FSX/P3D Airbus A321NEO (A321-251NX) Thai package. Thailand's flag carrier airline currently operates 1 A321NEO with 31 on order. Model by Project Airbus with NEO engine mod by Bret Herman. Updated VC by Speedbird77 with built in FMC by Garret Smith. Includes A320 operation manual and checklist. PW sounds included. Textured, assembled for P3D v5.4 by Chris Evans. Should work in FSX and other P3D

FMA IA 58 PUCARÁ B. This model is designed for FSX with Service pack 2 or Acceleration. Also works in P3D. Features: Fully VC 3D gauges. VC sound: switch, knob, lever, wiper. Full native model with bump and specular mapping. 5 paint schemes included.

Built in 1939, MSN 94067 was initially registered as G-AFNN for Hull Aero Club. Exported to Australia for use by the Royal Australian Air Force, it became VH-ACR in 1940. The RAAF took the aircraft on charge in November 1941 and it became A21-42. Civilianized in 1945, it reverted to being VH-ACR, but after the Certificate of Airworthiness ran out in 1947, it became a museum exhibit. Purchased as a restoration project in June 2003, it became VH-CZB, and had its first post restoration flight on 28th August 2008. It remains an amazing piece of restoration work and a credit to its owners in Euroa, Victoria. Painted onto Frank Elton’s DH.94 Moth Minor model, I have shown VH-CZB in its post restoration colours as A21-42. Enjoy.

FSX/P3D Boeing 737 Max 8 Korean Air Package. Korea's flag carrier airline currently operates 7 Boeing 737 max8 with 11 more on order. The high spec Boeing 737-Max 8 from TDS. The VC is the Microsoft/Alejandro Rojas Lucena/FSND base modified by Speedbird77 to resemble a Max cockpit, including gauges by G. Munro. There are custom CFM eco sounds included for that extra realism. Use - Instrument panel - Util for ground vehicles, doors stairs, fuel truck, buses. New Utility allows Bus, fuel, doors and more. (Go to Views - Instrument panel - Utility). VC added and edited to allow correct VC views, correct jetways and wheel levels. Credits go to TDS fantastic native FSX Boeing Max8 model. I added PDF B737 checklist. Textured, packaged and prepared for FSX & P3D up to v5 by Chris Evans.

FSX/FS2004/Acceleration Motorcycle BMW 900 Cafe Racer. This beautyful weight reduced road racer has a 2-cylinder boxer engine. The airfiles let you enjoy the driving on straight roads in high speed. But curvy roads are a real challenge. The model can be parked without driver (using Wingfold). When driving you can control the roll angle with the joystick. FSX cameras provide beautyful views including close view to the famous engine. The model comes with 2D-panel and VC. FSDS 3.5 model by Erwin Welker

FSX/P3D Boeing 747-8i Lufthansa 1500th 747 package. With 8 aircraft in operation, Lufthansa is the largest operator of the Boeing 747-8i and this D-ABYP livery celebrates the the 1,500th Boeing 747 built. Assembled for FSX with the enhanced VC from FSND. Project Opensky FSX Native Boeing 747-800 model with the upgraded Boeing 747 internal cockpit (VC) from Alejandro Rojas Lucenda. Model includes ground cargo servicing, stairs. Also includes the Boeing 747 VC textures upgrade. This give a much clearer 747 interior virtual cockpit look. Zip preview for larger pictures. Textured and assembled for P3Dv5 by Chris Evans. Should also work in FSX and previous P3D editions.

Transall D77 was built in 1970 for the Luftwaffe and carried 50+55 as an identity. Replaced by the larger Airbus A400M, D77 was sold to an Australian company who wanted to turn it, and two others, into aerial firefighters. D77 became VH-TIT on 14th September 2022 and was delivered to Townsville Airport in November 2023. Fitted with a 14,000 litre internal tank, it will be operated by the McDermott Aviation Group in an aerial firefighting role. Painted onto the Capt I.D’Attomo/Capt G. Quai German Transall, I have added a water drop facility from AirFxEz. Enjoy.

MSN 532 was built in 1997 and was allocated tail number N532GA for Gulfstream Aerospace. Its second owner re-registered it as N282Q in September 1998 and it stayed as that, until the fifth owner re-registered it as N282QA in December 2002. It became N740SS in May 2003 and acquired this amazing colour scheme in 2025. Painted on to the Peter Brun/Lider Designs Gulfstream G V model, this shows N740SS as seen in late 2025.

FSX/P3D Embraer EMB 120ER 'Uber' fictional package. Just for fun, this aircraft is painted in Uber theme. Originally designed by Erick Cantu, now available as FSX and P3D native. This release has some fixes, added a new soundpack. FSX/P3D native conversion by George Arana, Brandon Filer. Sounds by Adam Murphy. Panel/Gauges by Microsoft. Textures by Chris Evans

This update to the A. F. Scrub (Scrubby) RAF PRXI aircraft is intended, with approval, to make the 2D and VC panels appear more in accordance with the World War II PILOT’S NOTES PN 1565 for SPITFIRE IX, XI & XVI and indeed, to instruct on how to operate within the intent of those Notes. THIS UPDATE, AS PER THE ORIGINAL, IS NOT SUITABLE FOR P3D BEYOND V3 The update includes the 2 x 66 IPG wing tanks that were not included in the original upload. No provision is made for adding blister or drop tanks to further increase range. The Recon flight to the Ruhr Dams in 1943 is almost the limit without additional tanks being added. The project involved substitution of gauges, writing xml files to update gauges that did not function. Adding existing Lancaster gauges by Plane Design (previous approval over 13 years ago), xml help from Jeff Lind in Sydney to achieve the intent and gauges by Rob Barendregt for taxi and braking, RMcL and Jeff Lind for AWPT/Fuel, Wolfgang Piper for the analogue wind gauge plus Flight Time by P Wallaert. The original bmp for the 2D panel is worked over to remove the gun sight. For scenery viewing enthusiasts there is no better way to view your scenery as it passes under this aircraft at 30000ft. This will certainly be a new experience for all would be pilots. Refer to Page 8 of the pdf for installation details.