FSX/P3D>v4 General Dynamics F-16 Fighting Falcon Package. This is the P3Dv4 stock ai F16 model with the added TeamKBT F2 interior model and compatible with P3D versions up to V4.*. This AI aircraft comes from P3D4, it is quite a good ai model. No opening window and fly carefully as it it pretty quick! Other updates, views, levels, etc by Chris Evans. Tested in P3D4 but should be fine in FSX and earlier P3D versions.

FSX/P3D>v4 Lockheed C130 Hercules Package. This is the P3Dv4 stock ai model with the added Nimrod interior model by Brian Franklin modified with gauges updated to be compatible with P3D versions up to V4.*. This allows the aircraft to be flyable adding a VC and useable 2d panel. This AI aircraft comes from P3D4, it is quite a good ai model. Other updates by Chris Evans. Tested in P3D4 but should be fine in FSX and earlier P3D versions.

The Rockwell-Messerschmitt-Bolkow-Blohm X-31 was an experimental jet fighter designed to test fighter thrust vectoring technology. It was designed and built by Rockwell and Messerschmitt-Bölkow-Blohm (MBB), as part of a joint US and German Enhanced Fighter Maneuverability program to provide additional control authority in pitch and yaw, for significantly more maneuverability than most conventional fighters. An advanced flight control system provided controlled flight at high angles of attack where conventional aircraft would stall or lose control. Two aircraft were built, of which only one has survived. This is an FSX update for the X-31 featuring a dramatically improved VC and a new 2D panel. I've tried to create both panels as closely to the real panel as possible. Automatic exhaust smoke and afterburner effect added. Thanks and credits go to Capt. I. D'Attomo for the original model. New panels and some other improvements by Michael Pook.

FSX/P3D Lockheed KC130 (C130) Hercules Package. FSX Native original AI C130 with the added Nimrod interior model by Brian Franklin with gauges updated to be compatible with P3D versions up to V4.*. This gives the previously aircraft a VC and useable 2d panel. This AI aircraft comes from FS2002, it was converted to FSX native format with MDLX Converter and it is a very basic, but flyable AI model with automatically activated tank hoses. Other updates by Chris Evans. Tested in P3D4 but should be fine in FSX and earlier P3D versions.

FSX/P3Dv3,v4 Fury FJ-3. North American began work on an uprated version of the Fury with a Wright J65-W-2 Sapphire engine, with the company designation of "NA-194" and Navy designation of "FJ-3". A contract for 389 FJ-3s was awarded to NAA in April 1952. The first production FJ-3 was completed in December 1953. The type was enthusiastically accepted by the Navy. Service deliveries of the FJ-3 began in 1954. An additional contract was placed that year, bringing the total of FJH-3s delivered to 538 before the end of 1956. The type equipped 12 Navy squadrons. FSX/P3Dv3,v4 mdl by A.F.Scrub

Croatian Air Force textures for the Ivan Jurcaga MiG 21 MF. The v1 stands for the first version of the livery as there are imperfections in it. For example, the "coat of arms" (in croatian we say "grb") on the right side of the tail is incorrectly placed, the acronymes scattered around the frame aren't in croatian but instead they are in czech, the ones that already come with the paintkit and much more stuff that hasn't been improved/finished. All of that will be fixed in the next version once it comes out. Until then, hope you enjoy this livery as much as I did while making and testing it out!

FSX/P3D Northrop F-20 Tigershark RNAF, Turkish Stars (Aerobatic team) and 'Iris' triple package. First flown in 1982, The Northrop F20 Tigershark was a highly capable light flighter with a range of 2750km/1700m . The ex payware Iris F-20 with 3 liveries - RNAF (Royal Netherlands Airforce), Turkish Stars (Aerobatic demonstration team of the Turkish Air Force) and Iris Demo. Added the fine liveries by Rene Spaan, Thomas Schedl. Fixed wheel sink, co-ordinated VC's. Manual included. Assembled and tested in P3Dv4 by Chris Evans. Should also work in FSX and previous P3D versions.

FSX/P3D Raytheon/Beechcraft T-6 Texan II Military Trainer Pack 4. This is the ex-payware T-6 II Texan from Iris in 3 military liveries. PC-9 Royal Thai Air Force, RAF red and white and Thai AF Hurkus Demonstration. The Beechcraft T-6 Texan II is a single-engine turboprop aircraft built by the Raytheon Aircraft Company. A trainer aircraft based on the Pilatus PC-9, the T-6 has replaced the Air Force's Cessna T-37B Tweet and the Navy's T-34C Turbo Mentor. Special thanks to Iris Simulations/Dave Brice for allowing this to be distributed free. Thanks to Andy Nott, Kittisak Rukkaew, Ahmet Memetbeyoglu for the great textures. Put together and tested in P3Dv4 by Chris Evans. Should work in FSX and all previous P3D versions.

FSX/P3D North American Supersonic Ra-5C (A-5) Vigilante USN Package 2. Liveries: US Navy RA-5C Vigilante RVAH-7 "Peacemakers" 610NE USS Ranger 1979; 603AJ USS Nimitz 1976 and "Checkertails" 601NG USS Constellation 1967. The Vigilante is an American carrier-based supersonic bomber aircraft manufactured by North American Aviation for the United States Navy betwen 1961 and was retired in 1979. The Ra5c variant saw extensive use in Vietnam as a tactical strike aircraft. It also holds several world records including speed and altitude. Original ex-payware model by Alphasim/Virtavia converted to FSX native format by LLS. Added the great textures by Antionio Diaz converted to dds format. Included bomb and missions files for those who know how to use them. Assembled and tested in P3D4 and should also work in FSX and earlier P3D by Chris Evans.

P3D/FSX McDonnell Douglas F-4B Phantom II US Marines Package. 3 USAF/Marines liveries ; Marines 45th TFS/2nd AD, Marines VMFA-333 Clean, Marines VMFA-351 AA. The McDonnell Douglas F-4 Phantom II is a tandem two-seat, twin-engine, all-weather, long-range supersonic jet interceptor and fighter-bomber originally developed for the United States Navy by McDonnell Aircraft. It first entered service in 1960 with the U.S. Navy. FSX Native model rebuilt by David Robles from the Virtavia/Alphasim original. VC is the LLS conversion which near matches the F4 VC. Added the realistic high quality textures by Steve Bryant, Virtavia and interior textures by Virtavia. Tested in P3D v4.2 and should work in FSX and P3D 4.3 and earlier P3D versions. Package assembled by Chris Evans. ***NOTE: P3D aircraft does not show in select preview window but seems to show up in the sim without issue.