3.38Mb (2276 downloads)
CFS2
Focke-Wulf FW 187A-0 Falke.
First designed in 1935 by Kurt Tank with absolutely no official requirement,
the initial design performance calculations showed a potential speed
of 348 mph (560 kmh) using 860 hp Daimler-Benz DB 600 engines. The
initial batch of three pre-production Fw 187A-0 fighters were completed
in the summer of 1939 with a rear facing radio/gunner position, and
had 700 hp Jumo 210Ga engines. The armament consisted of two 0.787
in (20 mm) MG FF cannons and four 0.312 in (7.92 mm) MG 17 machine
guns. The design was never adopted by the Luftwaffe and they fought
the war with the arguably inferior bf110 and its successor, the Me210/410
series. The model is made by William Dickens The airfile and dp are
by Christian Nölte The Textures by Willaim Dickens New Panel by Joachim
Schmidt. 3.4MB
Posted Sep 19, 2007 08:52 by archive
0.83Mb (1291 downloads)
CFS2
Vultee V-11GB.
The Vultee V-11 was a military version of Gerard Vultee's single-engine
passenger transport V-1A, with which it shared the wing, the tail
surfaces and the undercarriage. Designed as an attack bomber, it was
a low-wing, all-metal design with an elongated, four-section canopy
covering its two tandem-seated crew members. A dedicated attack bomber
version was developed as V-11GB, and provided room for a third crew
member-a cameraman cum bomb aimer who would also operate an additional
retractable .30-inch machine gun placed on a trapdoor on the bottom
of the aft fuselage. The wings now had a pair of .30-inch guns on
each side. The estimated bombload was of 1,000 lbs. on internal racks
over a range of 2,400 miles. Note to user: The trap door gun is operated
by the "tailhook" command. If you hit shift+H on the keyboard the
gun will deploy or retract. It will still fire regardless of its current
position. Credits: The model is made by William Dickens The textures
are by William Dickens The airfile and .dp are by Peperez The panel
.bmp is by Phil Perrot. 846K
Posted Sep 19, 2007 08:52 by archive

2.02Mb (902 downloads)
Polish
fighter PZL P-11c for CFS2 only. Features: -Historically accurate
markings -Dynamic virtual cockpit -1% AIR file -and the usual goodies
Credits: AIR file by gregoryp using the 1% formula Prop bitmaps (prop.bmp
and prop2.bmp) by Robert Reichert and Andrew Wai, modified by Eric
MDL, panel, other textures, DP, and the rest by Eric of AOL. Custom
sounds here.2MB
Posted Sep 19, 2007 08:52 by archive

2.49Mb (983 downloads)
Polish
observation aircraft LWS/RWD-14b Czapla for CFS2 only. Features:
-Historically accurate markings -Panel, and all the normal CFS2 goodies
Credits: AIR file/notes/checklist by FSAviator Prop bitmaps (prop.bmp
and prop2.bmp) by Robert Reichert and Andrew Wai, modified by Eric
MDL,other textures, DP, and the rest by Eric of AOL Panel originally
by Michel Polski, modified to better fit a Czapla by FSAviator Aircraft
uses stock sounds from the Zero, but a separate sound package fitting
this aircraft is downloadable from here. 2.5MB
Posted Sep 19, 2007 08:52 by archive

3.77Mb (1467 downloads)
Polish
PZL P-23a & b Karas (2 aircraft) for CFS2 only This package
contains both the trainer/reconnaisance version (PZL P-23a), and the
bomber version (PZL P-23b) Please consult the separate readme.txt
files with each aircraft for more info. Eric of AOL. 3.8MB
Posted Sep 19, 2007 08:52 by archive

0.93Mb (1151 downloads)
CFS
spitfire XIVc-D : see enclosed readme especially for panel.
Model, flight model, moving parts, textures, mission : Paul Rebuffat
original AFX : John Cooper (spitfire IX RCAF) sounds : RALPH PEGRAM.
976K
Posted Sep 19, 2007 08:52 by archive

4.00Mb (1135 downloads)
CFS2
Lavochkin La5-FN "White 93" Flown by Snr Lt V Orekhov, 32.Gv.IAP,
3 Gv.IAD, 1 Gv.IAK, Kursk, July 1943 and Winter sheme For CFS2 only
Freeware version The La-5 entered service in 1942. In its developed
La-5FN version it was superior to the German fighters at low and medium
altitudes.Its disadvantages were primitive equipment, a bounce-inducing
undercarriage, and in the early stages very poor production quality.
9,920 were built. This plane is Copyrighted by the DAG (designers
Alliance Group) and specially for the : Airfiles : Lee Boyer Damage
profiles : Stephane Lehuede (Tubs) Data research : Eric (cfsfrance)
Panel : Claudio Dillulo Textures : Alain Coupet (_Ugly_Ducky_) Visual
model (plane/payload) : Alain Coupet Virtual Panel : Alain Coupet
DAG production.. 4.2MB
Posted Sep 19, 2007 08:52 by archive
0.15Mb (580 downloads)
Repaint
of the Sopwith Camel From FS2000. You must have the default
Camel from FS 2000 to work. Just extract to the Sopwith Camel Texture
folder. Repaint by me. Joseph H. Nageotte. A.K.A. Musicman. 152K
Posted Sep 19, 2007 08:52 by archive

0.40Mb (1322 downloads)
CFS2
Black Maria Sopwith. TriplaneThis is a repaint, a totally
new, realistic CFS2 flight model, an reworked panel, and a native
CFS2 damage profile file for Andy Hall's original Black Maria Sopwith
Triplane of WWI fame. The repaint is of Black Roger from the Royal
Navy's famed Sopwith Triplane squadron. FREEWARE by Steve "Humbug"
Baugh. 412K
Posted Sep 19, 2007 08:52 by archive

1.87Mb (1894 downloads)
CFS2
He162 Salamender German WWII fighter. Moving parts,Multi model
resolution. Smoke effect included. Original Air file by John Bulteel
and Rob Fry, palen by shina Texture, DP, Visual model by Frenchee
Frederic Martenot. 2MB
Posted Sep 19, 2007 08:52 by archive