Version 2 update Mav has worked his SCASM magic to eliminate the Virtual Cockpit flickering and malfunctioning aileron edges. This is the replacement model file only. You will need the original complete Nieuport 28C1 file(s) below for a complete aircraft.

Ted Cook's Hawker Fury II is a nice plane for FS2004. Shessi also made a nice CFS2 version. This is a replacement 2d panel. More CFS2/FS2004 stuff at Google Drive: https://drive.google.com/drive/folders/0B6eE9NtAJBP6aTMxclRjb2txY0E

The Nieuport 28 C.1, America’s First Fighter for CFS2 The Nieuport 28 C.1 was developed in France but was America's first fighter aircraft. It entered service in March 1918. France originally ordered it into production in 1917 only to cancel the order shortly thereafter in favor of the SPAD XIII as the standard French fighter. It was given a new lease on life when the United States Air Service (USAS) ordered 297 of them as it was available when the SPAD XIII could not be procured due to the SPAD production commitment to the French Air Force. It was intended as a stop gap fighter until enough SPAD XIII's became available. Deliveries - without guns - to the USAS 94th and 95th Aero Squadrons began in February and March 1918. By the end of March a limited number of Vickers machine guns were delivered to the 94th for combat patrols to begin. In June, the 27th and 147th Aero Squadrons were also equipped with the Nieuport 28. The Nieuport 28 in combat proved to have outstanding maneuverability and rate of climb with decent speed, but had a weakness on the upper wing where the leading edge could fail, tearing the upper wing fabric off with it when it was pulled out of a high speed dive. This led to a number of incidents in combat causing losses. Some pilots were able to limp back to base with the damage, like Waldo Heinrichs, Jimmy Meissner, and Eddie Rickenbacker, but others were not so lucky. This led to more cautious flying by the pilots and probably hindered the overall combat performance of the Squadrons. Even so, the USAS fighter squadrons turned in an acceptable record with the Nieuport for the four months they flew it in combat until SPADS became available to replace the Nieuports beginning in August, 1918. FSDS 2.24 Model, textures, and flight files by Captain Kurt (Kurt Schwabauer), freeware pilot figure source file by Wolfi – modified by Captain Kurt, and prop spinning texture by Kelticheart.

The Nieuport 28 C.1, America’s First Fighter for CFS2 The Nieuport 28 C.1 was developed in France but was America's first fighter aircraft. It entered service in March 1918. France originally ordered it into production in 1917 only to cancel the order shortly thereafter in favor of the SPAD XIII as the standard French fighter. It was given a new lease on life when the United States Air Service (USAS) ordered 297 of them as it was available when the SPAD XIII could not be procured due to the SPAD production commitment to the French Air Force. It was intended as a stop gap fighter until enough SPAD XIII's became available. Deliveries - without guns - to the USAS 94th and 95th Aero Squadrons began in February and March 1918. By the end of March a limited number of Vickers machine guns were delivered to the 94th for combat patrols to begin. In June, the 27th and 147th Aero Squadrons were also equipped with the Nieuport 28. The Nieuport 28 in combat proved to have outstanding maneuverability and rate of climb with decent speed, but had a weakness on the upper wing where the leading edge could fail, tearing the upper wing fabric off with it when it was pulled out of a high speed dive. This led to a number of incidents in combat causing losses. Some pilots were able to limp back to base with the damage, like Waldo Heinrichs, Jimmy Meissner, and Eddie Rickenbacker, but others were not so lucky. This led to more cautious flying by the pilots and probably hindered the overall combat performance of the Squadrons. Even so, the USAS fighter squadrons turned in an acceptable record with the Nieuport for the four months they flew it in combat until SPADS became available to replace the Nieuports beginning in August, 1918. FSDS 2.24 Model, textures, and flight files by Captain Kurt (Kurt Schwabauer), freeware pilot figure source file by Wolfi – modified by Captain Kurt, and prop spinning texture by Kelticheart.

The Nieuport 28 C.1, America’s First Fighter for CFS2 The Nieuport 28 C.1 was developed in France but was America's first fighter aircraft. It entered service in March 1918. France originally ordered it into production in 1917 only to cancel the order shortly thereafter in favor of the SPAD XIII as the standard French fighter. It was given a new lease on life when the United States Air Service (USAS) ordered 297 of them as it was available when the SPAD XIII could not be procured due to the SPAD production commitment to the French Air Force. It was intended as a stop gap fighter until enough SPAD XIII's became available. Deliveries - without guns - to the USAS 94th and 95th Aero Squadrons began in February and March 1918. By the end of March a limited number of Vickers machine guns were delivered to the 94th for combat patrols to begin. In June, the 27th and 147th Aero Squadrons were also equipped with the Nieuport 28. The Nieuport 28 in combat proved to have outstanding maneuverability and rate of climb with decent speed, but had a weakness on the upper wing where the leading edge could fail, tearing the upper wing fabric off with it when it was pulled out of a high speed dive. This led to a number of incidents in combat causing losses. Some pilots were able to limp back to base with the damage, like Waldo Heinrichs, Jimmy Meissner, and Eddie Rickenbacker, but others were not so lucky. This led to more cautious flying by the pilots and probably hindered the overall combat performance of the Squadrons. Even so, the USAS fighter squadrons turned in an acceptable record with the Nieuport for the four months they flew it in combat until SPADS became available to replace the Nieuports beginning in August, 1918. FSDS 2.24 Model, textures, and flight files by Captain Kurt (Kurt Schwabauer), freeware pilot figure source file by Wolfi – modified by Captain Kurt, and prop spinning texture by Kelticheart.

The Nieuport 28 C.1, America’s First Fighter for CFS2 The Nieuport 28 C.1 was developed in France but was America's first fighter aircraft. It entered service in March 1918. France originally ordered it into production in 1917 only to cancel the order shortly thereafter in favor of the SPAD XIII as the standard French fighter. It was given a new lease on life when the United States Air Service (USAS) ordered 297 of them as it was available when the SPAD XIII could not be procured due to the SPAD production commitment to the French Air Force. It was intended as a stop gap fighter until enough SPAD XIII's became available. Deliveries - without guns - to the USAS 94th and 95th Aero Squadrons began in February and March 1918. By the end of March a limited number of Vickers machine guns were delivered to the 94th for combat patrols to begin. In June, the 27th and 147th Aero Squadrons were also equipped with the Nieuport 28. The Nieuport 28 in combat proved to have outstanding maneuverability and rate of climb with decent speed, but had a weakness on the upper wing where the leading edge could fail, tearing the upper wing fabric off with it when it was pulled out of a high speed dive. This led to a number of incidents in combat causing losses. Some pilots were able to limp back to base with the damage, like Waldo Heinrichs, Jimmy Meissner, and Eddie Rickenbacker, but others were not so lucky. This led to more cautious flying by the pilots and probably hindered the overall combat performance of the Squadrons. Even so, the USAS fighter squadrons turned in an acceptable record with the Nieuport for the four months they flew it in combat until SPADS became available to replace the Nieuports beginning in August, 1918. FSDS 2.24 Model, textures, and flight files by Captain Kurt (Kurt Schwabauer), freeware pilot figure source file by Wolfi – modified by Captain Kurt, and prop spinning texture by Kelticheart.

Salmson 2A2 WWI French / American reconnaissance biplace, French Escadrille SAL 40, France 1918. The model, textures, panel and air files are by Captain Kurt. The pilot figures were developed from Wolfi's freeware Japanese pilot .fsc source file. The prop spinning texture is by Kelticheart. RIP Kelti, you are still contributing.

Salmson 2A2 WWI French / American reconnaissance biplace, 91st Aero Squadron, USAS American Expeditionary Force, France 1918. The model, textures, panel and air files are by Captain Kurt. The pilot figures were developed from Wolfi's freeware Japanese pilot .fsc source file. The prop spinning texture is by Kelticheart. RIP Kelti, you are still contributing.

Salmson 2A2 WWI French / American reconnaissance biplace, French Escadrille SAL 18, France 1918. The model, textures, panel and air files are by Captain Kurt. The pilot figures were developed from Wolfi's freeware Japanese pilot .fsc source file. The prop spinning texture is by Kelticheart. RIP Kelti, you are still contributing.

Salmson 2A2 WWI French / American reconnaissance biplace, 1st Aero Squadron, USAS American Expeditionary Force, France 1918 The model, textures, panel and air files are by Captain Kurt. The pilot figures were developed from Wolfi's freeware Japanese pilot .fsc source file. The prop spinning texture is by Kelticheart. RIP Kelti, you are still contributing.