FSX/P3D Raytheon/Beechcraft T-6 Texan II US Military Pack 2. This is the ex-payware T-6 II Texan from Iris in 3 US liveries. USAF Don't mess with Texas, USAF Moody AFB, and USMC VMIT-10 Retro. The Beechcraft T-6 Texan II is a single-engine turboprop aircraft built by the Raytheon Aircraft Company. A trainer aircraft based on the Pilatus PC-9, the T-6 has replaced the Air Force's Cessna T-37B Tweet and the Navy's T-34C Turbo Mentor. Special thanks to Iris Simulations/Dave Brice for allowing this to be distributed free. Thanks to Andy Nott, Chris Brisland, John Detrick for the great textures. Put together and tested in P3Dv4 by Chris Evans. Should work in FSX and all previous P3D versions.

FSX/P3D Raytheon/Beechcraft T-6 Texan 2 RAF Pack 1. This is the ex-payware T-6 II Texan from Iris in 3 RAF liveries. RAF Cammo, Green and Gloss Black. The Beechcraft T-6 Texan II is a single-engine turboprop aircraft built by the Raytheon Aircraft Company. A trainer aircraft based on the Pilatus PC-9, the T-6 has replaced the Air Force's Cessna T-37B Tweet and the Navy's T-34C Turbo Mentor. Special thanks to Iris Simulations/Dave Brice for allowing this to be distributed free. Thanks to Andy Nott for the great textures. Put together and tested in P3Dv4 by Chris Evans. Should work in FSX and all previous P3D versions.

FSX/P3D Boeing 737-Max 9 FlyDubai Package. Based in ... (guess where..) Dubai, FlyDubai is a national owned low cost airline flying to destinations around the Middle East, Asia, Africa and Europe. As of December 2018, FlyDubai have 2 Max9 in operation and orders coming in for a further 68. FSX Boeing 737Max9 native model by TDS with upgraded 737-800 VC added. The high spec Boeing 737-Max9 from TDS. The VC is the Alejandro Rojas Lucena/FSND fantastic revised Boeing 737-800 VC model blended with Ken Wiggington's 737Max updates on the default 737 VC. This VC model includes Working wipers (right mouse click on switch) with rain effect. Switches for LCD Screens, EICAS, PFD, MFT. Autobrake switch. Opening pilots window. Cabin Lights switch. Realistic FMC & HGS (HUD). Ground Proximity Warning System (GPWS), More Realistic night VC textures. There are custom CFM eco sounds included for that extra realism. Use - Instrument panel - Util for ground vehicles, doors stairs, fuel truck, buses. New Utility allows Bus, fuel, doors and more. (Go to Views - Instrument panel - Utility). VC added and edited to allow correct VC views, correct jetways and wheel levels. Credits go to TDS wonderful native FSX Boeing Max9 model. I added the real looking textures by Stefan Bree. See VC docs to get the best out of the VC and FMC. 737 Checklist added. Assembled and prepared for FSX & P3D up to v4 by Chris Evans.

FSX/P3D Bombardier Global Express Private VH-ICV Package. This aircraft is registered to Bank of America, Sydney, Australia. FSX Native model by Iris with added enhanced new upgraded VC by David Hoeffgen , includes built in FMC, working wipers and more (see VC docs in folder). Added the high quality textures by DylanA. Includes Honeywell FMC (Find it in Instrument panel - Views) and revised MFD and custom sounds. High quality model with opening doors and stairs. Tested on P3Dv4 and should be ok in FSX and other P3D versions by Chris Evans. Assembled and by Chris Evans.

For FSX and P3D1-3 users. This patch resolved the model display bug in FSX and P3Dv 1-3. Simply replace the model file of the AplhaJet armed version with this one. Sorry for the circumstances !! Bluebear

The Vickers Type287 "Wellesley" was a British 1930s light bomber built by Vickers-Armstrongs at Brooklands near Weybridge, Surrey, for the Royal Air Force. While it was obsolete by the start of the Second World War and unsuited to the European air war, the Wellesley was successfully used in the desert areas of East Africa, Egypt and the Middle East. This is a panel update for the Wellesley designed by Kazunori Ito. It features a new enhanced and more realistic VC and a new 2D panel with all new instruments. Animated yoke in the 2D panel, smoke and additional camera views added. The FDE has been corrected also. Thanks to Kazunori Ito for the original model, to Andre Ludick for the FDE improvement and to Erwin Welker for the added camera views. VC improvement and new 2D panel by Michael Pook.

Boeing 737-300/400/500 Classic Version 1.1. Originally designed by Erick Cantu under the Kittyhawk Studios and Vistaliners label, now available as FSX native models. Features 6 models, specular mapping, bump mapping. Virtual cockpit, sounds, panel aliased from the default Boeing 737-800. New for this version include a number of model fixes, winglets throughout all models, eyebrow and no eyebrow for all models and wingflex. Also includes a separate installation for FS2004. By Eagle Rotorcraft Simulations.

FSX/P3D Airbus A380-800 Emirates Expo 2020 package. Emirates is the largest airline in the Middle East and owned by the government of the United Arab Emirates (UAE). Emirates is also the largest operator of the A380 with 109 in operation and a further 53 on order. Added the better Thomas Ruth VC with updates by Chris Evans and Louis Quintero. Use FMC under Views/Instrument panel in FSX menu. (FSX : Go to Views -Instrument Panel. P3D: Go to Vehicle - Instrument panel). RR engine sounds. Added the great textures by Stefan Bree. Added checklist. Includes built in FMC by Garret Smith. Original model by Project Airbus/Thomas Ruth. Tested on P3Dv4 and should be fine in FSX and other P3D versions. Improvements include upgraded panel and textures with HGS, extra views. Zip preview for images. Custom package by Chris Evans

Automixture Switch for panels using Bjorn Kesten's excellent code for automix calculation. By his permission to freely distribute or modify. Select for either auto rich while climbing or auto lean for cruising. Indicator lights to show which mode is active.

New version: Updated installer and auto-update functionality along with chart downloaded changes to support browser updated security measures. FS Flight Builder is a utility for general aviation flying that will build flight files for FSX (flt), FSX Steam Edition (flt), and Prepar3D (fxml) based on waypoints and other data either entered manually or imported from SkyVector using the Plain Text Link information. Among other things, you can select your starting position, aircraft, and VFR or IFR flight plan. One of the most interesting features of the application is that it will include a Briefing file, added to the aircraft's built-in kneedboard, that will include departure and destination airport information (runways, frequencies, weather, and charts) as well as navigation frequencies along the route. Have you ever started up flight simulator and wondered “where do I want to go today”? The new Destination Chooser functionality can help to solve that problem. The screen allows you to enter your departure airport and choose various parameters for your destination (like min and max distance, tower availability, ILS availability, runway length requirements, etc.). How to install: Run Setup.exe and simply follow the installation wizard. When you run the application for the first time (make sure your flight simulator is not running), it will build the database from your flight sim data. Be patient. It could take a few minutes. It will attempt to locate your flight sim folder and flight plan folders automatically. If it can't find them, however, you'll need to select them from the options menu. IMPORTANT! Because FS Flight Builder saves to your Flight Sim directories, it MUST be run in Administrator mode. To do this, right-click on the desktop icon, select the Compatibility tab, and check the Run as administrator checkbox. IMPORTANT! The airport and navaid databases for FS Flight Builder are built using Peter Dowson's excellent Make Runway utility and the equally excellent BGL2XML utility from ScruffyDuck Software. The links to these utilities are below. They must be added to the main FSX or Prepar3D folder. Peter Dowson's website: http://www.schiratti.com/dowson.html ScruffyDick Software website: http://www.scruffyduck.org/bgl2xml/4584282773 It's also important to note that Version 1.7 of BGL2XML is required for Prepar3D V3 and higher. Author: Tom Arduini The latest installer can always be found at http://www.arduiniwebdevelopment.com/fsflightbuilder/fsflightbuilder.zip