FSX/P3D de Havilland Canada DHC8-Q400 Package v2.0. The "Dash 8" Q400 (Q for Quiet) was originally developed and built by Bombardier, but was sold in 2019 to Longview Aviation Capital, who re-instated the de Havilland Canada brand. Includes 6 liveries: ASky Airlines (ET-AQD), Air Baltic (YL-BBV), Flybe (G-JEDI), Croatia Airlines (9A-CQB), Westjet Encore (C-GENU) and White (C-GKUK). New wide 2D glass panel and updated Premier Aircraft Design (PAD) VC V2.0, with a new complete set of XML gauges including multi-function PFD, MFD and EICAS screens. This aircraft is based on the beautiful DHC8-Q400 FSX model by Dreamwings, featuring a brand new Air file and much improved flight dynamics. All textures are very detailled with new alpha layers and reflections. All textures are DXT5. Improved night lighting, with a new set of effects. The new panels are using the following extra gauges: HGS, Ground Services, VSpeed, Altitude Callout, Icons32 and new Cockpit sounds. Most of these gauges are using the FSX XML Sound gauge by Doug Dawson. Realistic Pratt and Whitney PW150A sound file. Tested in FSX Acceleration (DX10) and FSX Steam Edition (DX9). Not tested in P3D but should work correctly up to V3. Sound effects may not work in V4.

FSX/P3D ATR42-500 Air Corsica. Air Corsica is based at Ajaccio Napoleon Bonaparte (Campo dell'Oro) Airport on the French Island of Corsica and currently have 1 ATR42-500 in their fleet. Model and VC by Virtualcol. Ex payware. Textured and assembled for P3Dv5 and should be ok in FSX and earlier P3D versions by Chris Evans.

FSX/P3D de Havilland Canada DHC-7 United States Army pack. The United States Army uses the DHC-7 as a surveillance aircraft. Model by Milton Shupe, Mike Kelly, George Arana and Sim-Outhouse. FSX native conversion by Eagle Rotorcraft Simulations. Thanks to Matt Ervin for the great textures. Textured and tested in P3Dv5 by Chris Evans. Should work in FSX and all previous P3D versions.

P3D V4+ LSH Maddog MD-83 in British Island Airlines - BIA livery. Texture only for payware Maddog model. Repaint by Sergey Gleba aka serg09. Link to my products on SimMarket: http://secure.simmarket.com/paintsim.mhtml

FSX/P3Dv4,V5 Cessna 172D Skyhawk The Cessna 172 holds the reputation as the most successful aircraft in terms of airplanes built. Over 44,000 have been built by Cessna since its debut in 1956. The 1963 172D model introduced the lower rear fuselage with a wraparound Omni-Vision rear window and a one-piece windshield. Native FSX/P3Dv4,v5 by A.F.Scrub.

BA Poppy Appeal 2003 livery for the payware DC designs Concorde. Gives accurate livery points.

Flight Analyzer Utility FsQC v7.20 Flight Data Recorder - with Logbook. FOR: P3D, FSX(Steam) and FS2004 Now MSFS2020 also supported. Very easy to use, just make a flight plan in the simulator or in this utility. (But please read the readme.txt file) What this program does: quickly change the settings of MSFS2020/P3D/FSX/FS2004, such as time, date, fuel, weight, traffic etc. Start a failure sytem, such as gear, flaps, engine, etc. runway detecting system to see wich runways are in use. Quickly look at Airport Info for all possible info such as: ILS, Radio, RW length, Elevation, etc, etc. This is all fully freeware. Full manual at: www.fsqc.eu Only Limited demo for: The flight analyzing/data recording, Logbook and the PDF Flightreport. Flight analysis start recording at the moment when you begin taxiing. It gives you huge information such as: - takeoff- and landing-weight. - takeoff- and landing-roll in m. and ft. - separate fuel consumption in taxi, climb, cruise and descent. - maximum banking in flight. - which speed you using the flaps and gear. - when autopilot on or off. - vertical speed on touchdown. - reverser set after landing. - wich speed you cancel reverser. - bouncing at landing. - graphical landingchart with Touch&Go and Missed Approach. - graphical Climb-, Descent- and Full- flightchart. - and lots of more. You can better look the example of the pdf document. Requirements: Computer with Windows7 or higher and internet access.(XP also supported look in the help/manual) Flightsimulator MSFS2020, P3D, FSX(Steam), or FS2004 and FSUIPC installed. Note: requires paid activation for full use of the Flight Analyzer and Logbook. Register and you have 1 month free. Program fully works without registration at airport Athens and Iraklion (Greece). By Evander Tholen.

FSX/P3D de Havilland Canada DHC-7 Air Tindi pack. Air Tindi is a Canadian Airline based at Yellowknife Airport, Northwest Territories. Air Tindi operates passenger, government and other contract services around Northwest Territories and have 5 DHC-7 aircraft in their fleet. Model by Milton Shupe, Mike Kelly, George Arana and Sim-Outhouse. FSX native conversion by Eagle Rotorcraft Simulations. Textured and tested in P3Dv5 by Chris Evans. Should work in FSX and all previous P3D versions.

This freeware addon upgrades the default terrain mesh of the American Samoa Islands to a stunning 10 meters in resolution. All Mesh has been derived from 1/3 arc-second USGS elevation data. Compatible with FSX, P3Dv2, P3Dv3, P3Dv4, & P3Dv5. Scenery created by Chris Britton (Rotornut44) of Emerald Scenery Design.

This freeware addon upgrades the default terrain mesh of Puerto Rico and the US Virgin Islands to a stunning 10 meters in resolution. Now, completely reworked from the ground up with the latest 2020 elevation data! All Mesh has been derived from 1/3 arc-second USGS elevation data. Compatible with FSX, P3Dv2, P3Dv3, P3Dv4, & P3Dv5. Scenery created by Chris Britton (Rotornut44) of Emerald Scenery Design.