This addon requires the recently released as freeware Milviz Bell 407 and Lorby's FireFighterX Application to attach firefighting assets to the helicopter for aerial firefighting operations. This pack comes with two USFS contract repaints representing N911FS, aka H535 based at Keenwild Station in the San Bernardino National Forest in Southern California. The other represents N922FS, which was contracted for the State of Wyoming's Helitack Program. N911FS represents a rare 245 gallon equipped external tank and N922FS a more traditionally seen 210 gallon bambi bucket. Repaints are compatible with both FSX and P3D, but the firefighting assets are only compatible with P3Dv4.4 or higher due to sim limitations. Firefighting asset models and repaints by Nicholas Mitchell.

FSX/P3D Boeing 777-200ER Jin Air package v2. Jin Air is a South Korean low cost airline based at Gimpo and Incheon International Airports. Currently Jin Air have 4 Boeing 777-200ER and fly to destinations around Asia as well as Australia and Honolulu. Updated with new VC and more. Realistic CFM soundpack added. Original VC by Jacob Kubique. Converted to FSX native by Zachary777. VC updates by Speedbird77 with gauges by G. Munro and Ken Wiggington. See Credits for more. Textured and assembled for P3d v5.3 by Chris Evans. Should also work in FSX nd previous P3D.

FSX/P3D Boeing 747-400F Suparna Airlines package v2. Suparna is a Chinese passenger and cargo airline based at Shanghai–Pudong International Airport and is part of the Hainan Airlines Group. Previously Yangtze River Airlines, Suparna now operate 4 Boeing 747-400F flying to destinations in Europe, the USA as well as Asia. Project Opensky Boeing 747-400f FSX native model with the much improved Boeing 747 internal model (VC) from Alejandro Rojas Lucenda (Manual included). Model includes ground cargo servicing, stairs (FSX - Go to Views - Instrument Panel -Posky Utility. P3D go to Vehicle - Instrument Panel -). I am updating many of my 1st repaints to fix or improve textures. Skyspirit/Project Opensky native FSX Boeing 747-8F assembled and upgraded for FSX with the developed B747 VC (3d virtual cockpit) from Alejandro Rojas Lucenda (Manual included). This is the Project Opensky FSX native Boeing 747-800F model, and includes ground cargo servicing, stairs (FSX - Go to Views/P3D go to Vehicle - Instrument Panel -Posky Utility), opening nose section and more. Custom GE sounds included. Also includes the Boeing 747 VC textures upgrade. This give a much clearer 747 interior virtual cockpit look. Textures and assembled for P3Dv 5.3 by Chris Evans. Should work in FSX and previous P3D versions.

Piper Archer-III PA28-181 Pack. This is little revamp of the Piper Archer-III by Rien Cornelissen. Overall the gauges in VC now do have darker background or overall color as opposed to Rien's release. Many small changes and additions have been applied. For a full list see the file Piper Archer-III_mod.pdf in the 'Docs' folder of the aircraft. Some features to mention here are: - Newly created blue and green liveries. - Added new VC cameras. - Added documentation including Reference and Checks kneeboard files. - Added original POH for the Piper Archer III. - Small changes and additions in Light configuration. - Small additions to VC consist of: - CockpitSounds - Revised GNS 430 - Radio Stack - Annunciator panel is now more extended. - GPS-NAV switch in Auto Pilot, Heading value display and adjust values in Auto Pilot. - Some tooltips in overhead are added. - Recoloring of backgrounds of some gauges. - Made some gauges clickable to toggle them in expanded state. - Panel configurations for FSX included. - Install guide available in INSTALL.txt

This is the scenery of Buenos Aires Aeroparque Jorge Newbery. There is no jetway either SODE or default here. But you are welcome to edit it and add jetway if you want to. Tested only in P3D V4/V5, but will likely not work in Earlier P3D and will never work in FSX.

"KulusukX" scenery package is the most real mesh for Fligh Simulator X for Kulusuk area in Greenland. This area covers more than 8,822 Sq. miles." "The mesh data is made from ASTER GDEM data. While ASTER GDEM data is not nearly refined as STRM source data, the data is the best data for Greenland. “The raw ASTER GDEM data is not without its problems, but I have remaked large areas to make it usefull. But it's not only the mesh I have reworked. The coastline and islands are reworked for this release. Tasiilaq Helistop (BGAM) and the terminal is also added to the scenery. Kuummiut Helistop (BGKM), Sermiligaaq Helistop (BGSG) and Timmiatmiut Helistop (BGTN) is added with helistops, adn some standard FSX buildings. This release have redefined land class for the area. This gives you a more realistic land class. By Abdul Hamid

These modifications are for and of the Piper PA-44 Seminole aircraft created by Rien Cornelissen. They consist of modified gauges, added Cockpit sounds, added VC cameras, added documentation and kneeboard files, slightly changed light configuration, enhanced Bendix King Auto Pilot, TCAS, GPWS, and some new and some revised gauges as well. A new sound set has been added because of issues with the original aliased sounds in P3Dv4. Finally one newly created livery has been added. Now this pack has 4 different liveries. All has been tested okay in Prepar3D v4+.and in FSX as well. Note that this is the complete aircraft. See for full information and credits file 'Piper Seminole RC mod.pdf' in the 'Docs' folder of the aircraft. Happy flights.

This addon was specifically created to be attached to the Milviz UH-1H using Lorby's FirefighterX Client. Without this client, the tank cannot be attached to the helicopter. The Simplex Aerospace 360 gallon water tank was installed on many versions of the Bell 205/UH-1 Huey in aerial firefighting. The version represented here, is the one seen on Cal Fire UH-1 Super Hueys. By Nicholas Mitchell.

The HTSU or Heli-Tender Support Vehicle is deployed with one of Cal Fire's rotary wing assets to provide field support to Cal Fire's helicopters without the need for the aircraft to return to an airfield to refuel, or resupply. Cal Fire currently operates one HTSU alongside each of either it's soon to be retired UH-1 Super Hueys or the S-70I Firehawks. As of 2023, there are currently 16 active rotary assets flying with Cal Fire. This addon requires Lorby's FireFighterX Client to place any of the 16 HTSUs. Each HTSU is uniquely marked for it's aircraft/base assignment. A single generic static scenery version has also been included for scenery builders to use if they so wish. By Nicholas Mitchell.

FSX/P3D Boeing 737-800 TAROM package. Romania's flag carrier airline is based at Bucharest Henri Coanda International Airport and currently has 4 Boeing 737-800 flying to destinations worldwide. I am revising my old repaints to improve textures and fix errors. Credit goes to TDS for the great model and paint kit. Package includes revised Boeing 737-800 VC by Alejandro Rojas Lucena/FSND/Ken Wiggington upgraded Boeing 737-800 VC model. Autobrake switch. Opening pilots window. Cabin Lights switch. Realistic FMC. Ground Proximity Warning System (GPWS). Includes added MFD and PFD panels. Exits, wheel levels, jetways and views corrected for FSX/P3d. See VC docs to get the best out of the VC and FMC. Textured and texted in P3D 5.3 by Chris Evans. Should also work in earlier P3D versions as well as FSX.