1.49Mb (1342 downloads)
CFS2
Blackburn B.26 Botha.
The Botha was a British Reconaissance/Torpedo Plane that entered servive
in May 1940. Severely underpowered, the Botha proved unsuitable for
its designed role and therefore only has a 5 month operational career.
It survived as a trainer until 1944. The Botha is often listed as
one of the worst aircraft of all time. Credits: The model, dp and
textures are by William Dickens The Flight airfile is by Peperez The
Textures are freeware collected or made by W. Dickens. 2D Panel is
a Freeware A-26 Panel by Paolo Kromberg Propeller Textures masterfully
done by Kelticheart. 1.5MB
Posted Sep 19, 2007 08:52 by archive
2.04Mb (1478 downloads)
CFS2
Consolidated B-32 Dominator.
A heavy bomber made for United States Army Air Forces during the Second
World War, and has the distinction of being the last Allied aircraft
to be engaged in combat during WWII. Developed in parallel with the
B-29 Superfortress as a fallback design should the Superfortress prove
unsuccessful, it only reached units in the Pacific during the summer
of 1945, and thus saw only a very few combat operations against Japanese
targets before the atomic bombs used on Hiroshima and Nagasaki ended
the war. The model is by William Dickens The Flight airfile and dp
are by Peperez The Textures are freeware collected or made by W. Dickens.
Panel is converted from FS9 C130 panel with no listed author. 2.1MB
Posted Sep 19, 2007 08:52 by archive
5.94Mb (2199 downloads)
CFS2/FS2002/FS2004
Breguet Bre.695.
Slight model changes to nose to give the breguet a more bird like
nose and engine change FSDSv2.x Model, air file, Aircaft.config, Panel,
Textures., Scenedb and Object_dp, by Jim Jacobson This is just a minor
change to my Breguet 693. 6.1MB
Posted Sep 19, 2007 08:52 by archive
0.69Mb (946 downloads)
CFS2
PV-2 Harpoon USN.
A development of the PV-1 Ventura, the PV-2 Harpoon featured greater
wing span, and the ability to carry a 4000 lb bomb load. Entering
service in 1944 the Harpoon, 535 were produced and served as effective
sub hunters. Some PV-2 Harpoons remained in service with allied countires
as late as 1970. Original by Alphasim. 705K
Posted Sep 19, 2007 08:52 by archive
3.38Mb (2227 downloads)
CFS2
Focke-Wulf FW 187A-0 Falke.
First designed in 1935 by Kurt Tank with absolutely no official requirement,
the initial design performance calculations showed a potential speed
of 348 mph (560 kmh) using 860 hp Daimler-Benz DB 600 engines. The
initial batch of three pre-production Fw 187A-0 fighters were completed
in the summer of 1939 with a rear facing radio/gunner position, and
had 700 hp Jumo 210Ga engines. The armament consisted of two 0.787
in (20 mm) MG FF cannons and four 0.312 in (7.92 mm) MG 17 machine
guns. The design was never adopted by the Luftwaffe and they fought
the war with the arguably inferior bf110 and its successor, the Me210/410
series. The model is made by William Dickens The airfile and dp are
by Christian Nölte The Textures by Willaim Dickens New Panel by Joachim
Schmidt. 3.4MB
Posted Sep 19, 2007 08:52 by archive
0.83Mb (1250 downloads)
CFS2
Vultee V-11GB.
The Vultee V-11 was a military version of Gerard Vultee's single-engine
passenger transport V-1A, with which it shared the wing, the tail
surfaces and the undercarriage. Designed as an attack bomber, it was
a low-wing, all-metal design with an elongated, four-section canopy
covering its two tandem-seated crew members. A dedicated attack bomber
version was developed as V-11GB, and provided room for a third crew
member-a cameraman cum bomb aimer who would also operate an additional
retractable .30-inch machine gun placed on a trapdoor on the bottom
of the aft fuselage. The wings now had a pair of .30-inch guns on
each side. The estimated bombload was of 1,000 lbs. on internal racks
over a range of 2,400 miles. Note to user: The trap door gun is operated
by the "tailhook" command. If you hit shift+H on the keyboard the
gun will deploy or retract. It will still fire regardless of its current
position. Credits: The model is made by William Dickens The textures
are by William Dickens The airfile and .dp are by Peperez The panel
.bmp is by Phil Perrot. 846K
Posted Sep 19, 2007 08:52 by archive

2.02Mb (852 downloads)
Polish
fighter PZL P-11c for CFS2 only. Features: -Historically accurate
markings -Dynamic virtual cockpit -1% AIR file -and the usual goodies
Credits: AIR file by gregoryp using the 1% formula Prop bitmaps (prop.bmp
and prop2.bmp) by Robert Reichert and Andrew Wai, modified by Eric
MDL, panel, other textures, DP, and the rest by Eric of AOL. Custom
sounds here.2MB
Posted Sep 19, 2007 08:52 by archive

2.49Mb (938 downloads)
Polish
observation aircraft LWS/RWD-14b Czapla for CFS2 only. Features:
-Historically accurate markings -Panel, and all the normal CFS2 goodies
Credits: AIR file/notes/checklist by FSAviator Prop bitmaps (prop.bmp
and prop2.bmp) by Robert Reichert and Andrew Wai, modified by Eric
MDL,other textures, DP, and the rest by Eric of AOL Panel originally
by Michel Polski, modified to better fit a Czapla by FSAviator Aircraft
uses stock sounds from the Zero, but a separate sound package fitting
this aircraft is downloadable from here. 2.5MB
Posted Sep 19, 2007 08:52 by archive

3.77Mb (1420 downloads)
Polish
PZL P-23a & b Karas (2 aircraft) for CFS2 only This package
contains both the trainer/reconnaisance version (PZL P-23a), and the
bomber version (PZL P-23b) Please consult the separate readme.txt
files with each aircraft for more info. Eric of AOL. 3.8MB
Posted Sep 19, 2007 08:52 by archive

0.93Mb (1120 downloads)
CFS
spitfire XIVc-D : see enclosed readme especially for panel.
Model, flight model, moving parts, textures, mission : Paul Rebuffat
original AFX : John Cooper (spitfire IX RCAF) sounds : RALPH PEGRAM.
976K
Posted Sep 19, 2007 08:52 by archive