BA Poppy Appeal 2003 livery for the payware DC designs Concorde. Gives accurate livery points.

Flight Analyzer Utility FsQC v7.20 Flight Data Recorder - with Logbook. FOR: P3D, FSX(Steam) and FS2004 Now MSFS2020 also supported. Very easy to use, just make a flight plan in the simulator or in this utility. (But please read the readme.txt file) What this program does: quickly change the settings of MSFS2020/P3D/FSX/FS2004, such as time, date, fuel, weight, traffic etc. Start a failure sytem, such as gear, flaps, engine, etc. runway detecting system to see wich runways are in use. Quickly look at Airport Info for all possible info such as: ILS, Radio, RW length, Elevation, etc, etc. This is all fully freeware. Full manual at: www.fsqc.eu Only Limited demo for: The flight analyzing/data recording, Logbook and the PDF Flightreport. Flight analysis start recording at the moment when you begin taxiing. It gives you huge information such as: - takeoff- and landing-weight. - takeoff- and landing-roll in m. and ft. - separate fuel consumption in taxi, climb, cruise and descent. - maximum banking in flight. - which speed you using the flaps and gear. - when autopilot on or off. - vertical speed on touchdown. - reverser set after landing. - wich speed you cancel reverser. - bouncing at landing. - graphical landingchart with Touch&Go and Missed Approach. - graphical Climb-, Descent- and Full- flightchart. - and lots of more. You can better look the example of the pdf document. Requirements: Computer with Windows7 or higher and internet access.(XP also supported look in the help/manual) Flightsimulator MSFS2020, P3D, FSX(Steam), or FS2004 and FSUIPC installed. Note: requires paid activation for full use of the Flight Analyzer and Logbook. Register and you have 1 month free. Program fully works without registration at airport Athens and Iraklion (Greece). By Evander Tholen.

FSX/P3D de Havilland Canada DHC-7 Air Tindi pack. Air Tindi is a Canadian Airline based at Yellowknife Airport, Northwest Territories. Air Tindi operates passenger, government and other contract services around Northwest Territories and have 5 DHC-7 aircraft in their fleet. Model by Milton Shupe, Mike Kelly, George Arana and Sim-Outhouse. FSX native conversion by Eagle Rotorcraft Simulations. Textured and tested in P3Dv5 by Chris Evans. Should work in FSX and all previous P3D versions.

This freeware addon upgrades the default terrain mesh of the American Samoa Islands to a stunning 10 meters in resolution. All Mesh has been derived from 1/3 arc-second USGS elevation data. Compatible with FSX, P3Dv2, P3Dv3, P3Dv4, & P3Dv5. Scenery created by Chris Britton (Rotornut44) of Emerald Scenery Design.

This freeware addon upgrades the default terrain mesh of Puerto Rico and the US Virgin Islands to a stunning 10 meters in resolution. Now, completely reworked from the ground up with the latest 2020 elevation data! All Mesh has been derived from 1/3 arc-second USGS elevation data. Compatible with FSX, P3Dv2, P3Dv3, P3Dv4, & P3Dv5. Scenery created by Chris Britton (Rotornut44) of Emerald Scenery Design.

This freeware addon upgrades the default terrain mesh of the Hawaiian Islands to a stunning 10 meters in resolution. All Mesh has been derived from 1/3 arc-second USGS elevation data. Compatible with FSX, P3Dv2, P3Dv3, P3Dv4, & P3Dv5. Scenery created by Chris Britton (Rotornut44) of Emerald Scenery Design.

FSX/P3D ATR42-600 Aeromar. Aeromar is a Mexican airline based at Mexico City Licenciado Benito Juarez and currently operate 12 ATR-42 aircraft flying to destinations around Mexico, Latin America and the USA. Model and VC by Virtualcol. Ex payware. Textured and assembled for P3Dv5 and should be ok in FSX and earlier P3D versions by Chris Evans.

FSX/P3Dv4,V5 Cessna 172C Skyhawk The Cessna 172 Skyhawk is an all-metal, single-engine, four-seat, high-wing light utility aircraft, produced by Cessna Aircraft Company between 1958 and 1962. Early 172s were similar in appearance to the 170s, with the same straight aft fuselage and tall landing gear legs, although the 172 had a straight tailfin while the 170 had a rounded fin and rudder. In 1960, the 172A incorporated revised landing gear and the swept-back tailfin, which is still in use today. Native FSX/P3Dv4,v5 by A.F.Scrub.

FSX/P3D ATR42-300 Calm Air. Calm Air is a Canadian airline flying in northern Manitoba and the Kivalliq Regio, Nunavut with it's base at Winnipeg Airport. Calm Air currently operate 7 ATR 42. Model and VC by Virtualcol. Ex payware. Textured and assembled for P3Dv5 and should be ok in FSX and earlier P3D versions by Chris Evans.

FSX/P3D ATR72-600 Binter Canarias package. Binter Canarias is based at Gran Canaria Airport in the Canary Isalands. Model and VC by Virtualcol. Ex payware. Textured and assembled for P3Dv4.5 and should be ok in FSX and earlier P3D versions by Chris Evans.