13.36Mb (410 downloads)
Blue Islands currently operates an all ATR fleet, however they previously operated the BN2 Islander on short passenger routes. This package depicts a BN2 Islander in the new Blue Islands livery. Model by Marcel Kuhnt. Features Garmin G5 instruments by Bob Kellog. Painted and Packaged by Dbob.
Posted May 28, 2024 18:14 by Dbob
12.84Mb (443 downloads)
In real life, G-TEMP is A Piper Cherokee E. However, there is no good-quality Cherokee 180 for FSX, so I have made this livery for the freeware Piper Arrow by CLS. G-TEMP was based at Norwich Airport (EGSH) until December 2023, and hasn't flown much since then. In its final few months at Norwich, I had my first PPL Lesson in MP, so I have tried to make the cockpit resemble that of the real aircraft. This aircraft is a standalone package, so does not require any addons to be installed beforehand. Aircraft by Commercial Level Simulations, with textures by Dbob.
Posted May 5, 2024 10:43 by Dbob
129.45Mb (394 downloads)
Howard 250 Trigear Retextured and Enhanced VC and Cabin. For Prepar3D V4
This is the classic HW250 by Milton Shupe and other contributors.
Credits inside.
The VC and passangers cabin have been retextured (DDs and BMP 32 bits) and corrected the ignition for both engines.
Auto Altimeter, Throttle display, Info Display, Altitude Callouts, V Speeds callouts.
This is the complete aircraft, installation is the usual:
Copy the folder *Howard 250 Trigear* into Prepar3D v4/SimObjects/Airplanes...done!!!
Tested on Prepar3D V4 only. Works OK in FSX.
For the simmers of Simviation.
Juan Carlos Brizuela_Johnny
2024
Posted Apr 29, 2024 05:21 by Juan Carlos Brizuela_Johnny_2024
8.79Mb (60 downloads)
This is a standalone update of my original Norwich Aviation Centre aircraft livery package. Updates include: Colour Adjustments, Under-wing Registrations, G-EEGU Wing overhaul, and a few more corrections. Also, G-BNNO has officially joined NAC's fleet as of today! This addon requires a copy of the Just Flight Flying Club Piper PA28-161 Warrior II to be installed, or else it won't run. Textures by Dbob, with Garmin G5 gauges by Bob Kellogg. You DO NOT require my original package for these to work.
Required files:
required file
Posted Apr 27, 2024 17:03 by Dbob
3.80Mb (125 downloads)
My latest repaint for the Benoit Garaunt Fokker F27.
This time featuring French regional airline TAT from the early 1980's. Although this aircraft was an FH227 I've done my best to make it as visually close as possible to one. A very eye catching scheme from another era that I enjoyed doing very much and hope you do too. Requires the basepack linked below.
Required files:
required file
Posted Apr 23, 2024 13:39 by Alex Rogers
20.12Mb (569 downloads)
FSX/P3d4,5 Piper PA-A-38 Tomahawk.
The Tomahawk is a single-engined low-wing cantilever monoplane with a T-tail and an enclosed cabin for two. It has a fixed tricycle landing gear and is powered by a Lycoming O-235 four-cylinder piston engine with a twin-bladed tractor propeller. Upgrade to Native FSX/P3D4,5 by A.F.Scub
Posted Apr 18, 2024 16:17 by A.F.Scrub
280.10Mb (440 downloads)
This is an update and continued expansion of the FSN AT-802. But it is expanding from the firefighting versions to now representing the single and two-seat versions equipped with agricultural equipment attached to the airframes. The pack includes the spray bar and seed spreader configurations on both the single and two-seat 802s. Between "Scorch00" and myself we've updated a considerable amount of things on the 802. Including a lengthy correcting of proportions of the aircraft, flight dynamics, and updating the aircraft with PBR, expanded night lighting for night spraying operations, and connections to work with Lorby's CropDusterX application. Plus, there are a lot more small additions. The pack includes a slew of repaints put together by myself. This is the FSX version. Scorch00 uploaded the P3Dv4+ capable version separately. Original aircraft by FSN, updated by Nicholas Mitchell "Scorch00" and myself, Eliijah Johnson "Eli."
Posted Apr 13, 2024 16:25 by Eliijah "Eli" Johnson
2.58Mb (184 downloads)
Another in the series of Fokker F27 repaints I'm doing for the fantastic Benoit Gaurant F27-500. This one depicts an Ansett Airlines of NSW aircraft in the "Alpha" scheme for 1970's Ansett. The airline operated a fairly small number of the -500 series F27 but they were not fitted with the large cargo door. I have tried to disguise this as best I can and hope the inaccuracy isn't too distracting! After all you can never have too many F27s. For those who remember enjoy the memories, for those who don't welcome to the glory days of a much loved airline.
Required files:
required file
Posted Apr 1, 2024 13:10 by Alex Rogers
302.31Mb (359 downloads)
7 textures and a NEW painkit for the Fokker F-27 MK500 by Benoit Gaurant. The new white painkit contains numerous modifications to make repaints. read the Reame file to know all the modifications. Requires Benoit Gaurant's Fokker F-27 MK500 model. credits to Benoit Gaurant for the model, DELTA TANGO NINE TWO for the private textures. DO NOT SHARE OUTSIDE SIMVIATION.
Required files:
required file
Posted Mar 24, 2024 17:46 by Delta Tango Nine Two
106.13Mb (413 downloads)
LONG AWAITED IL-8 WITH NIGHT COCKPIT WINDOW TRANSPARENCY FIX
Fixes to Edgar Guinart’s port from the original Russian model included the following:
- Making the plane flyable at night from the 3D panel
- Adding VOR controls from Edgar Guinart’s ALBA IL-18X model
- Fixing the broken VOR OBS control, now both course and direction indication works
- Installing a more authentic autopilot panel (from AN12). The original autopilot is kept in one of the unused windows If someone prefers to install that one, even though its rather flaky and lacks full functionality.
- Adding the engine start 2D panel from Edgar Guinart’s ALBA IL-18 model
- Fixing the stuck mouse acceleration issue caused by one of the BI panel switches which made 1 degree increments impossible. To get times 10 click acceleration now use right mouse key clicks on the VOR and Autopilot panels.
- Aligning engine smoke with the engine exhausts
- Moving the Pilot panel to its traditional place. Use the standard F10 and F9 keys to select the 2D/3D cockpit views
Read the included Word Doc please.
Posted Feb 24, 2024 20:12 by Arpad Polan