36.06Mb (1256 downloads)
FSX/P3D v3, v4 Messerschmitt 109 DISLU The Messerschmitt Bf 109 V13 and V14 were racing prototypes utilizing the new Daimler-Benz DB 601 engine for the first time in a Bf 109. Me 109 V14 was prepared for Ernst Udet to be flown at the 4th International Aviation Meeting near Zürich Switzerland between 23 July and 1 August 1937. After flying the airplane to Zürich himself, Udet flew the aircraft in the Alps Circuit Race on 27 July, experienced engine trouble, and crash-landed the plane. He was not hurt but the aircraft was a write-off, ending a very brief, and no doubt embarrassing, public debut . FSX/P3D v3 & 4 mdl by A.F.Scrub.
Posted Sep 29, 2019 06:38 by A.F.Scrub
18.81Mb (215 downloads)
This is a repaint of the DC-3 in Aero Virgin Islands colors. The freeware DC-3 (C-47) by Manfred Jahn is needed for this repaint. Aero Virgin Islands began operations in the spring of 1977. The fleet was basically all DC-3s. Their route network consisted of flights to St. Thomas, and Saint Croix in the U.S. Virgin Islands, and San Juan, in Puerto Rico. They went out of business in September 1989. This is a repaint of N28346, which was destroyed in that Hurricane. Textures are 32bit DDS. This repaint was tested on P3D v3. It should also work on FSX & FSX-SE.
Required files:
required file
Posted Sep 26, 2019 23:54 by Ted Giana
39.98Mb (2067 downloads)
FSX/P3D v3,v4 Messerschmitt 109B-D
Without a doubt, the Messerschmitt Bf 109 was Germany's most important, and most numerous, fighter of World War II. With more than 30,000 of all variants produced, it is easily the most numerous of any fighter type of the war. First flown in 1935 as the Bf 109a, this arch-enemy of Great Britain was fitted with, of all things, a Rolls-Royce engine. It did not meet with instantaneous enthusiasm from pilots used to open cockpits, two wings, and great low-speed agility such as the biplanes of World War I. The Bf 109B was the first version of this famous fighter to enter mass production. FSX/P3D v3,v4 mdl by A.F.Scrub.
Posted Sep 21, 2019 04:46 by A.F.Scrub
9.87Mb (1118 downloads)
This is an update for FSX of the Blackburn
Firebrand by A.F.Scrub. I have updated the
flight dynamics; changed the internal fuel to
what at least one web site said it should be
(total gallons); changed both panels by
adding gauges to them; fixed the fuel
selector gauge; it was not made correct, or
the one with the aircraft was messed up;
remarked out the oxygen gauge that was
causing the strobe lights to not work; and
added a different autopilot. You can use the
one with the radios, or the new one. For me
the gun effects did not work. Apparently
something is missing, or messed up some way.
Posted Sep 9, 2019 13:32 by Bob Chicilo
42.78Mb (174 downloads)
FSX/P3D Derby Airways DC-3 textures for Manfred Jahn and team C-47 v3.12.
Derby Airways textures by Gary Harper.
Required files:
required file
Posted Sep 5, 2019 08:34 by Gary Harper
29.49Mb (1472 downloads)
This is an update for FSX of the F-86H Sabre
by A.F.Scrub. I added a hud and a nav/GPS
switch to the 2D panel and resized the GPS.
The hud could not be placed correct on the
VC. I updated the flight dynamics and added
a centre tank to the aircraft.cfg file. This
is the whole aircraft.
Posted Sep 3, 2019 12:03 by Bob Chicilo
34.54Mb (175 downloads)
FSX Standard Airways DC-3 textures for Manfred Jahn and team C-47 v3.12.
Standard Airways textures by Gary Harper.
Required files:
required file
Posted Aug 31, 2019 09:58 by Gary Harper
22.44Mb (130 downloads)
This is a repaint of the DC-3 in Zambia Airways colors. The freeware DC-3 (C-47) by Manfred Jahn is needed for this repaint. Zambia Airways acquired 3 DC-3s from Central African Airways, and another one from East African Airways. This particular repaint depicts DC-3 VP-YKH, which was a Central African Airways registration. It eventually got a Zambian registration - 9J-RFX. It was with the carrier from 1964 to 1974, when it was retired. Textures are 32bit dds. This repaint was tested on P3D v3, and should work on FSX, FSX-SE and P3D4.
Required files:
required file
Posted Aug 21, 2019 23:50 by Ted Giana
42.89Mb (2000 downloads)
P3D/FSX T-6G Texan Factory fresh livery pack.
Includes two depictions of factory fresh AT-6F Texans, one destined for the USAAF, the other for Russia. Both are based off of North American Aviation publicity photos, illustrating the lend-lease nature of production; one batch going to the USAAF, the next, identical batch, going to the Soviet Union. .
Please note that Fuel selector and magneto switch must be set in order to start engine.
3D model by David Eckert and Warwick Carter. Pilot 3D model by Michael Flahault. Added the superb textures by John Terell. (details included). Please zip preview for larger images.
more information included.
Packaged and tesed in P3D4 (and should work in FSX) by Chris Evans
Posted Aug 19, 2019 04:35 by chris evans
11.41Mb (778 downloads)
FSX/FS2004/Acceleration/P3dV3 Blohm & Voss P185 Concept Bomber. This German German WWII aircraft was never built but the concept should replace the Ju-87 "Stuka" and was also proposed as ground attack aircraft with a 75 mm tankkiller canon or two MK103 guns in a belly pod. My package provides a "what if" aircraft in five variants and four paint schemes: A) Dive bomber with three 500 kg bombs- B) Ground attack bomber with six 250 kg bombs and gun pod- C) Tank killer with 75 mm canon and two rocket pods- D) Air defence with a twin MG131 gun turret and two rocket pods- E) Marine/Navy variant wit two 45 cm torpedos. All variations has a 2D panel and a matching VC, the turret, all bombs, torpedos or rockets are animated. Attentions: No sound included! Choose on by yourself! FSDS 3.5 model by Erwin Welker
Posted Aug 15, 2019 08:10 by Erwin Welker