The Vought F7U Cutlass was a United States Navy carrier-based jet fighter and fighter-bomber of the early Cold War era. It was a highly unusual, semi-tailless design, allegedly based on aerodynamic data and plans captured from the German Arado company at the end of World War II. Regarded as a radical departure from traditional aircraft design, the Cutlass suffered from numerous technical and handling problems throughout its short service career. The type was responsible for the deaths of four test pilots and 21 other U.S. Navy pilots. This is an FSX update of the FS2002/2004 model deigned by RanchoJen models and features a modified 2D panel and a highly detailed static VC (non-functional gauges). Automatic smoke and afterburner effects added. Credits go to the designers mentioned above, whom I've tried to ask their permission for this update but their E-Mail as well as the link mentioned in their readme is invalid anymore. Modified 2D panel, new static VC as well as effect configuration by Michael Pook.

FSX/P3D Airbus A340-300 TAP Air Portugal package. As of April 2018, TAP operate 4 Airbus A340-300 aircraft flying globally. These are due to be phased out in 2020. Model by Thomas Ruth. Added the better Thomas Ruth modified VC with latest updates by Chris Evans and Louis Quintero. Textures by Cillian Coleman. Incluced VC texture upgrade by Enrique Cornejo. Added correct jetway configs, wing views and wheel levels. Manual included. Assembled for FSX by Chris Evans.

FSX/P3D>v4 Boeing 747-400ERF Emirates SkyCargo Package. Emirates Skycargo is based in Dubai in the United Arab Emirates and is currently the world's 2nd largest cargo airline. As of March 2018, Emirates Sky Cargo operate 2 Boeing 747-400F flying to destinations throughout the world. Project Opensky Boeing 747-400 assembled and upgraded for FSX with the upgraded Boeing 747 internal cockpit (VC) from Alejandro Rojas Lucenda (Manual included). This is the Project Opensky FSX native Boeing 747-400F model, and includes ground cargo servicing, stairs (FSX - Go to Views - Instrument Panel -Posky Utility. P3D go to Vehicle - Instrument Panel -). Included CF engine sounds from BrandonG, with realistic jet whine to make your flight sound great. Thank you to Project Opensky for their contributions to the worldwide community of flight simulation. I have added the realistic textures by RyanC. Also includes the Boeing 747 VC textures upgrade. This give a much clearer 747 interior virtual cockpit look. Zip preview for larger pictures. Assembled and edited for P3D 3 / 4 & FSX by Chris Evans.

AIRFIX's texture for Wolfgang "Wolfi" Faber's Curtiss SB2C-4/5 Helldiver. Requires FSX updated model - link below

KFLL - Ft Lauderdale-Hollywood Intl Airport, Florida. This is Ray Smith's FSX file. Ray has given me permission to revise and update his file for P3Dv4. The new runway 10R/28L added with ILS included. Assigned parking as per their website with extra parking including. Gate E9 for assigned for the Norwegian long haul 787. Taxiways and taxi signs updated to the latest charts. Runway 13/31 removed. Extra fuel trucks, helipad, support vehicle roads rebuilt and many other scenery improvements. By Robert Catherall

Raytheon/Beechcraft T-6A Texan II of Argentine Military Flying School (Escuela de Aviacion Militar) textures only.You will need to download the IRIS Simulations T-6A Texan II freeware irisclassicst6.zip for this(X payware) from Simviation's FSX Military pages for thos.Both pilot figures are animated.Smoke effects wing contrail detailed VC and 2D panels.Main textures are in 2048 px DDS 5 mode for higher resolution.By Yiannis Katehis Tsetsas 2018.File size (8.78 MB)

Mitsubishi F-2A/B for FSX and P3Dv5 The Mitsubishi F-2 is a multirole fighter derived from the General Dynamics F-16 Fighting Falcon. Thank you for downloading. About the model This model has been created to conform to FSX and P3Dv4. For P3D we have not tested with V1 V2 V3. As for P3D use, there are also sides that we have not yet managed to grasp P3D, Please note that it may not be the best model. Current VC is F-2A and F-2B are both single-seat VC. In short, F-2A's VC is used for F-2B. Also, we can not do engine start operation at VC. Please use Ctrl + E to start the engine. By Team KBT

Mitsubishi F-2A/B for P3Dv5 V1.2. The Mitsubishi F-2 is a multirole fighter derived from the General Dynamics F-16 Fighting Falcon. Thank you for downloading. About the model This model has been created to conform to FSX and P3Dv4. For P3D we have not tested with V1 V2 V3. As for P3D use, there are also sides that we have not yet managed to grasp P3D, Please note that it may not be the best model. Current VC is F-2A and F-2B are both single-seat VC. In short, F-2A's VC is used for F-2B. Also, we can not do engine start operation at VC. Please use Ctrl + E to start the engine. By Team KBT

Royal Canadian Air Force Lockheed CP-140 Aurora for FSX and P3Dv4. Adrian Brausch precisely repainted CP-140 Aurora with high resolution, and Team FS KBT created a special model. This model of Block 1 specification created wingtip Radomes and antennas in detail. 5 types of painting including special painting can be enjoyed. Although models are included, many textures, gauges and sounds read the P-3C Orion FSX. Therefore, P-3C Orion FSX is required. ("P-3C ORION FSX" created by us can be displayed on P3Dv4.) Team FS KBT with Adrian Brausch

P3D V4 Erbil International Airport-ORER. Erbil International Airport (IATA: EBL, ICAO: ORER), is the main airport of the city of Erbil in Iraqi Kurdistan. The airport has facilities for both cargo and passengers. The airport was built at the beginning of the 1970s as an Iraqi military base (Z16J). The airstrip was used as a military base until 1991. On 26 May 2005, the airport was given the ICAO airport code, ORER. The new airport is next to the old airport (Z16J) and has one of the world's longest runways, 4,800 m × 75 m (15,748 ft × 246 ft) and is equipped for ILS CAT II operations. This Airport is not included in P3Dv4, it is AI ready and has some small, medium airliner,cargo and GA parking space. This airport uses stoke library objects and does not need any 3rd party object library. By MAK.