FSX/P3Dv3/v4/v5 Spit_ Mk V_Malta blue fix This corrects the right side texture of the Blue Spitfire. Replace the old texture DDS by the new one. Fix by A.F.Scrub

FSX/P3Dv3/v4/v5 Spitfire Mk VbTrop The basic Mk V was a Mk I with the Merlin 45 series engine. After take off from WASP, BR 123 had to turn back to the carrier while the rest of the Spitfires got airborne. This was the first landing of a Spitfire on a carrier deck, which was quite a feat without an arrester hook. In 2005 a flight to Malta was organised in a restored Spit BM597. Historical and restored, native FSX/P3D GMAX models by A.F.Scrub

Designed to Air Ministry Specification 2/44 the Brabazon was, at the time of it's construction, one of the largest aircraft ever built, being sized roughly between the much later Airbus A300 and Boeing 767 airliners. Despite its vast size, the Brabazon was designed to carry a total of only 100 passengers, each one being allocated their own spacious area about the size of the entire interior of a small car. Designed to pre-war airline standards, the 8 Centarus-powered Brabazon was probably at the practical limit for a piston prop-liner, and was deemed un-economic in the post-war climate, with no orders forthcoming. Often considered a failure, the Type 167 more than met it's design specs, was a pleasant, well mannered machine that pioneered fully powered flight controls, gust alleviation systems, electric engine controls, high-pressure hydraulics and advanced construction techniques. 60% of the program cost went into capital improvements at Filton and elsewhere that served the British industry well in the jet-age. The final verdict must be that the aircraft was a completely successful prototype showing what to do, and what not to do. FSX native update of the JBK Brabazon, which features a full interior, a very nice front office you could park a Rolls-Royce in, tight modelling, smooth flight model, a great autopilot and slippery frame rates. A few extra are skins provided. Model by Jens B. Kristensen, with a huge B-Z for allowing me to pillage his superb library.

FSX/P3D ATR42-600 Bahamasair. Bahamasair is based at Lynden Pindling International Airport (Nassau) in the Bahamas and operates flights to the Caribbean and the USA. Bahamasair has 3 ATR42 and another in the pipeline. Model and VC by Virtualcol. Ex payware. Textured and assembled for P3Dv5 and should be ok in FSX and earlier P3D versions by Chris Evans.

FSX/P3D Boeing 787-9 Qatar Airways with FSX Native 787 VC. Qatar's flag carrier airline is based at Doha Hamad International Airport and currently have 7 Boeing 787-9 with a further 23 on order. The high quality Boeing 787-9 from TDS. The VC is the Erik Bender adaption of the X-plane Mariano Gonzalez (MagKnight)'s 787 VC. Cockpit textured lighter grey. TDS high spec. native FSX Boeing 787-9 model. See Document to get the best out of the VC. Textured, assembled and tested in P3D v5 by Chris Evans. Should also work in earlier P3D & FSX.

Western Pacific Airlines began service in 1995 with eight Boeing 737's. They originally flew to Las Angeles, Oklahoma, Phoenix, and Las Vegas. Several other destinations in the United States were rapidly added. An interesting characteristic of Western Pacific's aircraft's is that they are painted with advertisements, which brings them both revenue and public attention. Sam's Town Las Vegas is a hotel and casino located in Sunrise Manor, Nevada[2] on the corner of Flamingo Road and Boulder Highway. It is one of the casinos owned and operated by Boyd Gaming. Based on the Boeing 737 MAX8 V2 by TDS, full model including FSND advanced 737 VC.

FSX/P3D Airbus A319-115WL Tibet Airlines package. Tibet's flag carrier airlines is based at Lhasa Gonggar Airport, Tibet and operates 24 Airbus A319 on flights to China, Russia, Nepal, Thailand and Finland. The A319 is a shorter version of the A320 family. Custom Airbus sounds. Also added jetway configs (Ctrl J). Updated Project Airbus A319 winglet model. Revised original VC by Microsoft updated by Collin MacKenzie to include built in FMC and more. Textured and assembled for P3D5 (Should also work in other P3D and FSX) by Chris Evans

FSX/P3D Airbus A321-271NX Philippine Airlines package. Based at Manila Ninoy Aquino International Airport, Philippine Airlines currently has 2 Airbus A321-271NX. Includes 2020 revised model and VC. Modified the Project Airbus A321-200 to resemble a NX model with window and door placements. 2020 updated A321 model by Project Airbus updated to FSX native and updated VC by Speedbird77. Autobrakes fully functional within the vc. Check near the gear lever. ECAMS lower screen is more accurate. Credit to "FsWorX". Includes A321 checklist. Airbus sounds included. Tested in P3D v5 and should work in FSX and previous P3D versions. Zip preview for images. Textured and packaged by Chris Evans

FSX/P3D Boeing 787-10 ANA All Nippon Airways with FSX Native 787 VC. Japan's largest airlines currently has 2 Boeing 787-10 and another 12 on order. The high quality Boeing 787-10 from TDS. The VC is the Erik Bender adaption of the X-plane Mariano Gonzalez (MagKnight)'s 787 VC. Cockpit textured lighter grey. TDS high spec. native FSX Boeing 787-9 model. See Document to get the best out of the VC. Textured, assembled and tested in P3D v5 by Chris Evans. Should also work in earlier P3D & FSX.

FSX P3D v3,4,5 Piper Cherokee with G1000 panel. This is the default P3D PA28 180 using the Mooney G1000 cockpit. By Chuck Dome. Public Domain.