Messerschmitt Bf109G-4/R6 by Design Team Daedalus Unit: 2./JG3 Monchen-Gladbach, Germany May 1943 Pilot: Oblt. Detlef Rohwer The Bf 109G-4 was an incremental development of the G-2. The 1475hp DB605A engine and armament was unchanged from the G-2. The tire size increased from the previous 650 x 150 size to 660 x 160 to better handle the increasing weight of the G series. It still used the spoked wheel rims carried over from the G-2 series but the increased tire size required kidney shaped bulges to be added to the top of the wings above the wheel wells. A larger 350 x 135 tail wheel replaced the earlier 290 x 110 size. Because the larger tail wheel would not fit in the tail wheel recess, the retraction mechanism was disconnected and the tail wheel was fixed in the down position. The radio was replaced with the more powerful FuG 16Z. It was produced from September 1942 to May 1942: G-4 production = 727 G-4/trop production = 435 G-4/R3 (reconnaissance) = 80 Still, there was no “standard” G-4. Three separate companies and multiple sub-assembly production facilities were involved which inevitably produced minor variations, such as pilot head armor type, cockpit vents, tail wheel types and field added Rustsatze kits. So, each model we have created has its own unique features to portray the specific aircraft as accurately as possible. This plane was one of a great many G-4s that were equipped with the R6 Rustsatze 2x 151/20 20mm under wing gondolas as it became apparent the standard single 20mm cannon and 2x 7.92 cowl machine guns armament was inadequate to deal with their opponents. It had a flat plate pilot head armor, no cockpit vents, and the fixed tail wheel gear had no boot. Pstrany developed the models using Paul Rebuffat's Messerschmitt model - with permission - as a starting framework and updated the shape, and added a plethora of details, new parts, and ideas. Pstrany also developed the models for the drop tanks, weapons and racks. Captain Kurt created paints for each, the 2D instrument panel, the individual .dp files, the air files and the aircraft.cfg files. Mav SCASM edited each model so that they have animated wing slats, drop tanks, and other features, as well as optimizing models for the best possible frame rates. Mav also developed the idea for the 2d panel to be offset for the Revi gun sight to match the CFS2 reticle.

Messerschmitt Bf109G-4 by Design Team Daedalus Unit: 3./JG 27 Poix, France 1943 Pilot: unknown The Bf 109G-4 was an incremental development of the G-2. The 1475hp DB605A engine and armament was unchanged from the G-2. The tire size increased from the previous 650 x 150 size to 660 x 160 to better handle the increasing weight of the G series. It still used the spoked wheel rims carried over from the G-2 series but the increased tire size required kidney shaped bulges to be added to the top of the wings above the wheel wells. A larger 350 x 135 tail wheel replaced the earlier 290 x 110 size. Because the larger tail wheel would not fit in the tail wheel recess, the retraction mechanism was disconnected and the tail wheel was fixed in the down position. The radio was replaced with the more powerful FuG 16Z. It was produced from September 1942 to May 1942: G-4 production = 727 G-4/trop production = 435 G-4/R3 (reconnaissance) = 80 Still, there was no “standard” G-4. Three separate companies and multiple sub-assembly production facilities were involved which inevitably produced minor variations, such as pilot head armor type, cockpit vents, tail wheel types and field added Rustsatze kits. So, each model we have created has its own unique features to portray the specific aircraft as accurately as possible. This aircraft had a flat plate pilot head armor, and had a cockpit vent on the port side only. The tail wheel was still the smaller G-2 sized tire, the fixed down tail wheel gear had no boot, and the tail wheel bay was open. Pstrany developed the models using Paul Rebuffat's Messerschmitt model - with permission - as a starting framework and updated the shape, and added a plethora of details, new parts, and ideas. Pstrany also developed the models for the drop tanks, weapons and racks. Captain Kurt created paints for each, the 2D instrument panel, the individual .dp files, the air files and the aircraft.cfg files. Mav SCASM edited each model so that they have animated wing slats, drop tanks, and other features, as well as optimizing models for the best possible frame rates. Mav also developed the idea for the 2d panel to be offset for the Revi gun sight to match the CFS2 reticle.

esserschmitt Bf109G-4/Trop by Design Team Daedalus Unit: 6./JG27 Trapani, Sicily June 1943 Pilot: unknown The Bf 109G-4 was an incremental development of the G-2. The 1475hp DB605A engine and armament was unchanged from the G-2. The tire size increased from the previous 650 x 150 size to 660 x 160 to better handle the increasing weight of the G series. It still used the spoked wheel rims carried over from the G-2 series but the increased tire size required kidney shaped bulges to be added to the top of the wings above the wheel wells. A larger 350 x 135 tail wheel replaced the earlier 290 x 110 size. Because the larger tail wheel would not fit in the tail wheel recess, the retraction mechanism was disconnected and the tail wheel was fixed in the down position. The radio was replaced with the more powerful FuG 16Z. It was produced from September 1942 to May 1942: G-4 production = 727 G-4/trop production = 435 G-4/R3 (reconnaissance) = 80 Still, there was no “standard” G-4. Three separate companies and multiple sub-assembly production facilities were involved which inevitably produced minor variations, such as pilot head armor type, cockpit vents, tail wheel types and field added Rustsatze kits. So, each model we have created has its own unique features to portray the specific aircraft as accurately as possible. This aircraft was tropicalized with a supercharger sand filter, umbrella holder fixtures, cockpit vents on both sides, a flat plate pilot head armor, the tail wheel gear had no boot, and the tail wheel bay was open. Pstrany developed the models using Paul Rebuffat's Messerschmitt model - with permission - as a starting framework and updated the shape, and added a plethora of details, new parts, and ideas. Pstrany also developed the models for the drop tanks, weapons and racks. Captain Kurt created paints for each, the 2D instrument panel, the individual .dp files, the air files and the aircraft.cfg files. Mav SCASM edited each model so that they have animated wing slats, drop tanks, and other features, as well as optimizing models for the best possible frame rates. Mav also developed the idea for the 2d panel to be offset for the Revi gun sight to match the CFS2 reticle.

Messerschmitt Bf109G-4 by Design Team Daedalus Unit: 7./JG 52 Taman, Russia May 1943 Pilot: Lt. Alfred Grislawski The Bf 109G-4 was an incremental development of the G-2. The 1475hp DB605A engine and armament was unchanged from the G-2. The tire size increased from the previous 650 x 150 size to 660 x 160 to better handle the increasing weight of the G series. It still used the spoked wheel rims carried over from the G-2 series but the increased tire size required kidney shaped bulges to be added to the top of the wings above the wheel wells. A larger 350 x 135 tail wheel replaced the earlier 290 x 110 size. Because the larger tail wheel would not fit in the tail wheel recess, the retraction mechanism was disconnected and the tail wheel was fixed in the down position. The radio was replaced with the more powerful FuG 16Z. It was produced from September 1942 to May 1942: G-4 production = 727 G-4/trop production = 435 G-4/R3 (reconnaissance) = 80 Still, there was no “standard” G-4. Three separate companies and multiple sub-assembly production facilities were involved which inevitably produced minor variations, such as pilot head armor type, cockpit vents, tail wheel types and field added Rustsatze kits. So, each model we have created has its own unique features to portray the specific aircraft as accurately as possible. This aircraft had a 2 piece curved top pilot head armor, no cockpit vents, the tail wheel gear fixed down with no boot, and the tail wheel bay was open. Pstrany developed the models using Paul Rebuffat's Messerschmitt model - with permission - as a starting framework and updated the shape, and added a plethora of details, new parts, and ideas. Pstrany also developed the models for the drop tanks, weapons and racks. Captain Kurt created paints for each, the 2D instrument panel, the individual .dp files, the air files and the aircraft.cfg files. Mav SCASM edited each model so that they have animated wing slats, drop tanks, and other features, as well as optimizing models for the best possible frame rates. Mav also developed the idea for the 2d panel to be offset for the Revi gun sight to match the CFS2 reticle.

Messerschmitt Bf109G-4/R6 by Design Team Daedalus Unit: 7./JG54 Lille – Vendevillen France, February/March 1943 Pilot: Hptm.Waldemar Wubke The Bf 109G-4 was an incremental development of the G-2. The 1475hp DB605A engine and armament was unchanged from the G-2. The tire size increased from the previous 650 x 150 size to 660 x 160 to better handle the increasing weight of the G series. It still used the spoked wheel rims carried over from the G-2 series but the increased tire size required kidney shaped bulges to be added to the top of the wings above the wheel wells. A larger 350 x 135 tail wheel replaced the earlier 290 x 110 size. Because the larger tail wheel would not fit in the tail wheel recess, the retraction mechanism was disconnected and the tail wheel was fixed in the down position. The radio was replaced with the more powerful FuG 16Z. It was produced from September 1942 to May 1942: G-4 production = 727 G-4/trop production = 435 G-4/R3 (reconnaissance) = 80 Still, there was no “standard” G-4. Three separate companies and multiple sub-assembly production facilities were involved which inevitably produced minor variations, such as pilot head armor type, cockpit vents, tail wheel types and field added Rustsatze kits. So, each model we have created has its own unique features to portray the specific aircraft as accurately as possible. This plane was one of a great many G-4s that were equipped with the R6 Rustsatze 2x 151/20 20mm under wing gondolas as it became apparent the standard single 20mm cannon and 2x 7.92 cowl machine guns armament was inadequate to deal with their opponents. It had a flat plate pilot head armor, cockpit vents on both sides, the fixed tail wheel still had the earlier smaller tire and the fixed gear had no boot. Pstrany developed the models using Paul Rebuffat's Messerschmitt model - with permission - as a starting framework and updated the shape, and added a plethora of details, new parts, and ideas. Pstrany also developed the models for the drop tanks, weapons and racks. Captain Kurt created paints for each, the 2D instrument panel, the individual .dp files, the air files and the aircraft.cfg files. Mav SCASM edited each model so that they have animated wing slats, drop tanks, and other features, as well as optimizing models for the best possible frame rates. Mav also developed the idea for the 2d panel to be offset for the Revi gun sight to match the CFS2 reticle.

Messerschmitt Bf109G-4 by Design Team Daedalus Unit: 8./JG 52 Pilot: Oblt. Gunther Rall The Bf 109G-4 was an incremental development of the G-2. The 1475hp DB605A engine and armament was unchanged from the G-2. The tire size increased from the previous 650 x 150 size to 660 x 160 to better handle the increasing weight of the G series. It still used the spoked wheel rims carried over from the G-2 series but the increased tire size required kidney shaped bulges to be added to the top of the wings above the wheel wells. A larger 350 x 135 tail wheel replaced the earlier 290 x 110 size. Because the larger tail wheel would not fit in the tail wheel recess, the retraction mechanism was disconnected and the tail wheel was fixed in the down position. The radio was replaced with the more powerful FuG 16Z. It was produced from September 1942 to May 1942: G-4 production = 727 G-4/trop production = 435 G-4/R3 (reconnaissance) = 80 Still, there was no “standard” G-4. Three separate companies and multiple sub-assembly production facilities were involved which inevitably produced minor variations, such as pilot head armor type, cockpit vents, tail wheel types and field added Rustsatze kits. So, each model we have created has its own unique features to portray the specific aircraft as accurately as possible. This aircraft had a flat plate top pilot head armor, no cockpit vents, the tail wheel gear fixed down with no boot, and the tail wheel bay was open. Pstrany developed the models using Paul Rebuffat's Messerschmitt model - with permission - as a starting framework and updated the shape, and added a plethora of details, new parts, and ideas. Pstrany also developed the models for the drop tanks, weapons and racks. Captain Kurt created paints for each, the 2D instrument panel, the individual .dp files, the air files and the aircraft.cfg files. Mav SCASM edited each model so that they have animated wing slats, drop tanks, and other features, as well as optimizing models for the best possible frame rates. Mav also developed the idea for the 2d panel to be offset for the Revi gun sight to match the CFS2 reticle.

Messerschmitt Bf109G-4/Trop R6 by Design Team Daedalus Unit: 8./JG53 Pilot: The Bf 109G-4 was an incremental development of the G-2. The 1475hp DB605A engine and armament was unchanged from the G-2. The tire size increased from the previous 650 x 150 size to 660 x 160 to better handle the increasing weight of the G series. It still used the spoked wheel rims carried over from the G-2 series but the increased tire size required kidney shaped bulges to be added to the top of the wings above the wheel wells. A larger 350 x 135 tail wheel replaced the earlier 290 x 110 size. Because the larger tail wheel would not fit in the tail wheel recess, the retraction mechanism was disconnected and the tail wheel was fixed in the down position. The radio was replaced with the more powerful FuG 16Z. It was produced from September 1942 to May 1942: G-4 production = 727 G-4/trop production = 435 G-4/R3 (reconnaissance) = 80 Still, there was no “standard” G-4. Three separate companies and multiple sub-assembly production facilities were involved which inevitably produced minor variations, such as pilot head armor type, cockpit vents, tail wheel types and field added Rustsatze kits. So, each model we have created has its own unique features to portray the specific aircraft as accurately as possible. This aircraft was tropicalized with a supercharger sand filter, umbrella holder fixtures, cockpit vents on both sides, the tail wheel gear had no boot, and the tail wheel bay was open. It was unique in having a so called Galland head armor that became standard on the later G-5/G-6 marks. It was equipped with a Rustsatze R6 pair of 20mm under wing gondola cannons. Pstrany developed the models using Paul Rebuffat's Messerschmitt model - with permission - as a starting framework and updated the shape, and added a plethora of details, new parts, and ideas. Pstrany also developed the models for the drop tanks, weapons and racks. Captain Kurt created paints for each, the 2D instrument panel, the individual .dp files, the air files and the aircraft.cfg files. Mav SCASM edited each model so that they have animated wing slats, drop tanks, and other features, as well as optimizing models for the best possible frame rates. Mav also developed the idea for the 2d panel to be offset for the Revi gun sight to match the CFS2 reticle.

Messerschmitt Bf109G-4 by Design Team Daedalus Unit: 9./JG27 Argos in the Peloponnese, Greece July 4 1943 Pilot: Unknown The Bf 109G-4 was an incremental development of the G-2. The 1475hp DB605A engine and armament was unchanged from the G-2. The tire size increased from the previous 650 x 150 size to 660 x 160 to better handle the increasing weight of the G series. It still used the spoked wheel rims carried over from the G-2 series but the increased tire size required kidney shaped bulges to be added to the top of the wings above the wheel wells. A larger 350 x 135 tail wheel replaced the earlier 290 x 110 size. Because the larger tail wheel would not fit in the tail wheel recess, the retraction mechanism was disconnected and the tail wheel was fixed in the down position. The radio was replaced with the more powerful FuG 16Z. It was produced from September 1942 to May 1942: G-4 production = 727 G-4/trop production = 435 G-4/R3 (reconnaissance) = 80 Still, there was no “standard” G-4. Three separate companies and multiple sub-assembly production facilities were involved which inevitably produced minor variations, such as pilot head armor type, cockpit vents, tail wheel types and field added Rustsatze kits. So, each model we have created has its own unique features to portray the specific aircraft as accurately as possible. This plane was one of a great many G-4s that were equipped with the R6 Rustsatze 2x 151/20 20mm under wing gondolas as it became apparent the standard single 20mm cannon and 2x 7.92 cowl machine guns armament was inadequate to deal with their opponents. It had a 2 piece curved top pilot head armor, no cockpit vents, the tail wheel bay was faired over, and the fixed tail wheel gear had a dust cover boot. Pstrany developed the models using Paul Rebuffat's Messerschmitt model - with permission - as a starting framework and updated the shape, and added a plethora of details, new parts, and ideas. Pstrany also developed the models for the drop tanks, weapons and racks. Captain Kurt created paints for each, the 2D instrument panel, the individual .dp files, the air files and the aircraft.cfg files. Mav SCASM edited each model so that they have animated wing slats, drop tanks, and other features, as well as optimizing models for the best possible frame rates. Mav also developed the idea for the 2d panel to be offset for the Revi gun sight to match the CFS2 reticle.

Messerschmitt Bf109G-4/R6 by Design Team Daedalus Unit: Stab III./JG 3 Kuban, Soviet Union, Spring 1943 Pilot: Maj. Wolfgang Ewald The Bf 109G-4 was an incremental development of the G-2. The 1475hp DB605A engine and armament was unchanged from the G-2. The tire size increased from the previous 650 x 150 size to 660 x 160 to better handle the increasing weight of the G series. It still used the spoked wheel rims carried over from the G-2 series but the increased tire size required kidney shaped bulges to be added to the top of the wings above the wheel wells. A larger 350 x 135 tail wheel replaced the earlier 290 x 110 size. Because the larger tail wheel would not fit in the tail wheel recess, the retraction mechanism was disconnected and the tail wheel was fixed in the down position. The radio was replaced with the more powerful FuG 16Z. It was produced from September 1942 to May 1942: G-4 production = 727 G-4/trop production = 435 G-4/R3 (reconnaissance) = 80 Still, there was no “standard” G-4. Three separate companies and multiple sub-assembly production facilities were involved which inevitably produced minor variations, such as pilot head armor type, cockpit vents, tail wheel types and field added Rustsatze kits. So, each model we have created has its own unique features to portray the specific aircraft as accurately as possible. This plane was one of a great many G-4s that were equipped with the R6 Rustsatze 2x 151/20 20mm under wing gondolas as it became apparent the standard single 20mm cannon and 2x 7.92 cowl machine guns armament was inadequate to deal with their opponents. It had a 2 piece curved top pilot head armor, no cockpit vents, and the fixed tail wheel gear had a dust cover boot. Pstrany developed the models using Paul Rebuffat's Messerschmitt model - with permission - as a starting framework and updated the shape, and added a plethora of details, new parts, and ideas. Pstrany also developed the models for the drop tanks, weapons and racks. Captain Kurt created paints for each, the 2D instrument panel, the individual .dp files, the air files and the aircraft.cfg files. Mav SCASM edited each model so that they have animated wing slats, drop tanks, and other features, as well as optimizing models for the best possible frame rates. Mav also developed the idea for the 2d panel to be offset for the Revi gun sight to match the CFS2 reticle. We have all benefited from the assistance and guidance of others in the community, Special thanks to Wolfi and Huub Vink for their kind assistance and to all who have contributed their knowledge directly and indirectly.

This is the FW 190A-4 Trop. It was in full production mid 1942. The variant had 4 20mm cannons in limited numbers and 2 Mg 17's. The BMW 801 D-2 made 1700 HP with Methanol-Water injection it was boosted to 2100 HP. The 190A-4 could do 517 Kph full throttle with MW50 at Sea Level. It climbs at 2800 feet per minute. The aircraft comes with weapons which are according to researched configurations. The A-4 actually had 12 aircraft that carried torpedoes!! The model itself does not have a tailhook but I programmed one in aircraft.cfg so you can fly carrier missions. There is also GPS and autopilot.