Prepar3d > Helicopters > Page 2
![MD Helicopters MD500 Version 2](https://static.simviation.com/NDERSMD500P3DV2.gif.jpg-thumb.jpg)
336.65Mb (299 downloads)
MD Helicopters MD500. Features 22 exterior models, virtual cockpit, maximum moving parts, specular mapping, bump mapping, PBR mapping and more. Based on the original models by Nemeth Designs. By Eagle Rotorcraft Simulations
Posted Aug 5, 2023 09:49 by George Arana
![FSX/P3D CAF CH-118108 Rescue_Milviz UH1H Redux HDH1H Redux Textures](https://static.simviation.com/RESCUE 3.jpg-thumb.jpg)
11.00Mb (154 downloads)
This is a detailed paint of CAF CH-118108 Iroquois Rescue helicopter as it appeared at CFB Cold lake AB back in the 70's.In this painting I have upgraded the outlines, hardware, panels etc.as well as added items such as the engine oil cooler (belly), skid tube attach screws etc.for a more finished look.The instrument panel was also upgraded as well.
Milviz
UH1 Redux (FSX/PdD4+)
Posted Jul 10, 2023 04:27 by Bruce G Miller
![FSX/P3D Milviz UH1H HD Okanagan Helicopters Textures](https://static.simviation.com/OK 2.jpg-thumb.jpg)
11.29Mb (109 downloads)
This is a paint of C-GOKR as it appeared back in the 70's. In this painting I have upgraded the outlines, hardware, panels etc.as well as added items such as the engine oil cooler (belly), skid tube attach screws etc. for a more finished look. The instrument panel was also upgraded as well. Okanagan Helicopters Started in 1947 with one, 2 seater helicopter, a Bell 47-B3, CF-FZX, and 3 employees. Carl Agar, ex RCAF flight instructor, Alfred "Alf" Stringer, a 25 year old airplane mechanic, ex RCAF, and Arnold "Barney" Bent, ex RCAF flight Instructor, started the Company as a Crop Dusting Operation in Penticton. By Dec 1958 they had 54 helicopters. By the 70's they became one of the worlds largest companies and operated aound the globe. I was fortunate enough to be employed by them as an Engineer for many years.
Milviz
UH1 Redux (FSX/PdD4+)
Posted Jun 17, 2023 16:50 by Bruce G Miller
![FSX/P3D Canadian Helicopters_Milviz UH1 Redux HD Textures](https://static.simviation.com/CDN-1.jpg-thumb.jpg)
![FSX/P3D Canadian Helicopters_Milviz UH1 Redux HD Textures](https://static.simviation.com/CDN-2.jpg-thumb.jpg)
8.71Mb (112 downloads)
This is a detailed paint of Canadian Helicopters C-FCDN, a ficticious paint as no 205's flew under this color...as far as I know, and as long as I worked for the Company. Canadian Helicopters is a large Company operating across canada and overseas.in this painting I have upgraded the outlines, hardware, panels etc.as well as added items such as the engine oil cooler (belly), skid tube attach screws etc.for a more finished look.The instrument panel was also upgraded as well.
Milviz
UH1 Redux (FSX/PdD4+)
Posted Jun 13, 2023 01:42 by Bruce G Miller
![FSX/P3D Bell 407 Firefighting Pack](https://static.simviation.com/satoReleases.png-6.jpg-thumb.jpg)
18.42Mb (521 downloads)
This addon requires the recently released as freeware Milviz Bell 407 and Lorby's FireFighterX Application to attach firefighting assets to the helicopter for aerial firefighting operations. This pack comes with two USFS contract repaints representing N911FS, aka H535 based at Keenwild Station in the San Bernardino National Forest in Southern California. The other represents N922FS, which was contracted for the State of Wyoming's Helitack Program. N911FS represents a rare 245 gallon equipped external tank and N922FS a more traditionally seen 210 gallon bambi bucket. Repaints are compatible with both FSX and P3D, but the firefighting assets are only compatible with P3Dv4.4 or higher due to sim limitations. Firefighting asset models and repaints by Nicholas Mitchell.
Posted May 16, 2023 14:52 by Nicholas Mitchell
![P3Dv4+ Milviz UH-1 Water Tank](https://static.simviation.com/satoReleases.png-5.jpg-thumb.jpg)
0.11Mb (115 downloads)
This addon was specifically created to be attached to the Milviz UH-1H using Lorby's FirefighterX Client. Without this client, the tank cannot be attached to the helicopter. The Simplex Aerospace 360 gallon water tank was installed on many versions of the Bell 205/UH-1 Huey in aerial firefighting. The version represented here, is the one seen on Cal Fire UH-1 Super Hueys. By Nicholas Mitchell.
Milvitz
UH1 Redux (FSX/PdD4+, external link - bottom of page)
Posted May 8, 2023 22:54 by Nicholas Mitchell
![FSX/P3D Virtavia CH-46 Sky Aviation Texture Pack](https://static.simviation.com/satoReleases.png-3.jpg-thumb.jpg)
7.69Mb (307 downloads)
This pack represents ships N461WY and N462WY flown by Sky Aviation of Wyoming in aerial firefighting operations. This repaint pack is specifically for Virtavia's recently released freeware CH-46 Sea Knight. Textures have been increased to 4k as well. Repaints by Nicholas Mitchell "Scorch00"
Required files:
required file
Posted May 6, 2023 15:33 by Nicholas Mitchell
![FSX/P3D Boeing CH-46 Sea King package](https://static.simviation.com/FSX P3DBoeing CH-46_sea_king2 -1.jpg-thumb.jpg)
21.96Mb (903 downloads)
The CH-46 was first introduced in 1964 as a dual rotor utility medium lift helicopter. Over 600 airframes were built, serving mainly with the USMC and USN, export versions were sold to Sweden, Japan and Canada, these variants differ in having larger balloon floats. Civilian versions have been operated by New York airways and PAN-AM. Former payware by Virtavia
Posted May 5, 2023 12:53 by virtavia
![FSX/P3D VIH Helicopters Milviz UH1H Redux HD Textures](https://static.simviation.com/VIH-3.jpg-thumb.jpg)
11.20Mb (146 downloads)
This is a detailed paint of Vancouver island Helicopters' C-FVIH as was based with VIH, Of Sidney BC, Canada,some years ago.I have upgraded the outlines, hardware,panels etc. as well as added items such as the engine oil cooler (belly), skid tube attach screws etc.for a more finished look.The instrument panel was also upgraded as well.
Milviz
UH1 Redux (FSX/PdD4+, external link - bottom of page)
Posted May 5, 2023 11:56 by Bruce G Miller
![FSX Evergreen Helicopters_Milviz UH1H redux HD Textures](https://static.simviation.com/EVRGN 3.jpg-thumb.jpg)
9.64Mb (139 downloads)
This is a repaint of Evergreen's 205, Registration N4750R as it appeared a few years ago.As the original Milviz outlines of the hardware,panels, doors etc were very weak I went over them and brought them out to give them a more realistic appearance.likewise the instrument panel was upgraded as well.Many detailed addons.
Milviz
UH1 Redux (FSX/PdD4+, external link - bottom of page)
Posted Apr 27, 2023 00:39 by Bruce G Miller