This is a repaint for the amazing TDS Boeing 737-600NG. It includes the base model, high-quality textures, a VC, and custom ground service vehicles. Canadian Airlines never flew the Boeing 737-600NG. Canadian Airlines did fly a fleet of 77 737-200's and -300's. However, in our new universe, Canadian Airlines has taken delivery of one single Boeing 737-600NG, which is available to fly any route of your choice. It flies under the fictional registration C-GPXA and the tail number 566. About the Livery Upon its founding in 1987, Canadian Airlines revealed its new livery using the colours light grey, dark grey, navy blue, and red. The paint scheme was an adaptation of the recently introduced livery from its predecessor Canadian Pacific Airlines. The lower half of the aircraft's body was navy blue, topped with light grey and red stripes, while the tail was blue, with approximately one-third taken up by the carrier's new logo. The new Canadian Airlines logo was a combination of Canadian Pacific's five grey stripes, representing the five continents served by the carrier. Over these stripes was a thick, bright red chevron. The chevron was a simplification of the Pacific Western Airlines logo. The chevron was placed over the stripes, which then represented "Wings over 5 continents". It was also an ingenious and subtle way to represent the takeover of CP by PWA. The same logo, in a square form, became a clever alternative to a true bilingual name on the fuselage replacing the French "e", and the third "a" in English (Canadian/Canadien). Includes: - Base Model Boeing 737-600NG aircraft by TDS - Textures for Canadian Airlines livery. - Canadian Airlines Boeing 737-600NG C-GPXA - Full working VC upgraded to HD by Enrique Cornejo - Custom Canadian Airlines CT Services (Modeled by TDS, Painted by Julian Flight) - Custom Canadian Airlines Cargo Loading Services (Modeled by TDS, Painted by Julian Flight) - Custom Canadian Airlines Passenger Shuttle (Modeled by TDS, Painted by Julian Flight) - Custom Canadian Airlines Empress Lounges AirStairs (Modeled by TDS, Painted by Julian Flight) - Custom Shell VIPjet fuel services (Modeled by TDS, Painted by Julian Flight)

This is a repaint for the amazing TDS Boeing 737-700NG. It includes the base model, high-quality textures, a VC, and custom ground service vehicles. Canadian Airlines never flew the Boeing 737-700NG. Canadian Airlines did fly a fleet of 77 737-200's and -300's. However, in our new universe, Canadian Airlines has taken delivery of one single Boeing 737-700NG, which is available to fly any route of your choice. It flies under the fictional registration C-GPWI and the tail number 564. About the Livery Upon its founding in 1987, Canadian Airlines revealed its new livery using the colours light grey, dark grey, navy blue, and red. The paint scheme was an adaptation of the recently introduced livery from its predecessor Canadian Pacific Airlines. The lower half of the aircraft's body was navy blue, topped with light grey and red stripes, while the tail was blue, with approximately one-third taken up by the carrier's new logo. The new Canadian Airlines logo was a combination of Canadian Pacific's five grey stripes, representing the five continents served by the carrier. Over these stripes was a thick, bright red chevron. The chevron was a simplification of the Pacific Western Airlines logo. The chevron was placed over the stripes, which then represented "Wings over 5 continents". It was also an ingenious and subtle way to represent the takeover of CP by PWA. The same logo, in a square form, became a clever alternative to a true bilingual name on the fuselage replacing the French "e", and the third "a" in English (Canadian/Canadien). Includes: - Base Model Boeing 737-700NG aircraft by TDS - Textures for Canadian Airlines livery. - Canadian Airlines Boeing 737-700NG C-GPWI - Full working VC upgraded to HD by Enrique Cornejo - Custom Canadian Airlines CT Services (Modeled by TDS, Painted by Julian Flight) - Custom Canadian Airlines Cargo Loading Services (Modeled by TDS, Painted by Julian Flight) - Custom Canadian Airlines Passenger Shuttle (Modeled by TDS, Painted by Julian Flight) - Custom Canadian Airlines Empress Lounges AirStairs (Modeled by TDS, Painted by Julian Flight) - Custom Shell VIPjet fuel services (Modeled by TDS, Painted by Julian Flight)

Turbo Commander Air Attack Textures Pack. I made the majority of these paints. Credit to Nicholas Mitchell for making the VH-ATF, VH-LVG, and the Conair liveries. I just used them as a base for the others.

This is a repaint for the amazing Project OpenSky Bombardier CRJ-900ER in the Canadian Regional Livery. It includes the base model, high-quality textures, and a VC. The story of C-GYCR is an interesting one indeed. First off, it is not a CRJ-900, but a Fokker F-28. I would have painted it accurately, but I can't find an FSX-compatible Fokker F-28, so we'll have to deal with it in this iteration. C-GYCR began its life in Germany with GermanAir in 1972. After changing hands several times, it ended up with Canadian Regional, a subsidiary of Canadian Airlines. After being sold to Air Canada, Canadian Regional was no longer, and the aircraft was retired, but its journey didn't end there. After sitting for years C-GYCR was bought by a private individual who is involved with the Time Air Historical Society, a society dedicated to the preservation of Canadian aircraft. To this day, it sits on his property in Alberta, Canada and he welcomes people to come on board and see how it looked in 2001. VC and Cockpit Info: This cockpit and VC is the default CRJ-700 panel and VC. Includes: - Base Model Bombardier CRJ-900 aircraft by Project OpenSky - Textures for Canadian Regional livery. - Air Canada Bombardier CRJ-900 C-GYCR - Full working VC - Full working 2d panel

This is a repaint for the amazing TDS Boeing 737-MAX 10. It includes the base model, high-quality textures, a VC, and custom ground service vehicles. Canadian Airlines never flew the Boeing 737-MAX10, as by the time the company was absorbed by Air Canada in 1999 the aircraft did not exist. Canadian Airlines did fly a fleet of 77 737-200's and -300's. However, in our new universe, Canadian Airlines has taken delivery of one single Boeing 737-MAX10, which is available to fly any route of your choice. It flies under the registration C-GDPW and the tail number 742. About the real C-GDPW --------------------- C-GDPW was a 737-200 in real life. It entered service in October of 1975 for Pacific Western Airlines. On April 26th, 1987 it was sold to Canadian Airlines. After changing ownership throughout the decades, it was finally sold to Trans Air as a converted cargo airliner, where it ended its life. On July 2nd, 2021 C-GDPW took off from Honolulu International Airport to Kahului Airport on the neighboring Hawaiian island of Maui. Immediately after takeoff, the 737-200 lost one of its engines, and the pilots were forced to ditch the aircraft off the coast of Hawaii. Both pilots survived. Includes: - Base Model Boeing 737-MAX10 aircraft by TDS - Textures for Canadian Airlines livery. - Canadian Airlines Boeing 737-MAX10 C-GDPW - Full working VC styled for the new MAX10 - Custom Canadian Airlines CT Services (Modeled by TDS, Painted by Julian Flight) - Custom Canadian Airlines Passenger Shuttle (Modeled by TDS, Painted by Julian Flight) - Custom Canadian Airlines Empress Lounges AirStairs (Modeled by TDS, Painted by Julian Flight) - Custom Shell VIPjet fuel services (Modeled by TDS, Painted by Julian Flight)

This is a repaint of the UKMIL Buccaneer in a more updated livery of ZU-BCR (Thunder City)

This is the very well done Veneaviones Rockwell AC690B Turbo Commander. Originally released for FS2004. This aircraft was updated by George Arana of Eagle Rotorcraft and myself to update the functionality of this great aircraft for P3Dv4+. The aircraft has updated VC and exterior model with the addition of PBR, and 15 4k textures included. Including a blank white version for repainters. The pack houses only a few stock repaints, the rest are primarily those used in aerial coordination and observation for firefighting roles across the USA, Canada, and Australia. The aircraft themselves for these roles were not modified in any way, except for the addition of a smoke generator. Those wishing to use these as GA aircraft will be pleased to know they are stock aside from that. This pack includes both the straight wing and winglet version of the 690B. I have also included 2 additional models, largely for repainters to have a belly mapped version to allow for repainters to easily add repaints with text on the belly of the 690 if they wish. Being as the aircraft largely remains unchanged minus the cosmetic updates. All of the original FS9/FSX paints can be moved to this aircraft without issue. P3Dv4+ conversion by George Arana of Eagle Rotorcraft further model updates and repaints by Nicholas Mitchell of Simulated Air Tanker Operations.

Project Opensky Boeing 777-200LR. Livery by Luis Quintero. VC & Gauges by Jacob Kubique, Zachary777, Speedbird77, G. Munro, and Ken Wiggington. GE90 sound pack by by SkyHigh Audio Simulations, and Audiosim. SkySpirit2019 Boeing 777-9 R3. Livery by Stefan Bree. VC by Erik BENDER. GE90 sound pack by by SkyHigh Audio Simulations, and Audiosim. TDS Boeing 787-8. Livery & VC by Erik BENDER. B787 GEnx Sound Pack by kairi Akai. I've edited the Radius & Bounding Box of each aircraft using RADItor to make the aircraft less far away from the camera. Re-did some of the lights and added many additional ones including VC light for the 777-200LR & 777-9. Re-did some of bugged textures and added new ones too. And many new camera views.

This is my second upgrade package for the 'FSX/P3D Cessna 152-F G-BLAX' Cessna 152 freeware package. Probably this will be my last upgrade for the aircraft. This is NOT the whole aircraft, it is an update package. This second version Fix/Upgrade for P3D4+ has some small minor changes compared to my first fix/Upgrade for the Just Flight C-152 Free. The first version is not needed anymore as they are in this package as well. Most noteworthy upgrade now is the rebuild and enhancement of the 32-bits radio gauges* which now look as the original ones but are now pure XML. Radio gauges now look the same as in the FSX version as the same bitmaps were used. Package also contains three liveries, a different sound set, and cockpit sounds. Hope you like it. * The first update did contain stock FSX Bendix King radio gauges. For installation and credits read the WhatIsThis.txt

FSX/P3D Boeing 737 Max 8 Skyup Package. Ukrainian airline Skyup currently has 2 Boeing 737 Max 8 on order. The high spec Boeing 737-Max 8 from TDS. The VC is the Microsoft/Alejandro Rojas Lucena/FSND base modified by Speedbird77 to resemble a Max cockpit, including gauges by G. Munro. There are custom CFM eco sounds included for that extra realism. Use - Instrument panel - Util for ground vehicles, doors stairs, fuel truck, buses. New Utility allows Bus, fuel, doors and more. (Go to Views - Instrument panel - Utility). VC added and edited to allow correct VC views, correct jetways and wheel levels. Credits go to TDS fantastic native FSX Boeing Max8 model. I added PDF B737 checklist. Textured, packaged and prepared for FSX & P3D up to v5 by Chris Evans.