The Albatros D.III (OAW) The Albatros D.III was a development of the Albatros D.II. Having investigated the construction of captured Nieuport fighters, Albatros engineers designed the lower wing of the D.III narrower and shorter than the upper, supported by V-shaped struts. The Mercedes 6 cylinder engine was increased to 180hp from 160hp. Wing tips became swept, that helped to avoid wings vibration. The aileron control rods were drawn through the lower wing, and the radiator was displaced from the fuselage side to the middle of the upper wing. Weight reduction was one of the main objectives at that time. Test flights began in August – September of 1916, and in December 1916 the plane was delivered to fighter squadrons. Several months of combat flights revealed that plane could lose its lower wing in a steep dive or in a sharp turn. Water from radiator, placed on the upper wing, poured out onto the machineguns making firing impossible. After this, radiator was placed to the right side of the pilot. By June 1917 Albatros started using new Daimler’s cellular radiator that helped to solve problem with engine overheating. The plane was manufactured in Albatros Werke and Ostdeutsche Albatros Werke (OAW) factories. The OAW version is principally identified by the use of a rounded rudder, which later became standard on the later D.V series. In total 1346 copies of Albatros D.III were built. --------------------------------------------------------------------------------------------------------------- The model, textures. panel and air files are by Captain Kurt. The pilot figures were developed from Wolfi's freeware Japanese pilot .fsc source file. The prop spinning texture is by Kelticheart. Gauges are by Martin Klein with texture change outs by Captain Kurt

The Albatros D.III was a development of the Albatros D.II. Having investigated the construction of captured Nieuport fighters, Albatros engineers designed the lower wing of the D.III narrower and shorter than the upper, supported by V-shaped struts. The Mercedes 6 cylinder engine was increased to 180hp from 160hp. Wing tips became swept, that helped to avoid wings vibration. The aileron control rods were drawn through the lower wing, and the radiator was displaced from the fuselage side to the middle of the upper wing. Weight reduction was one of the main objectives at that time. Test flights began in August – September of 1916, and in December 1916 the plane was delivered to fighter squadrons. Several months of combat flights revealed that plane could lose its lower wing in a steep dive or in a sharp turn. Water from radiator, placed on the upper wing, poured out onto the machineguns making firing impossible. After this, radiator was placed to the right side of the pilot. By June 1917 Albatros started using new Daimler’s cellular radiator that helped to solve problem with engine overheating. The plane was manufactured in Albatros Werke and Ostdeutsche Albatros Werke (OAW) factories. The OAW version is principally identified by the use of a rounded rudder, which later became standard on the later D.V series. In total 1346 copies of Albatros D.III were built. --------------------------------------------------------------------------------------------------------------- The model, textures. panel and air files are by Captain Kurt. The pilot figures were developed from Wolfi's freeware Japanese pilot .fsc source file. The prop spinning texture is by Kelticheart. Gauges are by Martin Klein with texture change outs by Captain Kurt

Messerschmitt Bf 109E-1/B by Design Team Daedalus Unit: 9./JG 27 May, 1941 Gela, Sicily Pilot: Unknown To improve on the performance afforded by the 690 hp Jumo 210 of the earlier Bf 109 versions, the larger, longer 1080 hp Daimler-Benz DB 601A engine was used. As a consequence, the nose, cooling system, and wings had to be redesigned resulting in the classic Bf 109E series. In late 1938, the Bf 109E entered production. It entered general service with the Lufwaffe in the spring of 1939. A total of 1,183 E-1 were built, 110 of them were E-1/B fighter bomber versions. The E-1/B was a small batch of E-1s that became the first operational Bf 109 fighter bomber, or Jagdbomber (usually abbreviated to Jabo). These were fitted with an ETC 500 bomb rack, carrying one 250 kg (550 lb) bomb. There were many small differences between indivual E-1s because the E-1 was often modified in the field by groundcrew and rear area repair depots. The production standard was lightly armed with two 7.92mm MG17s above the engine and two in the wings and had no pilot armor. Mods included types of pilot head armor,E-4 type squared canopies, E-7 type pointed spinners, etc. So each model we have created has its own unique features. This aircraft was modified with pilot head armor flate plate plus curved top, a capped nose spinner, and had a rear view mirrow fitted to the top of the front windscreen Pstrany is the primary model author with some small model refinement and additions by Captain Kurt as the model was collaborated on during development. Captain Kurt created the textures for each, the 2D instrument panel, the individual .dp files, air files and aircraft.cfg files.

Messerschmitt Bf 109E-1/B by Design Team Daedalus Unit: II/LG 2 November 30, 1940 Crash landed at Worth Matravers, Dorset, England Pilot: Uffz. Paul Wacker To improve on the performance afforded by the 690 hp Jumo 210 of the earlier Bf 109 versions, the larger, longer 1080 hp Daimler-Benz DB 601A engine was used. As a consequence, the nose, cooling system, and wings had to be redesigned resulting in the classic Bf 109E series. In late 1938, the Bf 109E entered production. It entered general service with the Lufwaffe in the spring of 1939. A total of 1,183 E-1 were built, 110 of them were E-1/B fighter bomber versions. The E-1/B was a small batch of E-1s that became the first operational Bf 109 fighter bomber, or Jagdbomber (usually abbreviated to Jabo). These were fitted with an ETC 500 bomb rack, carrying one 250 kg (550 lb) bomb. There were many small differences between indivual E-1s because the E-1 was often modified in the field by groundcrew and rear area repair depots. The production standard was lightly armed with two 7.92mm MG17s above the engine and two in the wings and had no pilot armor. Mods included types of pilot head armor,E-4 type squared canopies, E-7 type pointed spinners, etc. So each model we have created has its own unique features. This aircraft was modified with an E-4 squared canopy, a flat plate pilot head armor and an antenna mounted pennant. Pstrany is the primary model author with some small model refinement and additions by Captain Kurt as the model was collaborated on during development. Captain Kurt created the textures for each, the 2D instrument panel, the individual .dp files, air files and aircraft.cfg files.

Messerschmitt Bf 109E-1 by Design Team Daedalus Unit: 9./JG 77 May, 1941 Crash landed at Malaoi, Peloponnese, Greece Pilot: Unknown To improve on the performance afforded by the 690 hp Jumo 210 of the earlier Bf 109 versions, the larger, longer 1080 hp Daimler-Benz DB 601A engine was used. As a consequence, the nose, cooling system, and wings had to be redesigned resulting in the classic Bf 109 series. In late 1938, the Bf 109E entered production. It entered general service with the Luftwaffe in the spring of 1939. A total of 1,183 E-1 were built, 110 of them were E-1/B fighter bomber versions. There were many small differences between individual E-1s because the E-1 was often modified in the field by groundcrew and rear area repair depots. The production standard was lightly armed with two 7.92mm MG17s above the engine and two in the wings and had no pilot armor. Mods included types of pilot head armor,E-4 type squared canopies, E-7 type pointed spinners, etc., but changing the wing MG17 armament required new different wings. So each model we have created has its own unique features. This aircraft was modified with an E-4 squared type canopy, curved pilot head armor and a capped spinner. By the time the later Bf 109E-4 and Bf 109E-7 marks were equipping the Jagdgeschwaders a program was initiated to withdraw and remanufacture the surviving E-1s to either full E-4 or E-7 standard. Pstrany is the primary model author with some small model refinement and additions by Captain Kurt as the model was collaborated on during development. Captain Kurt created the textures for each, the 2D instrument panel, the individual .dp files, air files and aircraft.cfg files.

Messerschmitt Bf 109E-1 by Design Team Daedalus Unit: 9./JG26 March 24 1940 St. Inglvert France Pilot: Fw. Artur Beese To improve on the performance afforded by the 690 hp Jumo 210 of the earlier Bf 109 versions, the larger, longer 1080 hp Daimler-Benz DB 601A engine was used. As a consequence, the nose, cooling system, and wings had to be redesigned resulting in the classic Bf 109 series. In late 1938, the Bf 109E entered production. It entered general service with the Luftwaffe in the spring of 1939. A total of 1,183 E-1 were built, 110 of them were E-1/B fighter bomber versions. There were many small differences between individual E-1s because the E-1 was often modified in the field by groundcrew and rear area repair depots. The production standard was lightly armed with two 7.92mm MG17s above the engine and two in the wings and had no pilot armor. Mods included types of pilot head armor,E-4 type squared canopies, E-7 type pointed spinners, etc., but changing the wing MG17 armament required new different wings. So each model we have created has its own unique features. This aircraft had a flat plate pilot head armor retrofitted. By the time the later Bf 109E-4 and Bf 109E-7 marks were equipping the Jagdgeschwaders a program was initiated to withdraw and remanufacture the surviving E-1s to either full E-4 or E-7 standard. Pstrany is the primary model author with some small model refinement and additions by Captain Kurt as the model was collaborated on during development. Captain Kurt created the textures for each, the 2D instrument panel, the individual .dp files, air files and aircraft.cfg files.

Messerschmitt Bf 109E-1 by Design Team Daedalus Unit: 7./JG54 October 27 1940 crash landed at Lydd, England. Pilot: Fw. Artur Beese To improve on the performance afforded by the 690 hp Jumo 210 of the earlier Bf 109 versions, the larger, longer 1080 hp Daimler-Benz DB 601A engine was used. As a consequence, the nose, cooling system, and wings had to be redesigned resulting in the classic Bf 109 series. In late 1938, the Bf 109E entered production. It entered general service with the Luftwaffe in the spring of 1939. A total of 1,183 E-1 were built, 110 of them were E-1/B fighter bomber versions. There were many small differences between individual E-1s because the E-1 was often modified in the field by groundcrew and rear area repair depots. The production standard was lightly armed with two 7.92mm MG17s above the engine and two in the wings and had no pilot armor. Mods included types of pilot head armor,E-4 type squared canopies, E-7 type pointed spinners, etc., but changing the wing MG17 armament required new different wings. So each model we have created has its own unique features. This aircraft had a flat plate with a curved top pilot head armor retrofitted. By the time the later Bf 109E-4 and Bf 109E-7 marks were equipping the Jagdgeschwaders a program was initiated to withdraw and remanufacture the surviving E-1s to either full E-4 or E-7 standard. Pstrany is the primary model author with some small model refinement and additions by Captain Kurt as the model was collaborated on during development. Captain Kurt created the textures for each, the 2D instrument panel, the individual .dp files, air files and aircraft.cfg files.

Messerschmitt Bf 109E-1 by Design Team Daedalus Unit: 7./JG 27 September 30, 1940 Crash landed at Windsor Park, England Pilot: Oblt. Karl Fischer To improve on the performance afforded by the 690 hp Jumo 210 of the earlier Bf 109 versions, the larger, longer 1080 hp Daimler-Benz DB 601A engine was used. As a consequence, the nose, cooling system, and wings had to be redesigned resulting in the classic Bf 109 series. In late 1938, the Bf 109E entered production. It entered general service with the Luftwaffe in the spring of 1939. A total of 1,183 E-1 were built, 110 of them were E-1/B fighter bomber versions. There were many small differences between individual E-1s because the E-1 was often modified in the field by groundcrew and rear area repair depots. The production standard was lightly armed with two 7.92mm MG17s above the engine and two in the wings and had no pilot armor. Mods included types of pilot head armor,E-4 type squared canopies, E-7 type pointed spinners, etc., but changing the wing MG17 armament required new different wings. So each model we have created has its own unique features. This aircraft was retroitted with the E-4 squared type canopy and flat plate with curved top pilot head armor. By the time the later Bf 109E-4 and Bf 109E-7 marks were equipping the Jagdgeschwaders a program was initiated to withdraw and remanufacture the surviving E-1s to either full E-4 or E-7 standard. Pstrany is the primary model author with some small model refinement and additions by Captain Kurt as the model was collaborated on during development. Captain Kurt created the textures for each, the 2D instrument panel, the individual .dp files, air files and aircraft.cfg files.

Messerschmitt Bf 109E-1 by Design Team Daedalus Unit: 6./JG52 March 1940 Speyer Germany Pilot: unknown To improve on the performance afforded by the 690 hp Jumo 210 of the earlier Bf 109 versions, the larger, longer 1080 hp Daimler-Benz DB 601A engine was used. As a consequence, the nose, cooling system, and wings had to be redesigned resulting in the classic Bf 109 series. In late 1938, the Bf 109E entered production. It entered general service with the Luftwaffe in the spring of 1939. A total of 1,183 E-1 were built, 110 of them were E-1/B fighter bomber versions. There were many small differences between individual E-1s because the E-1 was often modified in the field by groundcrew and rear area repair depots. The production standard was lightly armed with two 7.92mm MG17s above the engine and two in the wings and had no pilot armor. Mods included types of pilot head armor,E-4 type squared canopies, E-7 type pointed spinners, etc., but changing the wing MG17 armament required new different wings. So each model we have created has its own unique features. This model is the basic factory production standard. By the time the later Bf 109E-4 and Bf 109E-7 marks were equipping the Jagdgeschwaders a program was initiated to withdraw and remanufacture the surviving E-1s to either full E-4 or E-7 standard. Pstrany is the primary model author with some small model refinement and additions by Captain Kurt as the model was collaborated on during development. Captain Kurt created the textures for each, the 2D instrument panel, the individual .dp files, air files and aircraft.cfg files.

Messerschmitt Bf 109E-1 by Design Team Daedalus Unit: 5./JG 26 July, 1940 Marquise, France Pilot: Lt. Hans Krug To improve on the performance afforded by the 690 hp Jumo 210 of the earlier Bf 109 versions, the larger, longer 1080 hp Daimler-Benz DB 601A engine was used. As a consequence, the nose, cooling system, and wings had to be redesigned resulting in the classic Bf 109 series. In late 1938, the Bf 109E entered production. It entered general service with the Luftwaffe in the spring of 1939. A total of 1,183 E-1 were built, 110 of them were E-1/B fighter bomber versions. There were many small differences between individual E-1s because the E-1 was often modified in the field by groundcrew and rear area repair depots. The production standard was lightly armed with two 7.92mm MG17s above the engine and two in the wings and had no pilot armor. Mods included types of pilot head armor,E-4 type squared canopies, E-7 type pointed spinners, etc., but changing the wing MG17 armament required new different wings. So each model we have created has its own unique features. This model is the basic factory production standard, but we have chosen to include it because of the unique history of its pilot Ltn. Hans Krug. He was born in 1899 and served in various Royal Bavarian aviation units during the Great War. He was flying combat missions from March till May 1918. Considered too old for fighter pilot in Germany during the mid-1930s, he then joined the Spanish Nationalist air force instead of Legion Condor like other German volunteers . Krug often flew alongside Spanish ace Joaquin Garcia Morato, whose Fiat CR.32 carried bullfighting motto VISTA SUERTE Y AL TORO (The look, good fortune and go for the bull!). Krug adopted this inscription on his Emil when he was finally accepted into Luftwaffe with rank of Leutnant, and entered successful service with II./JG 26 Schlageter . With 5./JG 26 he scored five victories during French campaign including one unconfirmed. Krug scored additional five victories during Battle of Britain and took over leadership of 4./JG 26. At the time he was 41 years old and the only World War One pilot who became a World War Two ace! He was shot down by RAF fighters over England, belly landing near Pluckley on September 7, 1940 to become a POW. Pstrany is the primary model author with some small model refinement and additions by Captain Kurt as the model was collaborated on during development. Captain Kurt created the textures for each, the 2D instrument panel, the individual .dp files, air files and aircraft.cfg files.