boeing 777-300ER. Model by Hiroshi Igami, Yosuke Ube with support of Posky members. Original VC by Jacob Kubique. Converted to FSX native by Zachary777. VC updates by Speedbird77 with gauges by G. Munro and Ken Wiggington. See Credits for more. Textured and assembled and tested in P3D v5 by Chris Evans. Should also work in FSX and other P3D versions.

Version 2.0 covers landclass across the entire greater Houston area, with a large increase in LOD. This version significantly tightens up and improves the landclass from version 1.0, and adds a vast amount of scenery objects that brings the Bay Area-KEFD area into the modern era. This improves and adds a highly accurate runway 17 approach with accurate placement of buildings and scenery around the year 2011-modern day. In addition, includes several new files including a new airport/helipad via Houston Clear lake regional airport, T41 La Porte Municipal and surrounding shipping ports, Kemah Boardwalk, and a giant improvement to Johnson Space Center Houston. Rundway 35 and Runway 22 landclass is significantly increased, and more accurate as well. You can fly an accurate VFR approach or set up an ILS for any one of KEFD's runways with ease with this improvement.

Messerschmitt Bf 109E-1/B by Design Team Daedalus Unit: 9./JG 27 May, 1941 Gela, Sicily Pilot: Unknown To improve on the performance afforded by the 690 hp Jumo 210 of the earlier Bf 109 versions, the larger, longer 1080 hp Daimler-Benz DB 601A engine was used. As a consequence, the nose, cooling system, and wings had to be redesigned resulting in the classic Bf 109E series. In late 1938, the Bf 109E entered production. It entered general service with the Lufwaffe in the spring of 1939. A total of 1,183 E-1 were built, 110 of them were E-1/B fighter bomber versions. The E-1/B was a small batch of E-1s that became the first operational Bf 109 fighter bomber, or Jagdbomber (usually abbreviated to Jabo). These were fitted with an ETC 500 bomb rack, carrying one 250 kg (550 lb) bomb. There were many small differences between indivual E-1s because the E-1 was often modified in the field by groundcrew and rear area repair depots. The production standard was lightly armed with two 7.92mm MG17s above the engine and two in the wings and had no pilot armor. Mods included types of pilot head armor,E-4 type squared canopies, E-7 type pointed spinners, etc. So each model we have created has its own unique features. This aircraft was modified with pilot head armor flate plate plus curved top, a capped nose spinner, and had a rear view mirrow fitted to the top of the front windscreen Pstrany is the primary model author with some small model refinement and additions by Captain Kurt as the model was collaborated on during development. Captain Kurt created the textures for each, the 2D instrument panel, the individual .dp files, air files and aircraft.cfg files.

Messerschmitt Bf 109E-1/B by Design Team Daedalus Unit: II/LG 2 November 30, 1940 Crash landed at Worth Matravers, Dorset, England Pilot: Uffz. Paul Wacker To improve on the performance afforded by the 690 hp Jumo 210 of the earlier Bf 109 versions, the larger, longer 1080 hp Daimler-Benz DB 601A engine was used. As a consequence, the nose, cooling system, and wings had to be redesigned resulting in the classic Bf 109E series. In late 1938, the Bf 109E entered production. It entered general service with the Lufwaffe in the spring of 1939. A total of 1,183 E-1 were built, 110 of them were E-1/B fighter bomber versions. The E-1/B was a small batch of E-1s that became the first operational Bf 109 fighter bomber, or Jagdbomber (usually abbreviated to Jabo). These were fitted with an ETC 500 bomb rack, carrying one 250 kg (550 lb) bomb. There were many small differences between indivual E-1s because the E-1 was often modified in the field by groundcrew and rear area repair depots. The production standard was lightly armed with two 7.92mm MG17s above the engine and two in the wings and had no pilot armor. Mods included types of pilot head armor,E-4 type squared canopies, E-7 type pointed spinners, etc. So each model we have created has its own unique features. This aircraft was modified with an E-4 squared canopy, a flat plate pilot head armor and an antenna mounted pennant. Pstrany is the primary model author with some small model refinement and additions by Captain Kurt as the model was collaborated on during development. Captain Kurt created the textures for each, the 2D instrument panel, the individual .dp files, air files and aircraft.cfg files.

Messerschmitt Bf 109E-1 by Design Team Daedalus Unit: 9./JG 77 May, 1941 Crash landed at Malaoi, Peloponnese, Greece Pilot: Unknown To improve on the performance afforded by the 690 hp Jumo 210 of the earlier Bf 109 versions, the larger, longer 1080 hp Daimler-Benz DB 601A engine was used. As a consequence, the nose, cooling system, and wings had to be redesigned resulting in the classic Bf 109 series. In late 1938, the Bf 109E entered production. It entered general service with the Luftwaffe in the spring of 1939. A total of 1,183 E-1 were built, 110 of them were E-1/B fighter bomber versions. There were many small differences between individual E-1s because the E-1 was often modified in the field by groundcrew and rear area repair depots. The production standard was lightly armed with two 7.92mm MG17s above the engine and two in the wings and had no pilot armor. Mods included types of pilot head armor,E-4 type squared canopies, E-7 type pointed spinners, etc., but changing the wing MG17 armament required new different wings. So each model we have created has its own unique features. This aircraft was modified with an E-4 squared type canopy, curved pilot head armor and a capped spinner. By the time the later Bf 109E-4 and Bf 109E-7 marks were equipping the Jagdgeschwaders a program was initiated to withdraw and remanufacture the surviving E-1s to either full E-4 or E-7 standard. Pstrany is the primary model author with some small model refinement and additions by Captain Kurt as the model was collaborated on during development. Captain Kurt created the textures for each, the 2D instrument panel, the individual .dp files, air files and aircraft.cfg files.

Messerschmitt Bf 109E-1 by Design Team Daedalus Unit: 9./JG26 March 24 1940 St. Inglvert France Pilot: Fw. Artur Beese To improve on the performance afforded by the 690 hp Jumo 210 of the earlier Bf 109 versions, the larger, longer 1080 hp Daimler-Benz DB 601A engine was used. As a consequence, the nose, cooling system, and wings had to be redesigned resulting in the classic Bf 109 series. In late 1938, the Bf 109E entered production. It entered general service with the Luftwaffe in the spring of 1939. A total of 1,183 E-1 were built, 110 of them were E-1/B fighter bomber versions. There were many small differences between individual E-1s because the E-1 was often modified in the field by groundcrew and rear area repair depots. The production standard was lightly armed with two 7.92mm MG17s above the engine and two in the wings and had no pilot armor. Mods included types of pilot head armor,E-4 type squared canopies, E-7 type pointed spinners, etc., but changing the wing MG17 armament required new different wings. So each model we have created has its own unique features. This aircraft had a flat plate pilot head armor retrofitted. By the time the later Bf 109E-4 and Bf 109E-7 marks were equipping the Jagdgeschwaders a program was initiated to withdraw and remanufacture the surviving E-1s to either full E-4 or E-7 standard. Pstrany is the primary model author with some small model refinement and additions by Captain Kurt as the model was collaborated on during development. Captain Kurt created the textures for each, the 2D instrument panel, the individual .dp files, air files and aircraft.cfg files.