FSX/P3D Nordica and Estonian Bombardier CRJ-900 package -------------- Featuring 2 liveries (Estonian and Nordica) for the aircraft registered ES-ACB. Nordica is the successor of the Estonian national airline Estonian Air. Project Opensky CRJ-900 2020 FSX native model and VC conversion made by Speedbird77. Nordica textures by Chris Evans. --- My Facebook page: https://www.facebook.com/AzureFire-107137807723412 ----- I will post videos about my repaints at my YouTube channel: https://www.youtube.com/channel/UC0Gidgoo7rWZlStYyTroMqw

FSX Native MiG-29K 'Sea Fulcrum', model by IRIS simulations. Assignments unchanged from FS9, otherwise, FSX native materials and whatnot. Only did the single 'clean' model - the stores did not look so good. Hey, the price is right, looks great, super FPS, loads of fun.

FSX Native McD F-15C/D Eagle, model by IRIS Simulations. Hopefully, as this is unsupported freeware, and I've failed dismally at finding a contact, a native update won't cause distress. FSX standard materials, animations and tags, it's all working except for the inlet schedule, which I had to bodge a bit-see read me for details Clean 'C' and 'D', a Counter-air(2 tanks/6 'raams/2 -9L's/ALQ-184) C, a Combat trainer 'D' (2 tanks/-9/-120 acquisition rounds) I did a bit of a rebuild on the combat 'C', it was missing it's fuselage corner stores racks. Those are in place now.

The largest wooden airplane ever constructed, and flown only one time, the Spruce Goose represents one of humanity's greatest attempts to conquer the skies. It was born out of a need to move troops and material across the Atlantic Ocean, where in 1942, German submarines were sinking hundreds of Allied ships. Henry Kaiser, steel magnate and shipbuilder, conceived the idea of a massive flying transport and turned to Howard Hughes to design and build it. Hughes took on the task, made even more challenging by the government’s restrictions on materials critical to the war effort, such as steel and aluminum. Six times larger than any aircraft of its time, the Spruce Goose, also known as the Hughes Flying Boat, is made entirely of wood. A long time ago, I did a CFS 2 conversion for an earlier Spruce Goose model by Dennis Simanaitis released in 2004. Unhappily, the converted plane goes too low at water and I never uploaded it, but it flies well. I stored it hoping someone could build a better plane. When Erwin Welker released his new work, I simply made a last revision at the airfile and prepare a good DP, based on the BV238, to get a tested product.

Here is the C-17 Globemaster with the working cockpit of the 747, this addon was made by UKMILL for FSX and converted to MSFS2020. Permission to upload this file was obtained by UKMILL and was granted to us. This Item will be updated and improved once in a while but will have less updates than the ATR. To install this addon you will need to drag and drop it into your MSFS community folder. Anyone who wants to make liveries is more than welcome to. This Addon is a Work in progress and still needs a lot of work on it. Some of the issues on this aircraft are that the gear is half sunken into the ground, some of the lights do not work, the physics, aerodynamics and Weight and Balance are all based off the 747. Cfg by Capt22

Here is the Dash8-Q400 with the working cockpit addonof the CJ4, this addon was released for FSX and converted to MSFS2020, Permission to publish this file was granted to us. This item will be updated and improved constantly. To install this addon you will need to drag and drop these files in your MSFS community folder. Anyone who wants to make liveries is more than welcome to. This aircraft is a Work in Progress and it is stillunder development and needs soem work. Some issues are that props appear almost invisible, Landing Lights and Taxi Lights do not work, and Physics are off and need a lot of work. If there are anymore issues feel free to send me a chat or comment down below. Enjoy! Capt22

FSX/FS2004 Spitfire Mk XIV clipped: The Mk XIV was the most important of the Griffon powered Spitfires, and the only one to see significant wartime service. It used the two-speed two-stage supercharged Griffon 61 or 65, giving 2,050 hp. It had a significantly improved performance at speed and higher altitudes when compared to the earlier Merlin powered Spitfires . Model by A.F.Scrub

FSX/Acceleration/FS2004 Extension Pack for Porsche 911 Targa 4s, type 991 from 2014-18 with effect upgrades. The Targa is the model with convertable rooftop which is realisticly and detailed animated. The extension pack comes now in five colours plus new switches and effects. This package includes 2D panels and can be used as replacement for the previous package. The model is easy to repaint because most of the parts are in uni color as glossy alpha channel. The gauges, effects and additional colours are made by J.P. Carosine. The FSDS 3.5 model with VC is made by Erwin Welker.

FSX/P3D Bombardier CRJ-900 FSX Native Air Nostrum package. Air Nostrum,also known as Iberia Regional, is a Spanish regional airline and a division of Iberia and has it's main hubs at Barcelona Airport and Madrid-Barajas Airport. Currently Air Nostrum have 4 CRJ900 in it's fleet. Project Opensky CRJ-900 2020 FSX native model and VC conversion by Speedbird77. Models by Nicholas Wilkinson/Hiroshi Igami Project Opensky. Flight dynamics Warren C. Daniel. FSX and Prepar3D v5 (and previous) compatible MdlX conversions by Speedbird77. Textured and tested in P3D v5 by Chris Evans. Should also work in FSX and other P3D versions.

This is just a little set of gauges in XML which replace the old BoeingGeneric.dll gauges. They fit exactly in any position where the BoeingGeneric gauges are used. As they written in XML they can easily be modified and the background colours can be easily changed. Numbers are more easily legible and rotating them is easier. Other than that it works in exactly the same way. It works in FSX 2D and VC panels and should work in FS9 as well.