welcome to my Nemeth Designs AS332 Super Puma Los Angeles Sheriff Department paint pack. 4 paints are included, all work with FSX and P3D. N950SG, N950LE, N951LB, N952JH. You will need the Nemeth Designs AS332 payware for these paints to work. Enjoy!

FSX/P3D Boeing 737-Max 9 Air Tanzania package. Tanzania's flag carrier airline is based in Dar es Salaam and currently operates 2 Boeing 737 Max 9 flying to destinations around Africa, Europe, Asia and the Middle East. The high spec Boeing 737-9 Max from TDS. The VC is the Microsoft/Alejandro Rojas Lucena/FSND base modified by Speedbird77 to resemble a Max cockpit, including gauges by G. Munro. There are custom CFM eco sounds included for that extra realism. Use - Instrument panel - Util for ground vehicles, doors stairs, fuel truck, buses. New Utility allows Bus, fuel, doors and more. (Go to Views - Instrument panel - Utility). VC added and edited to allow correct VC views, correct jetways and wheel levels. Credits go to high quality TDS FSX native Boeing Max 9 model and paint kit. I added PDF Boeing 737 checklist. Textured, packaged and prepared for FSX & P3D up to v5.3 by Chris Evans.

MSN 1849 was built in 2018 and test flown as F-WWYE and subsequently as B-005E, before delivery to Tianjin Airlines as B-302D in August 2018. In November 2024, B-302D was transferred to Hong Kong Airlines as B-LHP, remaining with them at this time. Painted on to Thomas Ruth’s excellent A330-300 model, this repaint shows B-302D as delivered to Tianjin Airlines.

FSX/P3D Boeing 737 Max 8 Norwegian Air Sweden Package. Based at Stockholm Arlanda Airport, Norwegian Air Sweden is a Swedish low cost airline and a division of Norwegian Air Shuttle. Currently, Norwegian Air Shuttle have 29 Boeing 737 Max8 in operation. The high spec Boeing 737-Max 8 from TDS. The VC is the Microsoft/Alejandro Rojas Lucena/FSND base modified by Speedbird77 to resemble a Max cockpit, including gauges by G. Munro. There are custom CFM eco sounds included for that extra realism. Use - Instrument panel - Util for ground vehicles, doors stairs, fuel truck, buses. New Utility allows Bus, fuel, doors and more. (Go to Views - Instrument panel - Utility). VC added and edited to allow correct VC views, correct jetways and wheel levels. Credits go to TDS fantastic native FSX Boeing Max8 model. I added PDF B737 checklist. Textured, packaged and prepared for FSX & P3D up to v5 by Chris Evans.

FSX/P3D Boeing 777-300ER Cathay Pacific Oneworld package. Hong Kong based Cathay Pacific currently operates 35 Boeing 777-300ER aircraft, flying globally. Updated with new VC and more. Realistic CFM soundpack added. Original VC by Jacob Kubique. Converted to FSX native by Zachary777. VC updates by Speedbird77 with gauges by G. Munro and Ken Wiggington. See Credits for more. Textured and assembled for P3d v5 by Chris Evans. Should also work in FSX and previous P3D.

FSX/P3D Airbus A380 Lufthansa "100 Years" Textures. High quality repaint of the PA A380-800 D-AIMH. Textures only, requires the full Project Airbus A380 model. Repaint by Markus Uhrmann. (This now includes the aircraft.cfg text to add.)

**This is NOT the Bell 212 and is NOT a duplicate upload!** Many thanks to the community that took part in this project and to CeraSim for allowing this project to takeoff! Similar to the Bell 212 expansion pack, this pack goes even farther into the expansion of firefighting and rescue options for the Bell 412 helicopter from CeraSim. This model expansion pack adds 13 additional model configurations to choose from. Numerous things were added to it including a complete overhaul externally for the addition of 4k textures, PBR, fire/rescue equipment loadouts, working rescue hoists, FLIR cameras, deployable snorkels, exterior lighting, new rotor droop and animation setup, As well as a complete set of custom liveries to represent operators that operate the platforms seen in these configurations. This is a component based expansion package. Meaning, it requires the original CeraSim Bell 412 product in order to allow these expansion models to work in your sim. As you have to use original files from it, to complete the install. Just like the Bell 212 expansion pack and others I have completed. This was done to protect their overall product. This does not include the entire aircraft. Like the 212, the changes were subtle and were made to work with most of these aircraft's stock paint mapping, so older repaints can be added to these new models as well as making new ones with your provided CeraSim paintkit that came with the original aircraft. Operator liveries included in this expansion pack are as follows: Wildcat Helicopters (Canadian & Australian operation liveries, Los Angeles County Fire, San Bernardino County Sheriff, Ventura County Sheriff, San Diego Fire Dept, San Diego County Sheriff, Orange County Fire Authority, New South Wales Rural Fire Service, Kestrel Aviation, and FAASA (Spain). This addon is specifically for P3Dv4 or newer versions of Prepar3d, it is NOT compatible with FSX.Original aircraft by Cera Simcraft, model additions/modifications by Nicholas Mitchell "Scorch00", repaints by Nicholas Mitchell "Scorch00" and SATO Community Member "Delta."

This is an update for the aircraft config file for the deHavilland DHC-6 C-FOPI that I just uploaded to re-position the virtual cockpit. Add this to the model file and replace file when asked, that is all there is to it.

Firstly, much appreciation to CeraSim for allowing me to make these modifications to their product and to the community for helping in feedback, testing, and livery creation projects for this release. This is an expansion pack that adds up to 11 additional external model configurations flown in firefighting and rescue operations across the world for the CeraSim Bell 212 helicopter. Models include high and low skid models, firefighting equipment, updated 4k textures, PBR, external lighting additions, working stowable pond snorkels, working FLIR and Rescue Hoist. Some models also have further modifications representing other smaller equipment additions like speakers, mirrors, bubble windows, and the addition of the BLR FastFin modification. This is a component based addon, meaning you are required to already own the CeraSim Bell 212 product in order for these expansion models to be installed and work in your sim. This pack does NOT include the entire aircraft. Only external models and associated files for the updated models. Meaning you have to have the payware product to essentially complete these files in order for them to work. This was done to protect the vase CeraSim Product. Operators included in this pack are as follows: Kestrel Aviation, HeliLog Chile, Kachina Helicopters, Mustang Helicopters, Rogers Helicopters, San Diego Fire Department, San Bernardino County Sheriff, Ventura County Sheriff, Wildcat Helicopters, and Valhalla Helicopters. This Mod is compatible in P3DV4 or newer versions of Prepar3d ONLY, it is NOT compatible in FSX. Original model by CeraSim, Aircraft model updates/additions by Nicholas Mitchell, "Scorch00" and repaints by Nicholas Mitchell "Scorch00" and SATO Community Member "Delta."

FSX/P3D Boeing 747-8i Luthansa 100 Years D-ABYN package. Germany's flag carrier airline Lufthansa currently operate 18 Boeing 747-8i, the largest operator of the Boeing 747-8i. The Boeing 747-8 Intercontinental can carry over 400 passengers at a speed of 1055km/h or 570 knots (656mph). Skyspirit FSX Native Boeing 747-8i assembled and upgraded for Prepar3D 3 & 4 + FSX with the developed B747 VC (virtual 3d cockpit) from Microsoft with enhancements by Alejandro Rojas Lucenda (Manual included). This is the Skyspirit FSX native Boeing 747-8i model, and includes ground cargo servicing, stairs (FSX - Go to Views - Instrument Panel -Posky Utility), opening nose section and more. Included CF engine sounds from BrandonG, with realistic jet whine to make your flight sound great. Thank you to Skyspirit/Project Opensky for their outstanding donations to the worldwide community of flight simulation. Also includes the Boeing 747 VC textures upgrade. Painted, assembled and tested in P3D v5 by Chris Evans. Should also work in FSX and earlier P3D versions.