 |
| FS2004/2002
Yakovlev Yak-38 "Forger-A".
Yakovlev developed the Yak-38 based on Yak-36 V/STOL aircraft.
Yak-38 was the first production vertical takeoff/landing aircraft
built by the Soviet Union. Yak-38 was built to operate from
the Soviet medium-sized Kiev class aircraft carriers. Two jet
engines vertically installed behind the control seat generate
the lift power. After the door equipped up and down is opened,
these engines are worked. There are 16 air intakes that open
with the spring in the door above. Another one turbo-jet engiine
built into the body is generated in the cruise power. A total
of about 230 aircraft were built. by Kazunori Ito. 1.4MB |
|
|
|
| FS2004
Lockheed C-130 Hercules USAF.
Military transport and transport aircraft.Full moving part (including
doors, ramp). Full interior, VC, panel, sound. Gmax model, textures,
panel - Vladimir Zhyhulskiy. 1.5MB |
|
| |
| FS2004
Boeing KC-135R Stratotanker
The famous 707 continues to serve the USAF many years after
being retired from frontline commercial service, as the KC-135
Stratotanker. The base textures folder in this zip file contains
base (unpainted) texture files for use in repainting. By Mike
Stone. 1.2MB |
|
 |
|
 |
| FS2004/2002
Sukhoi Su-25K/TM(Su-39)
Frogfoot Su-25 is an aircraft developed based on almost the
same specification as A-10 of an U.S. Air Force. A very orthodox
form by the bimotored engine of the low output is adopted and
there was no radical like A-10. However,All almost the development
demands of low-cost and easy productivity and high survivability
by heavy armor and a strong ground offensive capability etc.
are achieved. A lot of Su-25 was granted to the friendly country
in the old Soviet Union. However,There are not too a lot of
the entire numbers of production. About 240 go into commission
at present to Russia. The newest model is Su-25TM(Su-39) that
strengthened an electronic equipment. Four kind of airframes
and four kinds of painting examples are included in this file.
by Kazunori Ito. 4MB |
|
 |
| FS2004/2002
Saab JA37 Viggen
This aircraft is an interception and the ground offensive fighter
of a Swedish air force. This model did the upgrade for FS2004
to the airframe for FS2000. The reflection of the airframe,
the opening and shutting of the canopy, and the movement of
the wheel etc. were added. The panel is not included. by Kazunori
Ito. 812K |
|
 |
| FS2002/FS2004
McDonnell XF-85 Goblin The
XF-85 parasite fighter was developed to protect B-36 bombers
flying beyond the range of conventional escort fighters. If
attacked by enemy aircraft, the bomber would lower the Goblin
on a trapeze and release it to combat the attackers. After the
enemy had been driven away, the parasite fighter would return
to the bomber, hook onto the trapeze, fold its wings, and be
lifted back into the bomb bay. by Kazunori Ito. 1.3MB |
|
|
|
|
FS2004
Fairchild Republic A-10A "Warthog" 81-0963 Spangdahlem
The A-10A Thunderbolt II is the first Air Force aircraft specially
designed for close air support of ground forces. They are
simple, effective and survivable twin-engine jet aircraft
that can be used against all ground targets, including tanks
and other armored vehicles. This particular aircraft is the
s/n 81-0963, USAFE 52d Fighter Wing, 81st Fighter Squadron,
Spangdahlem Air Base, Germany. This Model comes with 3D gear
bay's, full moving parts (landing gear, nose wheel, spinning
wheels, control surfaces, airbrakes, and pilothead). Aircraft
made with FS Design Studio Pro. Original model: Kirk Olsson.
Repaint : Marcel Verdult. Sound and Panel: Webinblue. Minor
Modifications and Package: Maverick. Special thanks: Marcel
Ritzema. 8.3MB
Important
note: This was originally a FS2000 model. When initially
prompted by FS2004 to disable non compatible features click
NO.
|
|
 |
| FS2004/2002
BAe Harrier GR.7
The Harrier GR7 is a single seat, multi-role combat aircraft
that is capable of operating in extreme environments and from
a wide selection of locations, including deployed air bases
and aircraft carriers. The unique feature about the Harrier
is its ability to vector its Pegasus engine thrust. This vectored
thrust enables it to operate from short landing surfaces and
to take off and land vertically. This model was made for reproduction
of a lot of movable parts and making of shape to stick to even
detail. The panel is not included in this file. by Kazunori
Ito. 879K |
|
 |
|
  |
