FS2004/FSX
PA-48 Enforcer.
With new ideas of how to keep the P-51 Mustang alive in 1968
and in service, the long-standing workhorse Merlin V- 12 was
replaced with a turboprop. This mod was not funded by the USAF,
but by Cavalier. The new modification was called the Turbo Mustang
III. Later, Cavalier sold the project to Piper. The Enforcer
had little in common with the original P-51 and it was flight
tested in April 1971. The USAF, under pressure from Congress,
did order two prototype PA-48 from Piper. No other orders were
placed and the project died. The two PA- 48 Enforcers do exist
today at USAF Museums. GMAX model by A.F.Scrub. 6MB
FSX
DH-88 De Havilland Comet.
This is the FS9 Comet with added thumbnails & works fine
in FSX. The de Havilland DH.88 Comet was a twin-engined British
aircraft that won the 1934 MacRobertson Air Race, a challenge
for which it was specifically designed. It set many aviation
records during the race and afterwards as a pioneer mail plane.
Includes fully working VC (Virtual cockpit) Presented for FSX
by Danny Garnier. 13.3MB
FSX/FS2004
Dewoitine D.338 Package.
A French liner used during the thirties, mainly by Air France
on the intercontinental lines. The model in this package represents
an aircraft used by Air France in 1938 on Far East lines (from
Paris to Singapore, Bangkok, Saigon, ...), with a typical
12 seat lay-out. Full moving parts and animations (control
surfaces, gears, door, ...) + a custom 2D panel made from
a real picture (No VC). Compatible with FS2004and FSX. Designed
by Patrice Grange. 7.1MB
Dewoitine
D338 Virtual cockpit "passenger point of view" Upgrade
,
This will add a virtual cockpit made to give a "passenger
point of view" for my Dewoitine D.338. Needs to have
installed previously my Dewoitine D.338 package. For those
who want to be really "submerged" in the atmosphere
of the far-east airlines during the thirties .. by Patrice
Grange. 1.2MB
FSX/FS2004
Gloster F5/34 “Guardian” Package.
.The last of the Gloster fighter designs created by H P Folland,
the single-seat all-metal cantilever monoplane evolved to Specification
F.5/34 (which ultimately produced the Hurricane and the Spitfire)
was powered by an 840hp Mercury IX nine-cylinder radial engine
and carried an armament of eight 7.7mm Browning guns. This aircraft,
to which no designation was assigned other than that of the
specification that it was intended to meet, suffered somewhat
protracted development owing to the company's preoccupation
with the Gladiator. The first of two prototypes did not commence
flight trials until December 1937, with the second following
in March 1938. By the time that the Gloster fighter made its
debut, the Hurricane had entered service and the Spitfire had
reached production, and further development of the Mercury-engined
monoplane was not pursued. Model and textures by Bill Holker,
modified airfile and gauges from various freeware releases and
Microsoft FS, sound file downloaded from Sim Outhouse. For FSX
operation the Glass texture file needs to be converted to a
DXT3 bit map. 12.8MB
FSX/FS2004
Gloster F5/34 “Sea Guardian”Package.
Fictional FAA “Sea Guardian” model of the last
of the Gloster fighter designs created by H P Folland, the
single-seat all-metal cantilever monoplane evolved to Specification
F.5/34 (which ultimately produced the Hurricane and the Spitfire)
was powered by an 840hp Mercury IX nine-cylinder radial engine
and carried an armament of eight 7.7mm Browning guns. This
aircraft, to which no designation was assigned other than
that of the specification that it was intended to meet, suffered
somewhat protracted development owing to the company's preoccupation
with the Gladiator. The first of two prototypes did not commence
flight trials until December 1937, with the second following
in March 1938. By the time that the Gloster fighter made its
debut, the Hurricane had entered service and the Spitfire
had reached production, and further development of the Mercury-engined
monoplane was not pursued. Model and textures by Bill Holker,
modified airfile and gauges from various freeware releases
and Microsoft FS, sound file downloaded from Sim Outhouse.
For FSX operation the Glass texture file needs to be converted
to a DXT3 bit map. 12.9MB
FSX
Fairey III Package. The
prototype of the Fairey III was the N.10 floatplane built by
Fairey Aviation for the Royal Naval Air Service during the First
World War.Model: Ted Cook Features full VC Custom Sound , Nor-Cals
Prop Blur and a Custom paint by Ted.T and the Nor-Cal Prop Club.
FSX Sp2 /Xp Tested. 6MB
FSX
P-51 Mustang (Precious Metal-Air Race Model) 1987 Package:
P-51XR N6WJ Griffon engine racer created - showed at Reno '88
Crashed at Reno -named "Precious Metal" like 44-73518
Many thought N5483V was N6WJ, but just the tail section was
used. 1995: P-51XR N6WJ returned to Reno, placed 1st in Silver
Did not race for many years. This Mustang was created for Flight
Sim X w/sp2 and the acceleration expansion pack. Presented by
Bill Cook 31.5MB
FS2004/FSX
Yak-9U Fighter.
The Yak-9U was the second generation of Yak-9s. It introduced
a redesigned airframe , a new wing of increased span and area,
and the more powerful VK-107 engine with 1,230 kW (1,650 hp).
The top speed of 700 km/h (435 mph) at 5,600 m (18,370 ft) was
faster than any production fighter aircraft in the world at
that time. The Yak-9UV and Yak-9P were postwar versions. They
took part in the Korean War.Production of the Yak-9 ended in
1946 after a record 16,769 aircraft had been delivered. Complete
GMAX plane by A.F.Scrub. 6.1MB
FSX/FS2004
Douglas DC-4 and C-54 Package V2.1
This base package includes 14 colour schemes covering the period
1942-2006, including Pan American, USAAF, SAS, Loftleidir, Buffalo
Airways and many others. Version 2.1 model for FSX (including
SP2) and FS2004, with improved flight dynamics, more accurate
panel and virtual cockpit. Model by Jens B. Kristensen, Flight
Dynamics by FSAviator. 36.5MB Filename: DC4_V21.zip
FSX/FS2004
Douglas DC-4 and C-54 freighters Textures only.
USAAF C-54D, India 1945, and Avianca DC-4 (ex. C-54B) in 1970's
colors. Works with FSX, including SP2, and FS2004. Updated version,
requires DC4_V21.zip.(above) By Jens B. Kristensen. 6.5MB
