Messerschmitt Bf 109E-7 by Design Team Daedalus Unit: III./JG5 Petsamo, Finland 1942 Pilot: Hptm. Gunther Scholz Following the E-4, the E-7 was the next major production variant, entering service and seeing combat at the end of August 1940. One of the limitations of the earlier Bf 109Es was their short range of 660 km (410 mi) and limited endurance, as the design was originally conceived as a short-range interceptor. The E-7 rectified this problem as it was the first Bf 109 subtype to be able to carry a drop tank, usually the standardized Luftwaffe 300 L (79 US gal) capacity unit mounted on a centre-line rack under the fuselage, which increased its range to 1,325 km (820 mi). Fuel from the drop tank was pumped to the internal fuel tank via a large fuel line that ran up and along the inside starboard wall of the cockpit, with a clear sight glass located in the fuel line's main span so the pilot could easily see the flow of fuel and know when the tank was empty. Alternatively, a bomb could be fitted and the E-7 could be used as a Jabo fighter-bomber. Previous Emil subtypes were progressively retrofitted with the necessary fittings for carrying a drop tank from October 1940. Early E-7s were fitted with the 1,100 PS DB 601A or 1,175 PS DB 601Aa engine, while late-production ones received 1,175 PS DB 601N engines with improved altitude performance the latter was designated as E-7/N. A total of 438 E-7s of all variants were built. There were many small differences between individual E-7s because the E-7 was often modified in the field by groundcrew and rear area repair depots. The production standard had no pilot armor. Mods included types of pilot head armor, armored windscreen, tropical sand filters, etc. So each model we have created has its own unique features. This aircraft was modified with a flat plate with curved top pilot head armor and an armored glass windscreen. Pstrany is the primary model author with some small model refinement and additions by Captain Kurt as the model was collaborated on during development. Captain Kurt created the textures for each, the 2D instrument panel, the individual .dp files, air files and aircraft.cfg files.

Messerschmitt Bf 109E-7 by Design Team Daedalus Unit: 7./JG26 Gela, Sicily 1941 Pilot: Oblt. Joachim Muncheberg Following the E-4, the E-7 was the next major production variant, entering service and seeing combat at the end of August 1940. One of the limitations of the earlier Bf 109Es was their short range of 660 km (410 mi) and limited endurance, as the design was originally conceived as a short-range interceptor. The E-7 rectified this problem as it was the first Bf 109 subtype to be able to carry a drop tank, usually the standardized Luftwaffe 300 L (79 US gal) capacity unit mounted on a centre-line rack under the fuselage, which increased its range to 1,325 km (820 mi). Fuel from the drop tank was pumped to the internal fuel tank via a large fuel line that ran up and along the inside starboard wall of the cockpit, with a clear sight glass located in the fuel line's main span so the pilot could easily see the flow of fuel and know when the tank was empty. Alternatively, a bomb could be fitted and the E-7 could be used as a Jabo fighter-bomber. Previous Emil subtypes were progressively retrofitted with the necessary fittings for carrying a drop tank from October 1940. Early E-7s were fitted with the 1,100 PS DB 601A or 1,175 PS DB 601Aa engine, while late-production ones received 1,175 PS DB 601N engines with improved altitude performance the latter was designated as E-7/N. A total of 438 E-7s of all variants were built. There were many small differences between individual E-7s because the E-7 was often modified in the field by groundcrew and rear area repair depots. The production standard had no pilot armor. Mods included types of pilot head armor, armored windscreen, tropical sand filters, etc. So each model we have created has its own unique features. This aircraft was modified with flat plate pilot head armor and had a command pennant atached to the antenna mast. Pstrany is the primary model author with some small model refinement and additions by Captain Kurt as the model was collaborated on during development. Captain Kurt created the textures for each, the 2D instrument panel, the individual .dp files, air files and aircraft.cfg files.

Messerschmitt Bf 109T-2 by Design Team Daedalus Unit: JGr. Drontheim, Trondheim-Vaernes, Norway Summer 1941 Pilot: unknown The Bf 109T was based on the E-7 and designed as an aircraft carrier fighter intended to serve on Germany's then under construction carrier, the Graf Zeppelin. The wing span was increased to 36 feet, 4.22 inches, a small spoiler was added to the top of the wings, and added an arrestor hook and catapult fittings. An order for 70 was placed with Fieseler with construction fully underway in April 1941. When construction of the Graf Zeppelin was cancelled, the remaining 63 of 70 T-1s were built as T-2s with the carrier equipment either removed, or inactivated like the wing top spoilers. Some of the T-1s may have been converted to T-2 standard. It was found that the flight performance of the T-2 was closely comparable to the E-4/N. Because of its ability to take off and land in shorter distances, 42 T-2s were assigned to I/JG.77 and 21 T-2s were assigned to Jagdgruppe Drondheim in June 1941, both units being deployed in Norway on landing strips which were both short and subject to frequent, powerful cross-winds. In April and May 1943 a few remaining T-2s were operational with 12 assigned to Jagdstaffel Helgoland (subordinated to JG 11) and 10 were with JG300 as night fighters. a few others were scattered around with training units. With a production run of only 70 units the planes were fairly standardized, but field modifications did exist on some planes. So each model we have created has its own unique features. This aircraft was equipped with a flat plate plus curved top pilot head armor and had an add-on armored glass windscreen. Pstrany is the primary model author with small model refinements and additions by Captain Kurt as the model was collaborated on during development. Captain Kurt created the textures for each, the 2D instrument panel, the individual .dp files, air files and aircraft.cfg files.

Messerschmitt Bf 109T-2 by Design Team Daedalus Unit: 3./JG77 Herdla, Norway 1941 Pilot: Lt Alfred Jakobi The Bf 109T was based on the E-7 and designed as an aircraft carrier fighter intended to serve on Germany's then under construction carrier, the Graf Zeppelin. The wing span was increased to 36 feet, 4.22 inches, a small spoiler was added to the top of the wings, and added an arrestor hook and catapult fittings. An order for 70 was placed with Fieseler with construction fully underway in April 1941. When construction of the Graf Zeppelin was cancelled, the remaining 63 of 70 T-1s were built as T-2s with the carrier equipment either removed, or inactivated like the wing top spoilers. Some of the T-1s may have been converted to T-2 standard. It was found that the flight performance of the T-2 was closely comparable to the E-4/N. Because of its ability to take off and land in shorter distances, 42 T-2s were assigned to I/JG.77 and 21 T-2s were assigned to Jagdgruppe Drondheim in June 1941, both units being deployed in Norway on landing strips which were both short and subject to frequent, powerful cross-winds. In April and May 1943 a few remaining T-2s were operational with 12 assigned to Jagdstaffel Helgoland (subordinated to JG 11) and 10 were with JG300 as night fighters. a few others were scattered around with training units. With a production run of only 70 units the planes were fairly standardized, but field modifications did exist on some planes. So each model we have created has its own unique features. This aircraft was not equipped with any pilot head armor and had a FuG25 raio set installed at one point. Pstrany is the primary model author with small model refinements and additions by Captain Kurt as the model was collaborated on during development. Captain Kurt created the textures for each, the 2D instrument panel, the individual .dp files, air files and aircraft.cfg files.

Messerschmitt Bf 109T-2 by Design Team Daedalus Unit: 2./JG77 Lister, Norway 1941 Pilot: unknown The Bf 109T was based on the E-7 and designed as an aircraft carrier fighter intended to serve on Germany's then under construction carrier, the Graf Zeppelin. The wing span was increased to 36 feet, 4.22 inches, a small spoiler was added to the top of the wings, and added an arrestor hook and catapult fittings. An order for 70 was placed with Fieseler with construction fully underway in April 1941. When construction of the Graf Zeppelin was cancelled, the remaining 63 of 70 T-1s were built as T-2s with the carrier equipment either removed, or inactivated like the wing top spoilers. Some of the T-1s may have been converted to T-2 standard. It was found that the flight performance of the T-2 was closely comparable to the E-4/N. Because of its ability to take off and land in shorter distances, 42 T-2s were assigned to I/JG.77 and 21 T-2s were assigned to Jagdgruppe Drondheim in June 1941, both units being deployed in Norway on landing strips which were both short and subject to frequent, powerful cross-winds. In April and May 1943 a few remaining T-2s were operational with 12 assigned to Jagdstaffel Helgoland (subordinated to JG 11) and 10 were with JG300 as night fighters. a few others were scattered around with training units. With a production run of only 70 units the planes were fairly standardized, but field modifications did exist on some planes. So each model we have created has its own unique features. This aircraft was equipped with a flat plate plus curved top pilot head armor. Pstrany is the primary model author with small model refinements and additions by Captain Kurt as the model was collaborated on during development. Captain Kurt created the textures for each, the 2D instrument panel, the individual .dp files, air files and aircraft.cfg files.

Messerschmitt Bf 190K-4 unit: II./JG52 pilot: unknown The Bf 109 Kurfürst was evolved from the Bf 109G-10. The K series was a response to the fact that the bewildering array of series, models, modification kits and factory conversions for the various Bf 109G versions led to logistic problems, making production and maintenance complicated and costly - something Germany could ill-afford late in the war. As such, the RLM (German Aviation Ministry) ordered Messerschmitt to rationalize production of the Bf 109, consolidating parts, types etc to produce a uniform, standard model with better interchangeability of parts and equipment.The "Kurfürst" version was the last and most powerful series of the Bf 109, with only the Bf 109 K-4 being built in large large numbers. Important features of the "Kurfürst" were the DB 605 DM engine, which was powered by the DB 603's large supercharger. The armament was the MK 108 cannon firing through the propeller hub and a pair of MG 131 machine guns in the upper cowling. The main landing gear had small gear doors covering the retracted wheels fitted in addition to main gear doors, and the tail wheel was also fully retractable with covering doors. Larger wheels measuring 660x190 on 13" rims were used so that the machine could carry the higher flying weight. The retracted larger wheels required rectangular bulges on the wing tops to clear the wheels. The antenna mast was mostly no longer used at the factory to reduce air resistance and make parachuting safer for the pilot. The DF antenna of the FuG 16 ZY on the back of the fuselage was moved further back to fuselage part 3. The radio access cover, which was previously always in fuselage part 5, was moved forward to fuselage part 4 because of modified installations. As with other BF 109 versions, there were were variations between individual planes due to dispersed manufacturing and parts shortages forced by Allied bombing. This aircraft had the small main gear doors removed, a fuselage mounted antenna wire, and retractable tail wheel gear. ------------------------------------------------------------------------------------------------------------------------------- Pstrany and Captain Kurt developed the models using Paul Rebuffat's Messerschmitt model - with permission - as a starting framework and updated the shape, and added a plethora of details, new parts, and ideas. Pstrany also developed the models for the drop tanks, weapons and racks. Captain Kurt created paints for each, the 2D instrument panel, the individual .dp files, the air files and the aircraft.cfg files. Mav developed the idea for the 2d panel to be offset for the Revi gunsight to match the CFS2 reticle.

Messerschmitt Bf 190K-4 unit: 12./JG27 pilot: unknown The Bf 109 Kurfürst was evolved from the Bf 109G-10. The K series was a response to the fact that the bewildering array of series, models, modification kits and factory conversions for the various Bf 109G versions led to logistic problems, making production and maintenance complicated and costly - something Germany could ill-afford late in the war. As such, the RLM (German Aviation Ministry) ordered Messerschmitt to rationalize production of the Bf 109, consolidating parts, types etc to produce a uniform, standard model with better interchangeability of parts and equipment.The "Kurfürst" version was the last and most powerful series of the Bf 109, with only the Bf 109 K-4 being built in large large numbers. Important features of the "Kurfürst" were the DB 605 DM engine, which was powered by the DB 603's large supercharger. The armament was the MK 108 cannon firing through the propeller hub and a pair of MG 131 machine guns in the upper cowling. The main landing gear had small gear doors covering the retracted wheels fitted in addition to main gear doors, and the tail wheel was also fully retractable with covering doors. Larger wheels measuring 660x190 on 13" rims were used so that the machine could carry the higher flying weight. The retracted larger wheels required rectangular bulges on the wing tops to clear the wheels. The antenna mast was mostly no longer used at the factory to reduce air resistance and make parachuting safer for the pilot. The DF antenna of the FuG 16 ZY on the back of the fuselage was moved further back to fuselage part 3. The radio access cover, which was previously always in fuselage part 5, was moved forward to fuselage part 4 because of modified installations. As with other BF 109 versions, there were were variations between individual planes due to dispersed manufacturing and parts shortages forced by Allied bombing. This aircraft had the small main gear doors removed, a fuselage mounted antenna wire, and a fixed tail wheel gear. ------------------------------------------------------------------------------------------------------------------------------- Pstrany and Captain Kurt developed the models using Paul Rebuffat's Messerschmitt model - with permission - as a starting framework and updated the shape, and added a plethora of details, new parts, and ideas. Pstrany also developed the models for the drop tanks, weapons and racks. Captain Kurt created paints for each, the 2D instrument panel, the individual .dp files, the air files and the aircraft.cfg files. Mav developed the idea for the 2d panel to be offset for the Revi gunsight to match the CFS2 reticle.

Messerschmitt Bf 190K-4 unit: 11./JG3 pilot: unknown The Bf 109 Kurfürst was evolved from the Bf 109G-10. The K series was a response to the fact that the bewildering array of series, models, modification kits and factory conversions for the various Bf 109G versions led to logistic problems, making production and maintenance complicated and costly - something Germany could ill-afford late in the war. As such, the RLM (German Aviation Ministry) ordered Messerschmitt to rationalise production of the Bf 109, consolidating parts, types etc to produce a uniform, standard model with better interchangeability of parts and equipment.The "Kurfürst" version was the last and most powerful series of the Bf 109, with only the Bf 109 K-4 being built in large large numbers. Important features of the "Kurfürst" were the DB 605 DM engine, which was powered by the DB 603's large supercharger. The armament was the MK 108 cannon firing through the propeller hub and a pair of MG 131 machine guns in the upper cowling. The main landing gear had small gear doors covering the retracted wheels fitted in addition to main gear doors, and the tail wheel was also fully retractable with covering doors. Larger wheels measuring 660x190 on 13" rims were used so that the machine could carry the higher flying weight. The retracted larger wheels required rectangular bulges on the wing tops to clear the wheels. The antenna mast was mostly no longer used at the factory to reduce air resistance and make parachuting safer for the pilot. The DF antenna of the FuG 16 ZY on the back of the fuselage was moved further back to fuselage part 3. The radio access cover, which was previously always in fuselage part 5, was moved forward to fuselage part 4 because of modified installations. As with other BF 109 versions, there were were variations between individual planes due to dispersed manufacturing and parts shortages forced by Allied bombing. This aircraft had the small main gear doors, a fuselage mounted antenna wire, and a fixed tail wheel gear. ------------------------------------------------------------------------------------------------------------------------------- Pstrany and Captain Kurt developed the models using Paul Rebuffat's Messerschmitt model - with permission - as a starting framework and updated the shape, and added a plethora of details, new parts, and ideas. Pstrany also developed the models for the drop tanks, weapons and racks. Captain Kurt created paints for each, the 2D instrument panel, the individual .dp files, the air files and the aircraft.cfg files. Mav developed the idea for the 2d panel to be offset for the Revi gunsight to match the CFS2 reticle.

Messerschmitt Bf 190K-4 unit: 9./JG77 pilot: Uffz. Heinrich Munniger The Bf 109 Kurfürst was evolved from the Bf 109G-10. The K series was a response to the fact that the bewildering array of series, models, modification kits and factory conversions for the various Bf 109G versions led to logistic problems, making production and maintenance complicated and costly - something Germany could ill-afford late in the war. As such, the RLM (German Aviation Ministry) ordered Messerschmitt to rationalize production of the Bf 109, consolidating parts, types etc to produce a uniform, standard model with better interchangeability of parts and equipment.The "Kurfürst" version was the last and most powerful series of the Bf 109, with only the Bf 109 K-4 being built in large large numbers. Important features of the "Kurfürst" were the DB 605 DM engine, which was powered by the DB 603's large supercharger. The armament was the MK 108 cannon firing through the propeller hub and a pair of MG 131 machine guns in the upper cowling. The main landing gear had small gear doors covering the retracted wheels fitted in addition to main gear doors, and the tail wheel was also fully retractable with covering doors. Larger wheels measuring 660x190 on 13" rims were used so that the machine could carry the higher flying weight. The retracted larger wheels required rectangular bulges on the wing tops to clear the wheels. The antenna mast was mostly no longer used at the factory to reduce air resistance and make parachuting safer for the pilot. The DF antenna of the FuG 16 ZY on the back of the fuselage was moved further back to fuselage part 3. The radio access cover, which was previously always in fuselage part 5, was moved forward to fuselage part 4 because of modified installations. As with other BF 109 versions, there were were variations between individual planes due to dispersed manufacturing and parts shortages forced by Allied bombing. This aircraft had the small main gear doors removed, a fuselage mounted antenna mast, and a fixed tail wheel gear. ------------------------------------------------------------------------------------------------------------------------------- Pstrany and Captain Kurt developed the models using Paul Rebuffat's Messerschmitt model - with permission - as a starting framework and updated the shape, and added a plethora of details, new parts, and ideas. Pstrany also developed the models for the drop tanks, weapons and racks. Captain Kurt created paints for each, the 2D instrument panel, the individual .dp files, the air files and the aircraft.cfg files. Mav developed the idea for the 2d panel to be offset for the Revi gunsight to match the CFS2 reticle.

Messerschmitt Bf 190K-4 unit: 7./JG4 pilot: unknown The Bf 109 Kurfürst was evolved from the Bf 109G-10. The K series was a response to the fact that the bewildering array of series, models, modification kits and factory conversions for the various Bf 109G versions led to logistic problems, making production and maintenance complicated and costly - something Germany could ill-afford late in the war. As such, the RLM (German Aviation Ministry) ordered Messerschmitt to rationalize production of the Bf 109, consolidating parts, types etc to produce a uniform, standard model with better interchangeability of parts and equipment.The "Kurfürst" version was the last and most powerful series of the Bf 109, with only the Bf 109 K-4 being built in large large numbers. Important features of the "Kurfürst" were the DB 605 DM engine, which was powered by the DB 603's large supercharger. The armament was the MK 108 cannon firing through the propeller hub and a pair of MG 131 machine guns in the upper cowling. The main landing gear had small gear doors covering the retracted wheels fitted in addition to main gear doors, and the tail wheel was also fully retractable with covering doors. Larger wheels measuring 660x190 on 13" rims were used so that the machine could carry the higher flying weight. The retracted larger wheels required rectangular bulges on the wing tops to clear the wheels. The antenna mast was mostly no longer used at the factory to reduce air resistance and make parachuting safer for the pilot. The DF antenna of the FuG 16 ZY on the back of the fuselage was moved further back to fuselage part 3. The radio access cover, which was previously always in fuselage part 5, was moved forward to fuselage part 4 because of modified installations. As with other BF 109 versions, there were were variations between individual planes due to dispersed manufacturing and parts shortages forced by Allied bombing. This aircraft had the small main gear doors, a fuselage mounted antenna wire, and retractable tail wheel gear. ------------------------------------------------------------------------------------------------------------------------------- Pstrany and Captain Kurt developed the models using Paul Rebuffat's Messerschmitt model - with permission - as a starting framework and updated the shape, and added a plethora of details, new parts, and ideas. Pstrany also developed the models for the drop tanks, weapons and racks. Captain Kurt created paints for each, the 2D instrument panel, the individual .dp files, the air files and the aircraft.cfg files. Mav developed the idea for the 2d panel to be offset for the Revi gunsight to match the CFS2 reticle.