Ibiza city and surrounding areas based on Goole Maps photogrammerty. Check map of included area in screenshots. Installation Unzip both files on community folder. Use 7-zip if you have problems unzipping. Notes This scenery uses a lot of RAM. If you have less than 32GB you may need to increse your page file and make sure it is placed on an SSD drive for better performance. Credits Jonahex111 (Goolge Earth Decoder) thalixte (Optimization tool for Google Earth Decoder) Google Maps

Ibiza city and surrounding areas based on Goole Maps photogrammerty. Check map of included area in screenshots. Installation Unzip both files on community folder. Use 7-zip if you have problems unzipping. Notes This scenery uses a lot of RAM. If you have less than 32GB you may need to increse your page file and make sure it is placed on an SSD drive for better performance. Credits Jonahex111 (Goolge Earth Decoder) thalixte (Optimization tool for Google Earth Decoder) Google Maps

MSFS2020 Bombardier CRJ-700 converted from the default FSX CRJ700. Uses the VC from the MSFS CJ4. Freeware CRJ-700 Mod working cockpit is migrate mod from FSX. under copyright rules: https://www.xbox.com/en-US/developers/rules Mod using Cj4 panel (working cockpit) Model from microsoft FSX version to MSFS: LDX and Douglas Cardoso working on: engines, lights, systems. The cockpit window issue will be resolved in the next update. LDX aircraft mod for MSFS

MSFS Geneva, Switzerland. Geneva is the second-most populous city in Switzerland (after Zürich) and the most populous city of Romandy, the French-speaking part of Switzerland. Situated where the Rhone exits Lake Geneva, it is the capital of the Republic and Canton of Geneva. The municipality (ville de Geneve) has a population (as of December 2019) of 203,951, and the canton (essentially the city and its inner-ring suburbs) has 504,128 residents. In 2014, the compact agglomeration du Grand Geneve had 946,000 inhabitants in 212 communities in both Switzerland and France. Within Swiss territory, the commuter area named "Metropole lemanique" contains a population of 1.26 million. This area is essentially spread east from Geneva towards the Riviera area (Vevey, Montreux) and north-east towards Yverdon-les-Bains, in the neighbouring canton of Vaud. This scenery has been extracted from Google Maps, hence all 3D credits goes to Google. This scenery has been generated with the Google Earth Decoder tool (credits to /u/Jonahex111): https://www.reddit.com/r/FS2020Creation/comments/j3faaj/google_earth_decoder_now_userfriendly/. Version 2.3 by Thalixte

The DR400-180 Régent is a modification of the standard DR400 cadet of Asobo. The model/frame is the same but very similar to the original Regent of 1979. The performance, weight & balance, tank capacity, the outside livery, the cockpit textures and a few instruments were modified. It's a standalone aircraft and doesn't change the standard DR400 Cadet in Asobo. Current Version 1.4.1 by Tydirium85

Included: USS Arizona Memorial (Removed 11/24/20 due to the official US scenery update) USS Missouri memorial / battleship USS Bowfin submarine museum A large number of docked navy ships A few submarines with cranes Some small tug boats The red and white striped control tower on Ford Island Since you all seem to like stadiums, I included Aloha Stadium Lots of lights for beautiful reflections on the water at night/dusk/dawn To view, set your departure airport to Ford Island naval auxiliary landing field (PHNP) or depart from Honolulu (PHNL). Current Version 1.4 by Projectionist

MSFS Lynden Pindling Intl. Airport, Nassau. Airport scenery for MYNN adapted from FSX scenery uploaded in 2016 and current for that time. Installation: Place the mynn-lynden-pindling-intl package in your MSFS community folder. By Art Poole

Paris is the capital and most populous city of France, with an estimated population of 2,148,271 residents as of 2020, in an area of 105 square kilometres (41 square miles). Since the 17th century, Paris has been one of Europe's major centres of finance, diplomacy, commerce, fashion, science and arts. The City of Paris is the centre and seat of government of the Île-de-France, or Paris Region, which has an estimated official 2020 population of 12,278,210, or about 18 percent of the population of France.The Paris Region had a GDP of €709 billion ($808 billion) in 2017. According to the Economist Intelligence Unit Worldwide Cost of Living Survey in 2018, Paris was the second most expensive city in the world, after Singapore, and ahead of Zürich, Hong Kong, Oslo and Geneva. Another source ranked Paris as most expensive, on a par with Singapore and Hong Kong, in 2018. This scenery has been extracted from Google Maps, hence all 3D credits goes to Google. This scenery has been generated with the Google Earth Decoder tool. You can download the whole Package (including thalixte-paris1 to thalixte-paris5, thalixte-parisladefense and thalixte-paris-saintdenis) in this single archive:

The Global AI Ship Traffic Project provides AI ship traffic across the globe with realistic models of real life ships of all types from fishing boats to cruise ships, from tugs to tankers, container ships, and bulk carriers, from patrol boats to submarines, destroyers and aircraft carriers. More than 1300 models are placed on routes all over the world according to what is realistic for each region. More than a hundred ferry routes are covered with their specific ferries and you will find naval exercises with Navy ships from most regions. Watch a full scale NATO landing exercise on the West Coast of the Jutland Peninsula in Denmark or the Brazilian or Chinese navies doing the same in their respective areas. Watch the departure of a Tall Ship race from Saint Malo, Kiel or Sandefjord or a round the world sail race departing from Gothenburg... Go looking for Maersk Alabama in the exact spot she was attacked by pirates of the coast of Somalia as later depicted in the movie Captain Phillips with Tom Hanks. More than 24.000 ship movements ensure that the sea is no longer empty. Add to that killer whales, humpback whales, and right whales.... Models and textures by Erwin Welker, Jean-Pierre Fillion, Knud Kristoffersen, Dexter, Milton Shupe, Manfred Siedler, Bernardo Barroso, Paul Donnelly, Finn Kristoffer, Didier ‘‘Lagaffe’’ Puentes, Andrew Thomsen, Robystar, Antonio Diaz, Sebastien Viale, Alberto Garcia, Cxema, Pascal Dumat, Rick Keller, Lazarus Starkweather, Dave Garwood, Darren Lane; Henrik Nielsen, and more A great thank also to the many beta testers and a special thanks to the shipping company DFDS for providing documentation to make realistic models of their fleet of passenger and freight ferries. Idea and conceptualization Henrik Nielsen, KL791 For support and additional information please follow our threads on the project on forums.flightsimulator.com, avsim.com, fsdeveloper.com, sim-outhouse.com in English, on flightsim.no in Norwegian and Danish, on voovirtual.com in Portuguese, and pilote-virtuel.com in French. Installation is simple: unzip and drop in your Community folder. Ensure you traffic settings for Ships and Ferries is 5% or more. All ships will appear at 5% so no need to increase to 100% unless you want to see repetition of the default ships. Known Issues - please be aware this is an "advanced" conversion of the FSX/P3D models meaning the models are not native MSFS models, however file structure, textures, and many of the older model files have been modified to suit the requirements of MSFS AI traffic. However as the project contains mdl files conversion can give stutters approaching ships depending on your system and settings; on high end gaming computer this should be limited, but if you run a MSFS minimum spec computer with high graphic settings you might see FPS drops when close to the ships. Also loading time of routes depends on your computer specs. You can read more on this here: https://forums.flightsimulator.com/t/global-ai-ship-traffic-v1-for-msfs/368369/312?u=hnielsen791 Currently - March 2021 wakes are not enabled by MSFS. Nor does the models have hard decks. This will come in a subsequent update.

Flight Analyzer Utility FsQC v7.28 Flight Data Recorder - with Logbook. FOR: MSFS P3D, FSX(Steam) and FS2004 Now with improvements and more features Very easy to use, just make a flight plan in the simulator or in this utility. (But please read the readme.txt file) What this program does: quickly change the settings of MSFS2020/P3D/FSX/FS2004, such as time, date, fuel, weight, traffic etc. Start a failure sytem, such as gear, flaps, engine, etc. runway detecting system to see wich runways are in use. Quickly look at Airport Info for all possible info such as: ILS, Radio, RW length, Elevation, etc, etc. This is all fully freeware. Full manual at: www.fsqc.eu Only Limited demo for: The flight analyzing/data recording, Logbook and the PDF Flightreport. Flight analysis start recording at the moment when you begin taxiing. It gives you huge information such as: - takeoff- and landing-weight. - takeoff- and landing-roll in m. and ft. - separate fuel consumption in taxi, climb, cruise and descent. - maximum banking in flight. - which speed you using the flaps and gear. - when autopilot on or off. - vertical speed on touchdown. - reverser set after landing. - wich speed you cancel reverser. - bouncing at landing. - graphical landingchart with Touch&Go and Missed Approach. - graphical Climb-, Descent- and Full- flightchart. - and lots of more. You can better look the example of the pdf document. Requirements: Computer with Windows7 or higher and internet access.(XP also supported look in the help/manual) Flightsimulator MSFS2020, P3D, FSX(Steam), or FS2004 and FSUIPC installed. Note: requires paid activation for full use of the Flight Analyzer and Logbook. Register and you have 1 month free. Program fully works without registration at airport Athens and Iraklion (Greece). By Evander Tholen