FSX/P3D Airbus A350-900XWB Saudia package. Also known as Saudi Arabian Airlines, Saudia was founded in 1945 and is the national airline of Saudi Arabia, based at Jeddah's King Abdulaziz International Airport. Saudia are expected to order either the A350 or the Boeing 787 in 2019, to add more wide body aircraft to their existing fleet of nearly 200, flying to destinations around the Middle East, Europe, North America and Asia. Added the better Thomas Ruth VC with updates by Louis Quintero and Chris Evans. Use FMC under Views/Instrument panel in FSX menu. (FSX : Go to Views -Instrument Panel. P3D: Go to Vehicle - Instrument panel). Added better views. Textures by Emiliano Rujano. The Airbus A350 XWB is a family of long-range, twin-engine wide-body jet airliners from the European aircraft maker Airbus. The A350 is the first Airbus aircraft with both fuselage and wings made mainly from carbon fibre structure. The A350 is intended to replace the A340 and compete with Boeing's 787 and 777. Tested on P3Dv4.3 and should be ok in FSX and earlier P3D versions by Chris Evans.

Antwerp International Airport (ANR/EBAW) is a small international airport serving Antwerp, the second most populous city of Belgium. After two years work and taking over 2000 photos. This is the very first publicly available pixel accurate photoreal scenery for this airport. Featuring updated radio freqs (2017), accurate buildings and placement, custom AI Fokker 50 AI traffic, static SV-4Bs and SODE powered windsocks. It also comes with two hangars with accurate and accesible interiors completed by the inclusion of the neighbouring WW1 fort. Optimized for P3D, compatible with FSX SP2.

This is an enhancement of the default P3Dv4 airport. There are custom made terminal buildings included to replace the ones included in the default scenery; all aircraft gates are included and have been correctly coded using Airport Design Editor 1.76.6715, according to the latest terminal map information; all jetways and scenery objects will display, provided scenery complexity in P3Dv4 is set at normal or higher; autogen objects have been prevented from displaying on the airport grounds; the magnetic variation has been changed to the correct current value; Runway 18R-36L has been changed to 18C-36C and a new runway 18R-36L has been added, along with ILS,RNAV, and GPS approaches; a new airport vehicle network has been built; extra fuel trucks have been added throughout the airport; the tower view has been changed to display from the roof of the control tower; all taxiway designators are correct and all taxiway signs are correctly placed and named; There is the option to open all runways to AI traffic; there is a large and highly detailed cargo area for DHL; and there are two files included for GSX L2 users to enable them to have custom GSX L2 SODE jetways displayed. This airport has only been tested in P3Dv4, and is not guaranteed to work in earlier versions. Please refer to the README FIRST.txt file to insure proper installation of all files.

P3D/FSX McDonnell Douglas F-4B Phantom II US Marines Package. 3 USAF/Marines liveries ; Marines 45th TFS/2nd AD, Marines VMFA-333 Clean, Marines VMFA-351 AA. The McDonnell Douglas F-4 Phantom II is a tandem two-seat, twin-engine, all-weather, long-range supersonic jet interceptor and fighter-bomber originally developed for the United States Navy by McDonnell Aircraft. It first entered service in 1960 with the U.S. Navy. FSX Native model rebuilt by David Robles from the Virtavia/Alphasim original. VC is the LLS conversion which near matches the F4 VC. Added the realistic high quality textures by Steve Bryant, Virtavia and interior textures by Virtavia. Tested in P3D v4.2 and should work in FSX and P3D 4.3 and earlier P3D versions. Package assembled by Chris Evans. ***NOTE: P3D aircraft does not show in select preview window but seems to show up in the sim without issue.

FSX/P3D v3,v4 Curtiss Hawk BF2C-1 The BF2C Goshawk (Model 67) carrier fighters were introduced into United States Navy service in Oct 1934 for use aboard USS Ranger. Their service aboard Ranger would only last a number of months as it was observed that their landing gears were not up to par, but generally the US Navy felt that the 27 purchased contributed to the development of the American aircraft carrier force. FSX/P3D v3,v4 upgrade by A.F.Scrub.

FSX/P3D Airbus A319-200 Ernest package. Based at Milan Malpensa Airport, Ernest is a new Italian Airline that began flying in 2016 and now operate flights throughout Italy as well as Ukraine and Albania. As of April 2019, Ernest have 1 A319 and also operate 3 Airbus A320-200 with a further 4 on order. Added the better Thomas Ruth VC with updates by Louis Quintero and Chris Evans. Use FMC under Views/Instrument panel in FSX menu. (FSX : Go to Views -Instrument Panel. P3D: Go to Vehicle - Instrument panel). Added better views. Model by Project Airbus. Textures by Chris Evans. FMC by Garret Smith. Includes A320 checklist by Werner Schott. Airbus sounds included. Tested in P3D v4.2 and should be ok in FSX and other P3D versions. Zip preview for images. Textures and packaged by Chris Evans

FSX/P3D Douglas DC-3 United textures for the Manfred Jahn and team C-47 v3.12. United Airlines textures by Gary Harper.

SHAREWARE: Addit! Pro is a comprehensive addon manager for Lockheed Martin's Prepar3D. Easily install, manage and remove aircraft, adventures, flights, flight plans, gauges, missions, panels, AI airport and facilities data, scenery, sounds, textures, videos, weather and more! Simple wizard-based interface makes installing and removing addons a breeze. Comprehensive addon management allows you to archive, rebuild and remove addons. Addit! Pro is fast and easy--no unzipping or file copying is necessary. Modify all aircraft, panels, sounds and scenery. Let Addit! Pro tackle the tough chores and spend your time flying. Shareware--please register to install an unlimited number of add-ons. Supports Prepar3D v4, v3, v2, and v1. By Joseph Stearns. SHAREWARE with limit on options until paid.

FSX/P3D (incl. v4) Bombardier CRJ-200 United Express package. Based at Chicago O'Hare, United Express is the regional division of United Airlines and operates under various regional airlines throughout the US. As of April 2019, United Express has 187 CRJ-200 in it's fleet. Bombardier CRJ-200 by Iris with new upgraded VC by David Hoeffgen. Includes built in FMC, working wipers and more (see VC docs in folder). High quality model. Fixed views and wheel levels. All credit to the fantastic talents of the Iris team and David Hoeffgen. Added the great textures by Andy Johnson. Tested in P3D4.2 and should work in earlier P3D versions and FSX. Other updates by Chris Evans.

Photoreal scenery of Simon Mwansa Kapwepwe International Airport (previously known as Ndola International Airport) located in Ndola, Zambia.