FSX/P3Dv4,v5 Bell P63 Kingcobra_Fix This mod fixes the flying caracteristics and the elevator trim. Use elevator trim for take off. Replace the model map, aircraft.cfg and airfile files by the new ones. Fix by A.F.Scrub.

FSX/P3Dv4,v5 Bell P63 Kingcobra When the United States entered World War II, the Bell P-39 was its primary fighter plane. The Kingcobra was designed to address the shortcomings of the P-39 Airacobra, it was a fast airplane . its performance approaching that of the P-51 , but since the P-51 and P-47 were in full production, about 2,400 of the 3,303 P-63s produced were sent to the Soviet Union under the Lend-Lease act. France used some in Indo-China after the end of World War II. The U.S. used it as a test plane and, in a unique version, as live gunnery target training for bomber crews. Native FSX/P3D mdls, 3 variants, by A.F.Scrub.

Vought F4U-7 Corsair Royal Navy A130 for FSX and P3D. Alpha Bleu Ciel model converted to FSX native format by LLs. Updated with different flight dynamics and revised gauges so it now works in P3D v5. Credits to Alpha Blue, LLS, Milton Shupe for some gauge and flight dynamics. . Danny Garnier YOU MUST FLY With Care,. practice to fly well.

FSX/P3Dv4,v5 Bell P39 Airacobra When the United States entered World War II, the Bell P-39 was its primary fighter plane. By war’s end, nearly 10,000 had been produced in nearly 48 variants, making the “Airacobra” one of Bell’s most successful aircraft ever. Native FSX/P3D mdls, 6 variants, by A.F.Scrub.

FSX/P3D Douglas DC3 Buffalo Airways 2D and VC Panels (including missing file). I am hesitant about publishing this as I did not have much documentation to work from. Nevertheless this has a pretty fair reproduction of the Buffalo Airways cockpit in the 2D panel and the VC has a cockpit more similar to the default DC3 with some gauges repositioned. Many gauges are very like the excellent default gauges but have been rewritten and some errors corrected. This panel is designed for 1920X1080 monitors and will not work well on other sizes. An aircraft in Buffalo Airways paint scheme is included although this is a C-47 rather than a DC3. The panel and VC also work fine on the default DC3 but not the Buffalo Airways repaint. Note that the autopilot is basic on the DC3 - only heading and pitch are controlled - so most flying including landing is manual. The GPS can be used as a guide but is not linked to the autopilot. Please read instructions.

FSX/P3Dv3,v4,v5 Sopwith Snipe Gunsight en propfix Replace both mdl maps and the textures.common files. Proptextures by A.Ludick, models by by A.F.Scrub

FSX/P3Dv3,v4,v5 Sopwith Snipe A distinct evolution over the Camel, the Sopwith Snipe was considered the best allied fighter of the western front at the end of the First World War. Developed in late 1917, the Snipe went into production the following year featuring a new engine, the Bentley BR2 rotary of 230/250 HP. Models by A.F.Scrub

FSX/P3Dv3,v4,v5 Sopwith Salamander The Sopwith TF.2 Salamander was a British ground-attack aircraft of the First World War designed by the Sopwith Aviation Company which first flew in April 1918. It was a single-engined, single-seat biplane, based on the Sopwith Snipe fighter, with an armoured forward fuselage to protect the pilot and fuel system from ground fire during low level operations. Model by A.F.Scrub

FSX/P3Dv3,v4,v5 Sopwith Pup British rotary-engined fighter 1916-1917. The Pup enjoyed an enviable reputation for simplicity and strength, and was generally reckoned a joy to fly. Models by A.F.Scrub

FSX/P3Dv3,v4.v5 Piper Cub floatplanes The Piper J-3 Cub is an American light aircraft that was built between 1938 and 1947 by Piper Aircraft. The aircraft has a simple, lightweight design which gives it good low-speed handling properties and short-field performance. The Cub is Piper Aircraft's most-produced model, with nearly 20,000 built in the United States. Its simplicity, affordability and popularity invokes comparisons to the Ford Model T automobile. Two floatplane variants by A.F.Scrub.