Messerschmitt Bf 109E-3 by Design Team Daedalus Unit: 2./JG 2 Spring 1940 Frankfurt, Germany Pilot: unknown To improve the performance of the Bf 109E, the last two real prototypes (V16 and V17) were constructed. These received some structural improvements and more powerful armament. Both were the basis of the Bf 109 E-3 version. The E-3 was armed with the two MG 17s above the engine and one MG FF cannon in each wing. Some units began recieving the E-3 by September 1939. A total of 1,276 E-3 were built, including 83 E-3a export versions. There were many small differences between indivual E-3s because the E-3 was often modified in the field by groundcrew and rear area repair depots. The production standard had no pilot armor. Mods included types of pilot head armor,E-4 type squared canopies, E-7 type pointed spinners, etc. So each model we have created has its own unique features. This aircraft was the factory production standard. Pstrany is the primary model author with some small model refinement and additions by Captain Kurt as the model was collaborated on during development. Captain Kurt created the textures for each, the 2D instrument panel, the individual .dp files, air files and aircraft.cfg files.

Messerschmitt Bf 109E-3 by Design Team Daedalus Unit: 1./JG 26 1940 Caffiers, France Pilot: Oblt. Walter Blume To improve the performance of the Bf 109E, the last two real prototypes (V16 and V17) were constructed. These received some structural improvements and more powerful armament. Both were the basis of the Bf 109 E-3 version. The E-3 was armed with the two MG 17s above the engine and one MG FF cannon in each wing. Some units began recieving the E-3 by September 1939. A total of 1,276 E-3 were built, including 83 E-3a export versions. There were many small differences between indivual E-3s because the E-3 was often modified in the field by groundcrew and rear area repair depots. The production standard had no pilot armor. Mods included types of pilot head armor,E-4 type squared canopies, E-7 type pointed spinners, etc. So each model we have created has its own unique features. This aircraft was modified with flat plate pilot head armor. Pstrany is the primary model author with some small model refinement and additions by Captain Kurt as the model was collaborated on during development. Captain Kurt created the textures for each, the 2D instrument panel, the individual .dp files, air files and aircraft.cfg files.

Messerschmitt Bf 109E-7/Trop by Design Team Daedalus Unit: 2./JG27 Ain-el-Gazala. Libya 191 Pilot: Hptm. Eduard Neumann Following the E-4, the E-7 was the next major production variant, entering service and seeing combat at the end of August 1940. One of the limitations of the earlier Bf 109Es was their short range of 660 km (410 mi) and limited endurance, as the design was originally conceived as a short-range interceptor. The E-7 rectified this problem as it was the first Bf 109 subtype to be able to carry a drop tank, usually the standardized Luftwaffe 300 L (79 US gal) capacity unit mounted on a centre-line rack under the fuselage, which increased its range to 1,325 km (820 mi). Fuel from the drop tank was pumped to the internal fuel tank via a large fuel line that ran up and along the inside starboard wall of the cockpit, with a clear sight glass located in the fuel line's main span so the pilot could easily see the flow of fuel and know when the tank was empty. Alternatively, a bomb could be fitted and the E-7 could be used as a Jabo fighter-bomber. Previous Emil subtypes were progressively retrofitted with the necessary fittings for carrying a drop tank from October 1940. Early E-7s were fitted with the 1,100 PS DB 601A or 1,175 PS DB 601Aa engine, while late-production ones received 1,175 PS DB 601N engines with improved altitude performance the latter was designated as E-7/N. A total of 438 E-7s of all variants were built. There were many small differences between individual E-7s because the E-7 was often modified in the field by groundcrew and rear area repair depots. The production standard had no pilot armor. Mods included types of pilot head armor, armored windscreen, tropical sand filters, etc. So each model we have created has its own unique features. This aircraft was modified as an E-7/Trop with a tropical sand filter and flat plate pilot head armor. This aircraft was originally with JG54 in France before being hurriedly modified, transferred to JG 27, and sent to Africa, still wearing its European camouflage. Pstrany is the primary model author with some small model refinement and additions by Captain Kurt as the model was collaborated on during development. Captain Kurt created the textures for each, the 2D instrument panel, the individual .dp files, air files and aircraft.cfg files.

Messerschmitt Bf 109E-7 by Design Team Daedalus Unit: III./JG5 Petsamo, Finland 1942 Pilot: Hptm. Gunther Scholz Following the E-4, the E-7 was the next major production variant, entering service and seeing combat at the end of August 1940. One of the limitations of the earlier Bf 109Es was their short range of 660 km (410 mi) and limited endurance, as the design was originally conceived as a short-range interceptor. The E-7 rectified this problem as it was the first Bf 109 subtype to be able to carry a drop tank, usually the standardized Luftwaffe 300 L (79 US gal) capacity unit mounted on a centre-line rack under the fuselage, which increased its range to 1,325 km (820 mi). Fuel from the drop tank was pumped to the internal fuel tank via a large fuel line that ran up and along the inside starboard wall of the cockpit, with a clear sight glass located in the fuel line's main span so the pilot could easily see the flow of fuel and know when the tank was empty. Alternatively, a bomb could be fitted and the E-7 could be used as a Jabo fighter-bomber. Previous Emil subtypes were progressively retrofitted with the necessary fittings for carrying a drop tank from October 1940. Early E-7s were fitted with the 1,100 PS DB 601A or 1,175 PS DB 601Aa engine, while late-production ones received 1,175 PS DB 601N engines with improved altitude performance the latter was designated as E-7/N. A total of 438 E-7s of all variants were built. There were many small differences between individual E-7s because the E-7 was often modified in the field by groundcrew and rear area repair depots. The production standard had no pilot armor. Mods included types of pilot head armor, armored windscreen, tropical sand filters, etc. So each model we have created has its own unique features. This aircraft was modified with a flat plate with curved top pilot head armor and an armored glass windscreen. Pstrany is the primary model author with some small model refinement and additions by Captain Kurt as the model was collaborated on during development. Captain Kurt created the textures for each, the 2D instrument panel, the individual .dp files, air files and aircraft.cfg files.

Messerschmitt Bf 109E-7 by Design Team Daedalus Unit: 7./JG26 Gela, Sicily 1941 Pilot: Oblt. Joachim Muncheberg Following the E-4, the E-7 was the next major production variant, entering service and seeing combat at the end of August 1940. One of the limitations of the earlier Bf 109Es was their short range of 660 km (410 mi) and limited endurance, as the design was originally conceived as a short-range interceptor. The E-7 rectified this problem as it was the first Bf 109 subtype to be able to carry a drop tank, usually the standardized Luftwaffe 300 L (79 US gal) capacity unit mounted on a centre-line rack under the fuselage, which increased its range to 1,325 km (820 mi). Fuel from the drop tank was pumped to the internal fuel tank via a large fuel line that ran up and along the inside starboard wall of the cockpit, with a clear sight glass located in the fuel line's main span so the pilot could easily see the flow of fuel and know when the tank was empty. Alternatively, a bomb could be fitted and the E-7 could be used as a Jabo fighter-bomber. Previous Emil subtypes were progressively retrofitted with the necessary fittings for carrying a drop tank from October 1940. Early E-7s were fitted with the 1,100 PS DB 601A or 1,175 PS DB 601Aa engine, while late-production ones received 1,175 PS DB 601N engines with improved altitude performance the latter was designated as E-7/N. A total of 438 E-7s of all variants were built. There were many small differences between individual E-7s because the E-7 was often modified in the field by groundcrew and rear area repair depots. The production standard had no pilot armor. Mods included types of pilot head armor, armored windscreen, tropical sand filters, etc. So each model we have created has its own unique features. This aircraft was modified with flat plate pilot head armor and had a command pennant atached to the antenna mast. Pstrany is the primary model author with some small model refinement and additions by Captain Kurt as the model was collaborated on during development. Captain Kurt created the textures for each, the 2D instrument panel, the individual .dp files, air files and aircraft.cfg files.

Messerschmitt Bf 109E-7 by Design Team Daedalus Unit: 3.(J)LG2 Calais-Marck, France Aug 1940 Pilot: unknown Following the E-4, the E-7 was the next major production variant, entering service and seeing combat at the end of August 1940. One of the limitations of the earlier Bf 109Es was their short range of 660 km (410 mi) and limited endurance, as the design was originally conceived as a short-range interceptor. The E-7 rectified this problem as it was the first Bf 109 subtype to be able to carry a drop tank, usually the standardized Luftwaffe 300 L (79 US gal) capacity unit mounted on a centre-line rack under the fuselage, which increased its range to 1,325 km (820 mi). Fuel from the drop tank was pumped to the internal fuel tank via a large fuel line that ran up and along the inside starboard wall of the cockpit, with a clear sight glass located in the fuel line's main span so the pilot could easily see the flow of fuel and know when the tank was empty. Alternatively, a bomb could be fitted and the E-7 could be used as a Jabo fighter-bomber. Previous Emil subtypes were progressively retrofitted with the necessary fittings for carrying a drop tank from October 1940. Early E-7s were fitted with the 1,100 PS DB 601A or 1,175 PS DB 601Aa engine, while late-production ones received 1,175 PS DB 601N engines with improved altitude performance the latter was designated as E-7/N. A total of 438 E-7s of all variants were built. There were many small differences between individual E-7s because the E-7 was often modified in the field by groundcrew and rear area repair depots. The production standard had no pilot armor. Mods included types of pilot head armor, armored windscreen, tropical sand filters, etc. So each model we have created has its own unique features. This aircraft was modified with a flat plate with curved top pilot head armor. Pstrany is the primary model author with some small model refinement and additions by Captain Kurt as the model was collaborated on during development. Captain Kurt created the textures for each, the 2D instrument panel, the individual .dp files, air files and aircraft.cfg files.

Messerschmitt Bf 109E-7 by Design Team Daedalus Unit: 3./JG1 De Kooy, Holland 1941 Pilot: Hans Schubert (rank unknown) Following the E-4, the E-7 was the next major production variant, entering service and seeing combat at the end of August 1940. One of the limitations of the earlier Bf 109Es was their short range of 660 km (410 mi) and limited endurance, as the design was originally conceived as a short-range interceptor. The E-7 rectified this problem as it was the first Bf 109 subtype to be able to carry a drop tank, usually the standardized Luftwaffe 300 L (79 US gal) capacity unit mounted on a centre-line rack under the fuselage, which increased its range to 1,325 km (820 mi). Fuel from the drop tank was pumped to the internal fuel tank via a large fuel line that ran up and along the inside starboard wall of the cockpit, with a clear sight glass located in the fuel line's main span so the pilot could easily see the flow of fuel and know when the tank was empty. Alternatively, a bomb could be fitted and the E-7 could be used as a Jabo fighter-bomber. Previous Emil subtypes were progressively retrofitted with the necessary fittings for carrying a drop tank from October 1940. Early E-7s were fitted with the 1,100 PS DB 601A or 1,175 PS DB 601Aa engine, while late-production ones received 1,175 PS DB 601N engines with improved altitude performance the latter was designated as E-7/N. A total of 438 E-7s of all variants were built. There were many small differences between individual E-7s because the E-7 was often modified in the field by groundcrew and rear area repair depots. The production standard had no pilot armor. Mods included types of pilot head armor, armored windscreen, tropical sand filters, etc. So each model we have created has its own unique features. This aircraft was unmodified and had no pilot head armor. Pstrany is the primary model author with some small model refinement and additions by Captain Kurt as the model was collaborated on during development. Captain Kurt created the textures for each, the 2D instrument panel, the individual .dp files, air files and aircraft.cfg files.

Messerschmitt Bf 109T-2 by Design Team Daedalus Unit: JGr. Drontheim, Trondheim-Vaernes, Norway Summer 1941 Pilot: unknown The Bf 109T was based on the E-7 and designed as an aircraft carrier fighter intended to serve on Germany's then under construction carrier, the Graf Zeppelin. The wing span was increased to 36 feet, 4.22 inches, a small spoiler was added to the top of the wings, and added an arrestor hook and catapult fittings. An order for 70 was placed with Fieseler with construction fully underway in April 1941. When construction of the Graf Zeppelin was cancelled, the remaining 63 of 70 T-1s were built as T-2s with the carrier equipment either removed, or inactivated like the wing top spoilers. Some of the T-1s may have been converted to T-2 standard. It was found that the flight performance of the T-2 was closely comparable to the E-4/N. Because of its ability to take off and land in shorter distances, 42 T-2s were assigned to I/JG.77 and 21 T-2s were assigned to Jagdgruppe Drondheim in June 1941, both units being deployed in Norway on landing strips which were both short and subject to frequent, powerful cross-winds. In April and May 1943 a few remaining T-2s were operational with 12 assigned to Jagdstaffel Helgoland (subordinated to JG 11) and 10 were with JG300 as night fighters. a few others were scattered around with training units. With a production run of only 70 units the planes were fairly standardized, but field modifications did exist on some planes. So each model we have created has its own unique features. This aircraft was equipped with a flat plate plus curved top pilot head armor and had an add-on armored glass windscreen. Pstrany is the primary model author with small model refinements and additions by Captain Kurt as the model was collaborated on during development. Captain Kurt created the textures for each, the 2D instrument panel, the individual .dp files, air files and aircraft.cfg files.

Messerschmitt Bf 109T-2 by Design Team Daedalus Unit: 3./JG77 Herdla, Norway 1941 Pilot: Lt Alfred Jakobi The Bf 109T was based on the E-7 and designed as an aircraft carrier fighter intended to serve on Germany's then under construction carrier, the Graf Zeppelin. The wing span was increased to 36 feet, 4.22 inches, a small spoiler was added to the top of the wings, and added an arrestor hook and catapult fittings. An order for 70 was placed with Fieseler with construction fully underway in April 1941. When construction of the Graf Zeppelin was cancelled, the remaining 63 of 70 T-1s were built as T-2s with the carrier equipment either removed, or inactivated like the wing top spoilers. Some of the T-1s may have been converted to T-2 standard. It was found that the flight performance of the T-2 was closely comparable to the E-4/N. Because of its ability to take off and land in shorter distances, 42 T-2s were assigned to I/JG.77 and 21 T-2s were assigned to Jagdgruppe Drondheim in June 1941, both units being deployed in Norway on landing strips which were both short and subject to frequent, powerful cross-winds. In April and May 1943 a few remaining T-2s were operational with 12 assigned to Jagdstaffel Helgoland (subordinated to JG 11) and 10 were with JG300 as night fighters. a few others were scattered around with training units. With a production run of only 70 units the planes were fairly standardized, but field modifications did exist on some planes. So each model we have created has its own unique features. This aircraft was not equipped with any pilot head armor and had a FuG25 raio set installed at one point. Pstrany is the primary model author with small model refinements and additions by Captain Kurt as the model was collaborated on during development. Captain Kurt created the textures for each, the 2D instrument panel, the individual .dp files, air files and aircraft.cfg files.

Messerschmitt Bf 109T-2 by Design Team Daedalus Unit: 2./JG77 Lister, Norway 1941 Pilot: unknown The Bf 109T was based on the E-7 and designed as an aircraft carrier fighter intended to serve on Germany's then under construction carrier, the Graf Zeppelin. The wing span was increased to 36 feet, 4.22 inches, a small spoiler was added to the top of the wings, and added an arrestor hook and catapult fittings. An order for 70 was placed with Fieseler with construction fully underway in April 1941. When construction of the Graf Zeppelin was cancelled, the remaining 63 of 70 T-1s were built as T-2s with the carrier equipment either removed, or inactivated like the wing top spoilers. Some of the T-1s may have been converted to T-2 standard. It was found that the flight performance of the T-2 was closely comparable to the E-4/N. Because of its ability to take off and land in shorter distances, 42 T-2s were assigned to I/JG.77 and 21 T-2s were assigned to Jagdgruppe Drondheim in June 1941, both units being deployed in Norway on landing strips which were both short and subject to frequent, powerful cross-winds. In April and May 1943 a few remaining T-2s were operational with 12 assigned to Jagdstaffel Helgoland (subordinated to JG 11) and 10 were with JG300 as night fighters. a few others were scattered around with training units. With a production run of only 70 units the planes were fairly standardized, but field modifications did exist on some planes. So each model we have created has its own unique features. This aircraft was equipped with a flat plate plus curved top pilot head armor. Pstrany is the primary model author with small model refinements and additions by Captain Kurt as the model was collaborated on during development. Captain Kurt created the textures for each, the 2D instrument panel, the individual .dp files, air files and aircraft.cfg files.