Jul 12, 2020 |
Prepar3d > Vintage > Page 1
 
1 2 3 4 5 6 ...
 
FSX/P3Dv3,v4 North American P-51D Mustang_2Dpanelfix
0.78Mb (246 downloads)
FSX/P3Dv3,v4 North American P-51D Mustang_2Dpanelfix This is the missing main.bmp. Just put it in the panel.1folder. Sorry for the trouble, A.F.Scrub
Posted Jul 5, 2020 04:57 by A.F.Scrub
 
FSX/P3Dv3,v4 North American P-51D Mustang
FSX/P3Dv3,v4 North American P-51D Mustang
11.88Mb (755 downloads)
FSX/P3Dv3,v4 North American P-51D Mustang The P-51D Mustang remains to this day the most widely recognized and deeply revered propeller driven fighter aircraft ever built. Originally designed for the RAF and equipped with an Allison engine, the Mustang was later fitted with the Packard-Merlin, which provided superior high altitude performance. With long range tanks, the Mustang could escort bombers to Berlin and still have time to fight. FSX/P3D native mdl by A.F.Scrub
Posted Jun 28, 2020 05:31 by A.F.Scrub
 
Corsair F4U-1 new model file
0.91Mb (613 downloads)
FSX/P3Dv3,v4 Vought Corsair F4U-1a model correction. This corrects the textures of the crankcase and turning prop on the Standard F4U-1a_FSX model . Replace the original mdl file by this one. fix by A.F.Scrub.
Posted Jun 17, 2020 09:30 by A.F.Scrub
 
FSX/P3Dv3,v4 Vought Corsair F4U-1 and F4U-2 texture correction.
0.46Mb (395 downloads)
FSX/P3Dv3,v4 Vought Corsair F4U-1 and F4U-2 texture correction. This corrects the textures of the crankcase and turning prop on both the Standard and Nightfighter version. Replace propdisk.bmp in the common texture and the AH_F4UBird4_t.bmp in the other texture maps. by A.F.Scrub.
Posted Jun 17, 2020 04:32 by A.F.Scrub
 
FSX/P3Dv3,v4 Vought Corsair Early F4U-2
FSX/P3Dv3,v4 Vought Corsair Early F4U-2
22.13Mb (693 downloads)
FSX/P3Dv3,v4 Vought Corsair Early F4U-2 The Corsair entered service in 1942. Although designed as a carrier fighter, initial operation from carrier decks proved to be troublesome. Its low-speed handling was tricky. Landing a Corsair on a carrier was a difficult task. For these reasons, most Corsairs initially went to Marine Corps squadrons which operated off land-based runways. The U.S. Navy did not get into combat with the type until September 1943. Standard and Nightfighter version included. Native FSX/P3Dv3,v4 mdl by A.F.Scrub.
Posted Jun 9, 2020 05:54 by A.F.Scrub
 
FSX native B-36 Peacemaker for FSX and P3D
FSX native B-36 Peacemaker for FSX and P3D
135.57Mb (1766 downloads)
FSX native B-36 Peacemaker. Built by consolidated Vultee (Convair) in the late forties, The Convair B-36 Peacemaker was the largest American bomber every produced. Development of the huge plane began in 1941. The Army Air Force wanted a bomber that could fly from the United States to Europe, drop bombs, then return. The prototype first flew on August 8, 1946. The first operational models were delivered to the Strategic Air Command 1948. Included in this file are versions, A, B, D, H, and J models. The A and B versions are textured in FS9 style polished metal textures. Includes a virtual cockpit based on the b-36b cockpit, with a few updated and modern instruments, and a full gauge panel on the engineer station. custom sounds taken from scenes in the movie "strategic air command." Garry Shetter
Posted Jun 8, 2020 02:34 by uploader
 
FSX/P3D Blackburn Beverley V1A Package
FSX/P3D Blackburn Beverley V1A Package
128.44Mb (2165 downloads)
FSX/P3D Blackburn Beverley V1A Package. The Blackburn Beverley was a four-engined, medium-range high-capacity transport. Its first flight took place in June 1953 and a total of forty-seven aircraft were built. The Beverley had an outstanding ability for packing and dropping heavy loads of up to 22 tons and, aided by powerful propeller reversing and a sturdy fixed undercarriage, it was able to land and take off at small and makeshift airstrips. Employed on a wide variety of military and humanitarian missions, for the ten years of its active service it was the R.A.F.'s proverbial no-nonsense workhorse. To date, only the first production Beverley survives as a museum piece. The model comes with an ILS and GCA- capable VC, variable intensity cockpit lighting, and propeller reversing. Two textures are included, XB261 representing a fictional reincarnation of the third production aircraft, and XM109 as painted in the 'Middle East' camouflage scheme of the final batch. Models and textures by Manfred Jahn, flight dynamics by Wayne Tudor, and soundset by Ted Wolfgang.
Posted Jun 6, 2020 13:32 by uploader
 
Update for FSX of the Corsair F4U
Update for FSX of the Corsair F4U
22.02Mb (981 downloads)
This is an update for FSX of the Corsair by A.F.Scrub. I corrected any contact point position that needed it; I added and or changed gauges on all 3 panels; the fighting panel can be toggled now; I added the other 2 guns and corrected positions where necessary; and I updated the flight dynamics. Should also work in P3D4.5
Posted Jun 3, 2020 11:20 by Bob Chicilo
 
FSX/P3Dv3 & 4 Vought Corsair F4U-1a
FSX/P3Dv3 & 4 Vought Corsair F4U-1a
23.60Mb (1113 downloads)
FSX/P3Dv3 and 4 Vought Corsair F4U-1a. The Corsair entered service in 1942. Although designed as a carrier fighter, initial operation from carrier decks proved to be troublesome. Its low-speed handling was tricky. Landing a Corsair on a carrier was a difficult task. For these reasons, most Corsairs initially went to Marine Corps squadrons which operated off land-based runways. The U.S. Navy did not get into combat with the type until September 1943. Native FSX/P3Dv3,v4 mdl by A.F.Scrub.
Posted May 12, 2020 12:55 by A.F.Scrub
 
FSX/Acceleration/P3dV3/FS2004 Upgrade For Kazunori Ito's Arado E.555-1 Bomber
FSX/Acceleration/P3dV3/FS2004 Upgrade For Kazunori Ito's Arado E.555-1 Bomber
15.64Mb (441 downloads)
FSX/Acceleration/P3dV3/FS2004 Upgrade for Kazunori Ito's Arado E.555-1 WWII concept long range bomber. The modified model has now a VC regarding Ito's 2D panel and an additional repaint in camo. The only change on the exterior model is the animated turret. (Original text Wikipedia: The Arado E.555 was a long range strategic bomber proposed by the German Arado company during World War II in response to the RLM's Amerikabomber project. The E.555 designation was applied to a series of long range jet bomber designs of various sizes, powerplant, crew and weapon load configurations. As design studies only, no aircraft were developed or constructed and the entire E.555 project was cancelled at the end of 1944). Kazunori Ito is my idol for twenty years. It is a pity that he was forced to stop to continiue with his great hobby in building an incredible high amount of interesting aircrafts. Honouring his work but beeing afraid that this very rare and special aircraft will be lost for actual or newer simulators like Acceleration or P3Dv3 I allowed myself to upgrade this futuristic beauty with a VC and configured with FSX/P3d compatibel gauges. Original model and 2D panel by Kazunori Ito, virtual cockpit implemantation for a 3 men crew by Erwin Welker
Posted May 3, 2020 03:05 by Erwin Welker
 
 
1 2 3 4 5 6 ...