FSX/P3D Boeing 747-400F Sky Gates Cargo package. SkyGates is a Russian cargo airline based at Moscow Zhukovsky International Airport. As of April 2020, Sky Gates operate 2 Boeing 747-400F. Project Opensky Boeing 747-400f FSX native model with the much improved Boeing 747 internal model (VC) from Alejandro Rojas Lucenda (Manual included). Model includes ground cargo servicing, stairs (FSX - Go to Views - Instrument Panel -Posky Utility. P3D go to Vehicle - Instrument Panel -). Added 747 sounds, edited views, panel. Thank you to Project Opensky/Skyspirit/TDS for their huge contribution to the worldwide community of flight simulation. Also includes the Boeing 747 VC textures upgrade. This give a much clearer 747 interior virtual cockpit look. Zip preview for larger pictures. Added wing views. Added the high quality textures by Sky sim Graphics. Assembled and tested in P3D v4.5 by Chris Evans. Should also work in FSX and previous P3D versions. Zip preview for images.

FSX/P3D Airbus A340-600 South African Airways Star Alliance package. South Africa's flag carrier airline is based at O. R. Tambo International Airport, Johannesburg and currently has 4 A340-600 in it's fleet, flying worldwide. Model by Thomas Ruth. Added the better Thomas Ruth modified VC with latest updates by Chris Evans and Louis Quintero. Added correct jetway configs, wing views and wheel levels. Manual included. Zip preview for larger pictures. Checklist by Werner Schott included. Textured and assembled for P3D v4.5 by Chris Evans. Should work in FSX and earlier P3D versions.

This is a high definition repaint pack for the FSN wheeled version of the AT-802. The AT-802 SEAT or Single Engine Air Tankers have been used widely across the world. Mainly in North America and Australia. The AT-802 is capable of operating on dirt strips and remote refill locations due to it's small size and ability to work from rough strips. This capability is widely used in Australia. The AT-802 is used widely in the US as a contracted initial attack aircraft for the USFS. But it is largly overshadowed by the large contracted air tankers the USFS uses. It's 2 competitors in North America are mainly the the Bombardier/Viking CL-415/215T Super Scooper and the Grumman/Marsh S-2F3AT Turbo Tracker flown by Cal Fire. The S-2 and CL-415s both carry more than 1,000 gallons. Making the AT-802's 800 gallon capacity the smallest of the category. It is also slower than it's twin engine competitors. Still a viable platform, used in pairs in tandem to add to the effectiveness of drops similar to the use of the CL-415, the 802s can also be used as lead / air attack platforms. More powerful versions of the AT-802 variants are currently being flight tested. The new derivative, the AT-1002 is larger and more powerful 802 was first flight tested in late 2013. It is still in development, but will be capable of carrying 1,000 gallons of retardant/water and carry nearly twice the fuel of the 802s currently. Making the 1002 closer in performance to the other aircraft in it's category. This repaint pack represents 8 liveries for several operators in the United States, Canada, and Australia. Repaints by Nicholas Mitchell.

Polish Air Force textures for the payware Iris F15 Eagle. By Voiteh.

The Updated Magnetic Variation data package provides an updated set of Magdec.bgl files (2020) for FS9, FSX and P3D. New values have been calculated according to the exact WMM2020 mathematical model at epox 1/1/2020. Replacing the default magdec.bgl file with the one provided will result in a better fit between displayed headings and current data. Install instructions are included. by Herve Sors

FSX/P3D Boeing 757-200 Royal Flight package. Royal Flight is a Russian charter airline based at Moscow Sheremetyevo airport and provides seasonal charter flights to popular holiday destinations. Royal Flight currently have 5 Boeing 757-200 in their fleet. The FSX Native Boeing 757-200 model from TDS includes ground servicing and more. The VC is the Alejandro Rojas Lucena/FSND upgraded Boeing 737-800 VC cockpit brown tinted to be more like the 757, plus a 2d 757/767 panel by Philipe Wallaert (press F10). This VC model includes Working wipers (right mouse click on switch) with rain effect. Switches for LCD Screens, EICAS, PFD, MFT. Autobrake switch. Opening pilots window. Cabin Lights switch. Realistic FMC. Ground Proximity Warning System (GPWS) and additional G1000 MFD and PFD screens, More Realistic night VC textures. There are custom Boeing 757 sounds included for that extra realism. Edited views, wheel levels. Added wing views. Checklist included. See VC docs to get the best out of the VC and FMC. Textured and assembled for P3D & FSX by Chris Evans.

This package contains a FS-X native conversion of all my original Piaggio P-166 models developed for FS-2002/2004. All versions are included: P-166A, P-166BL-2, P-166CL-2, P-166M, P-166S, P-166DL-3 and P-166DP-1. The 3D models are virtually the same, so these are fairly simple models. Yet they come with a VC (no 2D panel this time!). With respect to the FS-2002/2004 releases, they come with very much improved panels, in two flavors: Piston and Turboprop. Gauges developed by Milton Shupe & Scott Thomas for the Aero Commander / Turbo Commander Aircraft series, and Edgar Guinart López of Aeroproyecto for the Embraer 110. Other Gauges from my own Piaggio P-180 & PD-808. Also Included is a brand-new flight model redeveloped from scratch. The 3D models are mildly improved, with a proper pilot figure, main panel backlighting and bump-mapping. Please refer to the Reference and Checklist pages provided via the FS Kneeboard for flying and operating instructions. Models converted with Arno Gerretsen’s Model Converter X. The Piaggio P-166 is a light small twin. An Exotic twin-engine prop that sold all over the world including America, UK, and Australia. Its origin is traced Back to the Piaggio P-136, a light amphibian, which the P-166 keeps the wings, the engines and the tail planes. The first P-166A flew in November 1957. The aircraft was still in production in the early 21st century in an improved turboprop version, the P-166DP-1.

This is a panel update for the Saunders Roe SR-53, designed and posted by Hubert Mueller. It's a great model but definitely deserves better panels. So here is a panel update including all the required gauges as well as automatic exhaust and afterburner effects. As the designer didn't include an E-mail address I couldn't ask his permission but I trust he won't mind me posting the entire package without it - it's always easier for users to get a whole package instead of having to install bits and pieces into an existing package. So this is the whole aircraft. I didn't change anything in the aircraft's look, just the panels and added effects. Thanks to Hubert Mueller for his nice model. Panel update and effects by Michael Pook.

. Portugal's flag carrier airline is based at Lisbon Airport and currently has 7 Airbus A330-200 in it's fleet and flies to destinations in Europe, North and South America as well as Africa. Added Garmin G1000 MFD and PFD popups and added FSX Garmin G1000 user maual. Added the better Thomas Ruth VC with updates by Louis Quintero and Chris Evans. Use FMC under Views/Instrument panel in FSX menu. (FSX : Go to Views -Instrument Panel. P3D: Go to Vehicle - Instrument panel). Added better views. Added the great textures by Mario Monfrecola. Assembled and tested in P3Dv4.5 and should be ok in FSX and earlier P3D versions by Chris Evans.

This is an extensive model conversion and custom model modification for the stock P3D LM/CS C-130J. The ScorchMod C-130Js came about as a response to the LM/CS models lacking current versions of the C-130J in active service with the US Armed Forces. This modification is for P3DV4+, this will not work in earlier versions of P3D or FSX. This is a true AC-130J Ghostrider, it is not just a combined model with the the stock AC-130. This model is the 3rd iteration of the "ScorchMod" C-130Js. This model has the correct 2 cannon set up, the GAU-23 30mm cannon at the front and the M102 105mm Howitzer at the rear. I have also included 2 model variations a clean version and a loaded version. The clean version has open wing station hardpoints and the loaded version has the true compliment of GBU-39 Small Diameter Bombs that were modeled from scratch. I have also included the Ghostrider's assortment of FLIR cameras and additional communication domes. This model also has previous ScorchMod modifications done to it. Such as night lighting for the formation "slime" lights and other model changes. I have also coded a usable FLIR pod in the belly to mimic the iconic Hercules Gunship view of the target area. The camera is stock with P3D and uses P3D's camera function controls to allow the user to slave and track targets on the ground. The weapon systems though remain inoperable for P3D. I have included 4 custom repaints for the AFSOC liveries for the USAF, 3 with nose art and 1 without. I have also included a glowing propeller tip mod as an optional night lighting option. The real C-130Js do not have these glowing propeller tips (like the MV-22B Osprey) but thought it was an interesting modification for those that want it. This is a component based mod, so you will have to build the aircraft's folder up for the mod to work on your sim. Instructions are included. Model conversion, modification, and repaints by Nicholas "Scorch" Mitchell.