FSX Airspeed Horsa Glider.The Horsa glider was used by the RAF in it's WW2 airborne operations. It was bigger than the American Waco CG-4 and carried 30 troops vs. the Waco's 15. This is a FSDS v3.51 project compiled with Xtomdl into FSX (SP-2). It has the usual animations plus opening door, steps and tail cone. The 2D panel and VC are based on a picture and the VC has animated controls. A Low Definition model of a Handley Page Halifax is included for use as a glider tug. Instructions are included to make the Halifax the default tow plane. By Paul Clawson. 1MB

FSX (SP2 Tested) 1917 Zepplin Staaken R.VI This aircraft was mainly used for night bombing raids on London. The plane had enclosed crew cabins and the engines could be worked on during flight.Engines: 2x Daimler Mercedes D.IVa, 260 Wing Span: 18.4 m (60 ft 4 in Cruising Speed: 145 km/h (90 mph) Max Speed: 165 km/h (103 mph) Rate of Climb: 1,000 m (3,280 ft)/5 min Model by Stuart Green Pesented by the Nor-Cal Prop Club. 4.7MB

FSX Antoinette Type VII Monoplane Package. This aircraft has been considered by many to be the most beautiful aeroplane of the period. Few Antoinette Monoplanes were built, but one, owned and flown by Hubert Latham, a master of the type from England, made a number of famous flights in the U.S., including one across the Golden Gate and over the cities of San Francisco, Antoinette by Joe BinkaThis file is proudly presented by the Nor-Cal Prop Club . 8.2MB

FSX Albatross DIII Package. Full Vc Custom sound Great texture One of the next generation of German fighters, the Albatross D.III and its predecessor the Albatross D.II combined to inflict heavy losses on the Allies in April 1917. Known as "Bloody April," German aircraft outclassed their opposition and dominated the skies over the Western Front. Model by Stuart Green. This file is proudly presented by the Nor-Cal Prop Club . 8.2MB

FSX Sopwith Snipe Package. Full VC, custom sound & great textures. Considered by many to be the best Allied fighter in service at the end of World War I, the Sopwith 7F.1 Snipe was designed by Herbert Smith to replace the aging Sopwith Camel. Custom built around the powerful 230 hp Bentley BR2 engine, the Snipe wasn't much faster than the Camel but it was easier to fly, offered better visibility from the cockpit and had an improved rate of climb. Model by Stuart GreenThis file is proudly presented by the Nor-Cal Prop Club . 8.2MB

FSX 1915 Caudron G4 Twin Rotary engine Package (fixed). Just probrably the most beautiful vintage plane for fsx! A must have for vintage aviation fans The Caudron G.3 first flew in 1914 serving as an observation aircraft. It had above average climbing ability and was considered suitable for use in mountainous terrain. As the progressed the type was retired from front line service and used extensively as a training aircraft. The USAS procured 192 of them for use as trainers. The first 126 were purchased with Le Rhone 9C engines in November of 1917. The Remaining 66 were delivered with Anzani 10 engines beginning in April 1918. Model by Stuart Green airfile by James Banks This file is proudly presented by the Nor-Cal Prop Club . 8.2MB

FSX Bristol Beaufighter SAAF Textures only. This is a repaint of Dave Garwood's fantastic Bristol Beaufighter (available here) utilizing his paint kit. Many thanks to Dave Garwood for the fantastic model, sounds and VC, and also the members of CBFsim.org for their help. Textures only. Repainted by Sean Kneppers. 3MB

FSX 1938 Waterman Arrowbile by Rarewings.com: Designed with FSDS3.5.1 and FSTweak. Has full working virtual cockpit with back-lite gauges. 2-D panels, custom sounds. Reflective metal and glass textures. Waterman, Figuring that most people couldn’t afford both an airplane and a car, and believing that the car was a necessity of modern life, Waterman set out to build a car that could be turned into an airplane. The result was the “Arrowbile,” a small plane with wings that could be detached in a few minutes. Much of the vehicle was made with standard car parts, and in fact a normal Studebaker engine powered the wheels (when in car mode) and the propeller (when in airplane mode). Free download from www.rarewings.com. 11.5MB

FSX RWD-8pws, a Polish basic training aircraft used before WW2. FSX-native model, 11 paint schemes, paint kit in the PSD format. Original 3D model by Piotr Mika, additional 3D modelling, gauges, FSX animations by Michal Puto, flight dynamics and 2D textures by Lukasz Kubacki, additional gauge by Robert Rogalski. 40MB

FSX clean glass textures for FS2004 Junkers 52/3m (Version 2). Requires the model by by O. Fischer here. Dan Vukmanich. 481K