CFS2 Yakovlev UT-1B RedArmy. All credits are for Ivan Goncharov and Alexander Belov, the original designers. I converted this plane for CFS2, gave it a 2D and a VC with working (Russian) gauges, a dp-file with working guns and rockets and a CFS2-compatible airfile.

1946 Northrop XB-35 Flying Wing for Flight Simulator Ten (May be compatible with P3D3-4 32-64 bit gauges) The story of the XB-35 is well known, and the details of this 200,000 lb Strategic Bomber is easily found online. Trivia: The XB-35 and the B-2 have the same wingspan of 172 ft. The FSX Flying Wing is the last Piglet Peculiar Plane, a developmental model Warchild was flying to set up the FS flight flight dynamics. This un-finished model was retained by Pam after Tim retired. Some years latter, Y.T. had a look at it, sorted out some issues, got things working and serviceable. And stuff sat for a few more years. It has a static, which needs(Scrubby? Erwin?} further disassembly and development. I did get a panel in, using Davids XB-35 gauges and cfg, with Manfred's C-97G Turbocharger and smoke gauges, DSD squeaky brakes, and the sound file - R4360's! Door 0 - crew hatch tailhook - bomb doors Full exterior animations for cooling system, slats. Model by Tim 'Piglet' Conrad Flight model: Pam "WarChild" Brooker Trouble shooting, digi-AME, VC bodge, finalize cfg, fix exterior ect, -Yours Truly- Dec24 2023 Merry Christmas

Turkish Airlines TC-JNH (RR Engine) and TC-JOA (GE Engine) Textures for the Thomas Ruth A330-300 model. This texture is a part of my project to attempt to re-texture the Thomas Ruth A330s with 4096*4096 HD Textures. Special thanks to Oniel Black for helping with the slats textures. Feel free to join the JetRepaintsSG group on Facebook for more of my repaint works! Installation instructions have been included in the file. Made by Muhammad Akmal Farhan, Requires the full model to be installed.

FSX/P3D Boeing-787-10 UsAir. Fictitious livery. UsAir never operated the 787. TDS model. The VC is the Erik Bender great adaption of the X-plane Mariano Gonzalez (MagKnight)'s 787 VC.

T'way Air (HL8500) Texture for the Thomas Ruth A330-300 model. This texture is a part of my project to attempt to re-texture the Thomas Ruth A330s with 4096*4096 HD Textures. Special thanks to Oniel Black for helping with the slats textures. Feel free to join the JetRepaintsSG group on Facebook for more of my repaint works! Installation instructions have been included in the file. Made by Muhammad Akmal Farhan, Requires the full model to be installed.

Reupload of Cerasim MH-60 US Navy SAR pack. Corrected colors and additional liveries. Total of 21 aircraft repaints in this pack. You will need the Cerasim UH60L payware for these to work.

UK2000 Norwich XTREME 2023 Texture Upgrade. Norwich XTREME was released by UK2000 in 2017. In the past 6 years, Norwich International has seen a few changes, while UK2000 has stopped creating FSX scenery updates. This texture update reflects Norwich's changes in the same resolution or higher. The changes are as follows: Flybe Aircraft and signs have been swapped for alternatives, The Air France ATR has been swapped for a Blue Islands ATR, The Bond helicopter hangars have been replaced with Bristow and Air Ambulance hangars, the Premier Flight Training portacabin has an updated logo, the Park & Ride building has been converted to Norwich Aviation Centre, The parked 737 at the end of the closed runway has been changed from Jet2 to Tui, and the PA28s in the General Aviation Parking have been replaced with G-BSSC and G-SEJW (Owned by Norwich Aviation Centre). These modifications should make the scenery more accurate. All texture modifications are by dbob . To install, just drag the contents of each texture folder to its corresponding texture folder in the location that your UK2000 Norwich and Common scenery are installed in. This is an Upgrade for the Payware UK2000 Norwich XTREME scenery package for FSX, not a standalone scenery package. This may work in the FS2004 and P3D versions of the product too.

FSX/P3D Airbus A320NEO Swiss package. Switzerland's flag carrier airline is based at Zurich Airport and flies globally. Currently Swiss operate 6 A320neo with a further 11 on order. Model by Project Airbus with NEO engine mod by Bret Herman. Updated VC by Speedbird77 with built in FMC by Garret Smith. Includes A320 operation manual and checklist. CFM NEO sounds included. Textured, assembled for P3D v5.4 by Chris Evans. Should work in FSX and other P3D

sky and sun texture pack Navids 2016. It generates a soft and relaxed sky ideal for combining with cloud and sun textures. Unfortunately the 2017 version is NOT online. All credit goes to its creator and owner Navid Hashemi.

This is a P3Dv4+ conversion of the Vista Liners 737-300. It was brought up to P3Dv4+ standards by Eagle Rotorcraft's George Arana and was in turn modified further by myself to create the 737-3H4(WL) that Coulson uses for their Fireliner platforms. I had also added some different texture mapping for the belly on certain models to allow for better mapping of textures there as well as the addition of the RADS XXL/2 doors to the belly of the aircraft. The Fireliners currently serve in North America, Australia, and soon will also serve South America. The package includes 5 liveries; Former T-139 is included despite being lost in Australia in February of 2023 with no casualties luckily. North American operated T-137 and it's Australian government contract markings for summer of 2023. Also included is B-210 in New South Wales Rural Fire Service livery. Completing the package will be newly converted T-22 that will serve the government of Argentina. The Fireliners are capable of carrying 4,000 USG of fire retardant or water, or over 15,100 Liters. This is the whole aircraft and is only compatible with P3Dv4+. P3Dv4+ Conversion by George Arana of Eagle Rotorcraft, Coulson Fireliner Conversion by: Nicholas Mitchell "Scorch00."