Messerschmitt Bf109G-10/U4 WNF built by Design Team Daedalus Unit: 11./JG52 Deutsch Brod May 1945 Pilot: Unknown The Bf109G-10 was an attempt by the RLM to standardize the Bf109 sub-types using the new DB 605D engine fitted with MW-50 (methanol water 50/50 mix) boost giving an increase to 1775hp. However this attempt was a massive failure and there is no "standard" Bf 109G-10. The only consistent features were the use of the "Erla Haube" canopy and a version of the DB 605D engine requiring a streamlined cowling to cover the larger engine configuration. The Erla factory used a completely different engine cowling type with the port side featuring a rectangular fairing behind the engine and an ellipse shape on the starboard side. The WNF and Regensburg plants used an ellipse shape on both sides and had small chin bulges. Regensburg production seems to have been mostly conversions of existing G6 and G-14 airframes. Most used larger main wheels which required the larger rectangular shaped upper wing fairings, but some used the smaller wheels with the smaller teardrop shaped upper wing fairings. While all had the tall horizontal tail type, they used different rudder types. Different types of oil coolers, tail wheel struts, antenna masts, etc. from subcontractors were available at different times during the production runs. Armament was different too. The WNF built G-10s were the G-10/U4 subtype using a 30mm cannon in the nose rather than the 20mm used in the Erla and Regensburg built models. Given the many different features that existed on individual G-10 aircraft, each model we have created has its own unique features. Pstrany began the development of the models using Paul Rebuffat's Messerschmitt model - with permission - as a starting framework and updated the shape, and added a plethora of details, new parts, and ideas. Pstrany also developed the models for the drop tanks, weapons and racks. Captain Kurt created paints for each, the 2D instrument panel, the .dp files, the air files and the aircraft.cfg files. Mav SCASM edited each model so that they have animated wing slats, drop tanks, and other features, as well as optimizing models for the best possible frame rates. Mav also developed the idea for the 2d panel to be offset for the Revi gun sight to match the CFS2 reticle.

Messerschmitt Bf109G-10/U4 WNF built by Design Team Daedalus Unit: Unknown - abandoned Prien, Germany 1945 Pilot: Unknown The Bf109G-10 was an attempt by the RLM to standardize the Bf109 sub-types using the new DB 605D engine fitted with MW-50 (methanol water 50/50 mix) boost giving an increase to 1775hp. However this attempt was a massive failure and there is no "standard" Bf 109G-10. The only consistent features were the use of the "Erla Haube" canopy and a version of the DB 605D engine requiring a streamlined cowling to cover the larger engine configuration. The Erla factory used a completely different engine cowling type with the port side featuring a rectangular fairing behind the engine and an ellipse shape on the starboard side. The WNF and Regensburg plants used an ellipse shape on both sides and had small chin bulges. Regensburg production seems to have been mostly conversions of existing G6 and G-14 airframes. Most used larger main wheels which required the larger rectangular shaped upper wing fairings, but some used the smaller wheels with the smaller teardrop shaped upper wing fairings. While all had the tall horizontal tail type, they used different rudder types. Different types of oil coolers, tail wheel struts, antenna masts, etc. from subcontractors were available at different times during the production runs. Armament was different too. The WNF built G-10s were the G-10/U4 subtype using a 30mm cannon in the nose rather than the 20mm used in the Erla and Regensburg built models. Given the many different features that existed on individual G-10 aircraft, each model we have created has its own unique features. Pstrany began the development of the models using Paul Rebuffat's Messerschmitt model - with permission - as a starting framework and updated the shape, and added a plethora of details, new parts, and ideas. Pstrany also developed the models for the drop tanks, weapons and racks. Captain Kurt created paints for each, the 2D instrument panel, the .dp files, the air files and the aircraft.cfg files. Mav SCASM edited each model so that they have animated wing slats, drop tanks, and other features, as well as optimizing models for the best possible frame rates. Mav also developed the idea for the 2d panel to be offset for the Revi gun sight to match the CFS2 reticle.

Messerschmitt Bf109G-10 Erla built by Design Team Daedalus Unit: 2./JG300 Borkheide, Germany early 1945 Pilot: Uffz. Hans Dahmen The Bf109G-10 was an attempt by the RLM to standardize the Bf109 sub-types using the new DB 605D engine fitted with MW-50 (methanol water 50/50 mix) boost giving an increase to 1775hp. However this attempt was a massive failure and there is no "standard" Bf 109G-10. The only consistent features were the use of the "Erla Haube" canopy and a version of the DB 605D engine requiring a streamlined cowling to cover the larger engine configuration. The Erla factory used a completely different engine cowling type with the port side featuring a rectangular fairing behind the engine and an ellipse shape on the starboard side. The WNF and Regensburg plants used an ellipse shape on both sides and had small chin bulges. Regensburg production seems to have been mostly conversions of existing G6 and G-14 airframes. Most used larger main wheels which required the larger rectangular shaped upper wing fairings, but some used the smaller wheels with the smaller teardrop shaped upper wing fairings. While all had the tall horizontal tail type, they used different rudder types. Different types of oil coolers, tail wheel struts, antenna masts, etc. from subcontractors were available at different times during the production runs. Armament was different too. Most WNF built G-10s were the G-10/U4 subtype using a 30mm cannon in the nose rather than the 20mm used in the Erla and Regensburg built models. Given the many different features that existed on individual G-10 aircraft, each model we have created has its own unique features. Pstrany began the development of the models using Paul Rebuffat's Messerschmitt model - with permission - as a starting framework and updated the shape, and added a plethora of details, new parts, and ideas. Pstrany also developed the models for the drop tanks, weapons and racks. Captain Kurt created paints for each, the 2D instrument panel, the .dp files, the air files and the aircraft.cfg files. Mav SCASM edited each model so that they have animated wing slats, drop tanks, and other features, as well as optimizing models for the best possible frame rates. Mav also developed the idea for the 2d panel to be offset for the Revi gun sight to match the CFS2 reticle.

Messerschmitt Bf109G-10 Erla built by Design Team Daedalus Unit: 5./JG11 - surrendered at Rechlin-Lärz, Germany May 7, 1945 Pilot: Unknown The Bf109G-10 was an attempt by the RLM to standardize the Bf109 sub-types using the new DB 605D engine fitted with MW-50 (methanol water 50/50 mix) boost giving an increase to 1775hp. However this attempt was a massive failure and there is no "standard" Bf 109G-10. The only consistent features were the use of the "Erla Haube" canopy and a version of the DB 605D engine requiring a streamlined cowling to cover the larger engine configuration. The Erla factory used a completely different engine cowling type with the port side featuring a rectangular fairing behind the engine and an ellipse shape on the starboard side. The WNF and Regensburg plants used an ellipse shape on both sides and had small chin bulges. Regensburg production seems to have been mostly conversions of existing G6 and G-14 airframes. Most used larger main wheels which required the larger rectangular shaped upper wing fairings, but some used the smaller wheels with the smaller teardrop shaped upper wing fairings. While all had the tall horizontal tail type, they used different rudder types. Different types of oil coolers, tail wheel struts, antenna masts, etc. from subcontractors were available at different times during the production runs. Armament was different too. Most WNF built G-10s were the G-10/U4 subtype using a 30mm cannon in the nose rather than the 20mm used in the Erla and Regensburg built models. Given the many different features that existed on individual G-10 aircraft, each model we have created has its own unique features. Pstrany began the development of the models using Paul Rebuffat's Messerschmitt model - with permission - as a starting framework and updated the shape, and added a plethora of details, new parts, and ideas. Pstrany also developed the models for the drop tanks, weapons and racks. Captain Kurt created paints for each, the 2D instrument panel, the .dp files, the air files and the aircraft.cfg files. Mav SCASM edited each model so that they have animated wing slats, drop tanks, and other features, as well as optimizing models for the best possible frame rates. Mav also developed the idea for the 2d panel to be offset for the Revi gun sight to match the CFS2 reticle.

Messerschmitt Bf109G-10 Erla built by Design Team Daedalus Unit: 9./JG51 Fels am Wagram, Germany (Austria) May 1945 Pilot: Unknown The Bf109G-10 was an attempt by the RLM to standardize the Bf109 sub-types using the new DB 605D engine fitted with MW-50 (methanol water 50/50 mix) boost giving an increase to 1775hp. However this attempt was a massive failure and there is no "standard" Bf 109G-10. The only consistent features were the use of the "Erla Haube" canopy and a version of the DB 605D engine requiring a streamlined cowling to cover the larger engine configuration. The Erla factory used a completely different engine cowling type with the port side featuring a rectangular fairing behind the engine and an ellipse shape on the starboard side. The WNF and Regensburg plants used an ellipse shape on both sides and had small chin bulges. Regensburg production seems to have been mostly conversions of existing G6 and G-14 airframes. Most used larger main wheels which required the larger rectangular shaped upper wing fairings, but some used the smaller wheels with the smaller teardrop shaped upper wing fairings. While all had the tall horizontal tail type, they used different rudder types. Different types of oil coolers, tail wheel struts, antenna masts, etc. from subcontractors were available at different times during the production runs. Armament was different too. Most WNF built G-10s were the G-10/U4 subtype using a 30mm cannon in the nose rather than the 20mm used in the Erla and Regensburg built models. Given the many different features that existed on individual G-10 aircraft, each model we have created has its own unique features. Pstrany began the development of the models using Paul Rebuffat's Messerschmitt model - with permission - as a starting framework and updated the shape, and added a plethora of details, new parts, and ideas. Pstrany also developed the models for the drop tanks, weapons and racks. Captain Kurt created paints for each, the 2D instrument panel, the .dp files, the air files and the aircraft.cfg files. Mav SCASM edited each model so that they have animated wing slats, drop tanks, and other features, as well as optimizing models for the best possible frame rates. Mav also developed the idea for the 2d panel to be offset for the Revi gun sight to match the CFS2 reticle.

Messerschmitt Bf109G-10 Regensburg built by Design Team Daedalus Unit: IV./JG27 - probably at Achmer, Germany Spring, 1945 Pilot: Unknown The Bf109G-10 was an attempt by the RLM to standardize the Bf109 sub-types using the new DB 605D engine fitted with MW-50 (methanol water 50/50 mix) boost giving an increase to 1775hp. However this attempt was a massive failure and there is no "standard" Bf 109G-10. The only consistent features were the use of the "Erla Haube" canopy and a version of the DB 605D engine requiring a streamlined cowling to cover the larger engine configuration. The Erla factory used a completely different engine cowling type with the port side featuring a rectangular fairing behind the engine and an ellipse shape on the starboard side. The WNF and Regensburg plants used an ellipse shape on both sides and had small chin bulges. Regensburg production seems to have been mostly conversions of existing G6 and G-14 airframes. Most used larger main wheels which required the larger rectangular shaped upper wing fairings, but some used the smaller wheels with the smaller teardrop shaped upper wing fairings. While all had the tall horizontal tail type, they used different rudder types. Different types of oil coolers, tail wheel struts, antenna masts, etc. from subcontractors were available at different times during the production runs. Armament was different too. Most WNF built G-10s were the G-10/U4 subtype using a 30mm cannon in the nose rather than the 20mm used in the Erla and Regensburg built models. Given the many different features that existed on individual G-10 aircraft, each model we have created has its own unique features. Pstrany began the development of the models using Paul Rebuffat's Messerschmitt model - with permission - as a starting framework and updated the shape, and added a plethora of details, new parts, and ideas. Pstrany also developed the models for the drop tanks, weapons and racks. Captain Kurt created paints for each, the 2D instrument panel, the .dp files, the air files and the aircraft.cfg files. Mav SCASM edited each model so that they have animated wing slats, drop tanks, and other features, as well as optimizing models for the best possible frame rates. Mav also developed the idea for the 2d panel to be offset for the Revi gun sight to match the CFS2 reticle.

This is the FW 190A-4 Trop. It was in full production mid 1942. The variant had 4 20mm cannons in limited numbers and 2 Mg 17's. The BMW 801 D-2 made 1700 HP with Methanol-Water injection it was boosted to 2100 HP. The 190A-4 could do 517 Kph full throttle with MW50 at Sea Level. It climbs at 2800 feet per minute. The aircraft comes with weapons which are according to researched configurations. The A-4 actually had 12 aircraft that carried torpedoes!! The model itself does not have a tailhook but I programmed one in aircraft.cfg so you can fly carrier missions. There is also GPS and autopilot.

There is a previous conversion of the JR (João Ricardo) Lucariny Ho-18AB made by me in 2005. The airfile (one of my earliest work) is a Boeing 737 adaptation and is far from being a realistic affair. We learn a lot in 20 years (and I became a realism freak) and I never stop researching about planes. I found the real Horten Ho-18 was a relatively light and small aircraft, so I did a new airfile from zero in 2020. Since then, I am flying it but only recently I decided to cross the Atlantic with it. After that I remember that exist a Horten Ho-18C model made by Christian Drawz I decided to include it in the package. The models were converted using Ivan Hsu/Allen’s DOSMdlc 2.0. Uncle TGT created a bitmap that turns the crew of the Ho-18C more human. Both panels 2D bitmaps are mine using the Lucariny one as a basis. Weapons are Ground Crew and Luft 46’ creations. I WOULD LOVE TO KNOW WHO ARE THE GAUGES AUTHORS.

This pack includes nine aircraft. The Gloster F.9/37, also known as the Gloster G.39, was a British twin-engined design from the Gloster Aircraft Company for a cannon-armed heavy fighter to serve with the Royal Air Force, planned before the Second World War. It was rejected in favour of the Westland Whirlwind, but it was a delight to fly. The project was resurrect when the Air Ministry launched the Specification F.18/40, for a specialist night fighter, with four 20 mm cannons at the nose and four Browning .303 mounted in a Boulton Paul turret. Gloster redesign the fuselage and used the F.9/37 wings fitted with two Rolls-Royce Merlin engines. The project included an Airborne Interception (AI) radar and was so promising that received support from the Air Staff who saw it as superior to the Bristol Beaufighter and the Air Ministry ordered one prototype that was not built. Someone at the Air Staff saw that the turret would compromised the performance and emitted a new Air Ministry Specification, the F.29/40, with eight .303 Browning machine guns installed in a tray bellow the fuselage firing ahead supplementing the four 20 mm Hispano Suiza cannons. The project, known unofficially as the Gloster Reaper, evolved to a one seat heavy fighter configuration and was dropped so that Gloster could concentrate on existing work and on the nascent British jet projects.

Andreas Becker and Steve (RATT) Robinson built two of the five designs made by Heinkel (all under the same designation) to a Luftwaffe bid for a night fighter project. The first of these advanced designs, the Heinkel P-1079A, was basically developed as a two-seated night fighter of traditional configuration. The pilot and the gunner/navigator were sitting in tandem position. The wings were swept back 35 degrees, mounted to mid-fuselage. The tail had a V-shaped rudder. The armament were three Rheinmetall-Borsig MK 108 30mm cannons in the nose and 24 R4-M 'Orkan' high explosive rockets on two racks mounted under the wings. Another feature of armament was the so-called schräge musik with four upward-firing 20 mm Mauser MG 151/20 autocannons, mounted in the back of the aircraft. Therefore, the night fighter had to approach and attack bombers from below, guided into position by commands from the navigator. The aircraft should be equipped with the new FUG 228 radar unit. This sophisticated radar would have empowered the aircraft with an almost all-weather ability. This version was converted from an Andreas Becker FS 2004 aircraft. This was the second design (Entwurf II) for the He P.1079 all-weather heavy fighter. The wings were swept back sharply and contained six fuel tanks. It was a tail less design with two He S 011 jet engines located in the wing roots fed by intakes in the wing leading edges. A crew of two sat in tandem in the cockpit and armament was to be four MK 108 30mm cannon. This version was converted from a Steve (RATT) Robinson FS 2002.