FSX ESNO, Örnsköldsvik Airport, Sweden. A regional GA airport with the first remote controlled tower in de world, since October 2014. A revision of the FSX stock airport, made with ADE. Only tested in FSX. Happy landings. Tim van Ringen

FSX LGRD, Rhodos Maritsa Airport, Greece. Revision of the FSX stock airport with photoreal background, made with SBuilder and ADE. Only tested in FSX. LGRD was the main airport for the island of Rhodos until 1977, when LGRP (Rhodos Int. Airport) was openend. It is hosting a SAR helicopter base and is in use by the military. Happy landings. Tim van Ringen

The McDonnell F-4F Phantom II is a two-seater and supersonic fighter capable of long range, all-weather fighter-bomber capabilities as well. It is located in the Federal Republic of Germany still in service. 2d panel but no VC. By Andreas Meyer

FSX CamSim Bombardier CSeries 100 V5L. This model is design for AI traffic only, base from my CSeries 100 ags V5L but without AGS and static displays. Model design and paint by Camil Valiquette.

FSX Native/P3D 3 & 4 Boeing 717-200 Blue 1 package. Blue 1 was a Finnish airlines and operated 5 Boeing 717-200 aircraft. Blue 1 was merged into Cityjet in 2016 The VC is the Alejandro Rojas Lucena/FSND fantastic revised Boeing 737-800 VC model blended with Ken Wiggington's work on the default 737 VC to make it more resemble a 787. This VC model includes Working wipers (right mouse click on switch) with rain effect. Switches for LCD Screens, EICAS, PFD, MFT. Autobrake switch. Opening pilots window. Cabin Lights switch. Realistic FMC. Ground Proximity Warning System (GPWS), More Realistic night VC textures. FMC by Garret Smith. Textures by Eric cantu. Model is not modified in any way. VC added and textures. Fixed wheel sink. See VC docs to get the best out of the FMC. Assembled and prepared and tested for P3D V3 & 4 /FSX by Chris Evans.

McCoy Helicopter Landing Effect v4 for both FSX & P3D v4. This package replaces the default rotor-wash effect for dirt and water, five sets of various sizes are included and can be used in any combination. These effects are individually assigned to a specific helicopter overriding both FSX & P3D's default effects. These effects will not detach and lift off the surface when the aircraft climes above a specific height. Some improvements over v3.4b include the removal of two emitters for better frame rates, adjustments that remove the wind effect appearing in waves, a simplified installation and all emitters have had their scale, velocity, density, offsets and colors adjusted for a more realistic appearance by Vince McCoy, 04/04/2017.

FSX Native/P3D 3 & 4 Boeing 717-200 Hawaiian Pacific package. This is the native SGA Boeing 717 (MD95) converted to FSX Native by Eagle Rotorcraft Simulations from the Eric Cantu/SGA original. As of August 2017 Hawaiian Airlines operate 20 Boeing 717-200 aircraft. The VC is the Alejandro Rojas Lucena/FSND fantastic revised Boeing 737-800 VC model blended with Ken Wiggington's work on the default 737 VC to make it more resemble a 787. This VC model includes Working wipers (right mouse click on switch) with rain effect. Switches for LCD Screens, EICAS, PFD, MFT. Autobrake switch. Opening pilots window. Cabin Lights switch. Realistic FMC. Ground Proximity Warning System (GPWS), More Realistic night VC textures. FMC by Garret Smith. Model is not modified in any way. VC added and textures. Fixed wheel sink. See VC docs to get the best out of the FMC. Assembled and prepared and tested for P3D V3 & 4 /FSX by Chris Evans.

The Coronado was the only 4 engine patrol bomber in US navy service at the outbreak of WW2. I t served very well with it's 5000 mile patrol range. Over 200 were produced and it served into 1942 when it was gradually replaced with the Martin Mariner. This is an FSX panel update for the FS2004 Consolidated PB2Y Coronado Flying Boat by the late Paul Clawson. It features both an entirely new VC and 2D panel. The contact points have been corrected and smoke is included now as well. Thanks to Paul Clawson for the original model. All FSX updates by Michael Pook.

New York City X DEMO features a detailed scenery of New York city in the United States of America, fully compatible with FSX, FSX STEAM, P3D v1/v2/v3/v4 and FSW by Dovetail. A demo version of New York City X is provided. This is a fully functional freeware scenery, perfectly aligned with the full payware version. This ensures no problems with online (VATSIM, IVAO and multiplayer) flying in case some users have the payware scenery and some don't. The demo gives you the most important (largest) downtown buildings with a low quality photoreal ground for Manhattan area, as well as low quality heliports. This scenery add-on features 2500 sq km of terrain with autogen and over 6100 photoreal New York buildings in the city, which is the most populous in the United States and the center of the New York Metropolitan Area, one of the most populous urban agglomerations in the world. The product is equipped with an automatic installer, which means that the scenery will be automatically added to the Flight Simulator Scenery Library. Please uninstall all previous versions of similar sceneries you may have installed before. Please make also sure that no duplicated AFCAD files are installed. Enjoy your virtual flying with Drzewiecki Design!

Washington X DEMO features an extremely detailed scenery of large area of Washington, Dstrict of Columbia, United States, fully compatible with FSX, FSX STEAM, P3D v1/v2/v3/v4 and FSW by Dovetail. With this product you are free to fly to any of 5 airports (KDCA, KCGS, KADW, KVKX, W32) and many heliports in the area, admire some of the world-renowned landmarks like Capitol or Pentagon, or simply pay a visit to The President of the United States. This Demo version of the commercial product is a fully functional freeware scenery, featuring same airport layout as in the full version but with limited 3D objects and low resolution textures. This ensures no problems with online (VATSIM, IVAO and multiplayer) flying in case some users have the payware scenery and some don't. It's equipped with an automatic installer, which means that the scenery will be automatically added to the Flight Simulator Scenery Library. Please uninstall all previous versions of the above-mentioned airports you may have installed before. Please make also sure that no duplicated AFCAD files are installed. Enjoy your virtual flying with Drzewiecki Design! Previous version had 1380 d/l's