Flight Simulator First Officer (FSFO) V3 is a generic copilot designed to work with aircraft that conform to Xplane (via XPUIPC), FS9, FSX and P3D SDK; in short, it adds a touch of realism while providing a copilot to share cockpit responsibilities. FSFO V3 does not require strict adherence to Standard Operating Procedures (i.e. scripts), reading lengthy manuals or precise speech. To that end, it can be as complex or simple as you want; for example, FSFO can complete the entire Before Start Checklist, or only those functions you chose not to accomplish. Regardless, he will check every switch to ensure it's placed in the correct position. Just hit connect and fly with confidence that your First Officer is helping you fly your complicated aircraft.

FSTrampFree 7.26 for P3D, FSX, FSX-SE, X-Plane 11 FSTrampFree is a moving map and derived from the flight management system FSTramp. It shows, without internet access, the world map with mountains, airports, navigation aids and aircrafts. In addition to the mouse pointer, the surface elevation is displayed. The app is an integrated module for the simulator and can be activated by pressing Ctrl+F12. Use the context menu to move the aircraft to any point in the world.

Gate A Nator is a freeware pre-flight tool for FSX and Prepar3D that allows to customize a flight plan before starting a flight simulation session. Can set departing Gate position and can load flight plans from FSX/FS2004, Prepar3D, LEVELD, PMDG, Quality Wings and Flight Sim Commander, or from an ICAO route, and using Airac cycles (FSBuild2 format) to read navaids from. Installation package installs Airac Cycle 1904, that can be after updated from Navigraph. Gate/parking database is auto created and updated from FSX or Prepar3D scenery base. It supports file save and export to FS2004, FSX, Prepar3D, LEVELD, PMDG, Quality Wings, Flight Sim Commander, XPlane 11 and Aerosoft Airbus/X extended. Complete instructions guide is included in the help file.

P3D FS2004 FSX Flight Analyzer Utility V5.10 Flight Data Recorder - Logbook. NOW also P3D supported. Very easy to use, just make a flight plan in the simulator or in this utility. What this program does: - quickly change the settings of FSX/Fs2004, such as time, date, fuel, weight, traffic etc. - start a failure sytem, such as gear, flaps, engine, etc. - freeze the time, so you can fly in a for everlasting sunset. - runway detecting system to see wich runways are in use. - flight analyzing/data recording from departure to parking at the gate. - When flight analysis is finished you can print a report, the report is automaticly saved as pdf File. - graphical landingchart. - record all your flights - quickly look to your FSX display settings (only FSX) and change them even before the flight simulator is running. - After a flight is finished FsQC saves your flight automaticly as 'FsQC last Flight', so you can continue the next day or hour.

SHAREWARE: Addit! Pro is a comprehensive addon manager for Lockheed Martin's Prepar3D. Easily install, manage and remove aircraft, adventures, flights, flight plans, gauges, missions, panels, AI airport and facilities data, scenery, sounds, textures, videos, weather and more! Simple wizard-based interface makes installing and removing addons a breeze. Comprehensive addon management allows you to archive, rebuild and remove addons. Addit! Pro is fast and easy--no unzipping or file copying is necessary. Modify all aircraft, panels, sounds and scenery. Let Addit! Pro tackle the tough chores and spend your time flying. Shareware--please register to install an unlimited number of add-ons. Supports Prepar3D v4, v3, v2, and v1. By Joseph Stearns. SHAREWARE with limit on options until paid.

New version: Updated installer and auto-update functionality along with chart downloaded changes to support browser updated security measures. FS Flight Builder is a utility for general aviation flying that will build flight files for FSX (flt), FSX Steam Edition (flt), and Prepar3D (fxml) based on waypoints and other data either entered manually or imported from SkyVector using the Plain Text Link information. Among other things, you can select your starting position, aircraft, and VFR or IFR flight plan. One of the most interesting features of the application is that it will include a Briefing file, added to the aircraft's built-in kneedboard, that will include departure and destination airport information (runways, frequencies, weather, and charts) as well as navigation frequencies along the route. Have you ever started up flight simulator and wondered “where do I want to go today”? The new Destination Chooser functionality can help to solve that problem. The screen allows you to enter your departure airport and choose various parameters for your destination (like min and max distance, tower availability, ILS availability, runway length requirements, etc.). How to install: Run Setup.exe and simply follow the installation wizard. When you run the application for the first time (make sure your flight simulator is not running), it will build the database from your flight sim data. Be patient. It could take a few minutes. It will attempt to locate your flight sim folder and flight plan folders automatically. If it can't find them, however, you'll need to select them from the options menu. IMPORTANT! Because FS Flight Builder saves to your Flight Sim directories, it MUST be run in Administrator mode. To do this, right-click on the desktop icon, select the Compatibility tab, and check the Run as administrator checkbox. IMPORTANT! The airport and navaid databases for FS Flight Builder are built using Peter Dowson's excellent Make Runway utility and the equally excellent BGL2XML utility from ScruffyDuck Software. The links to these utilities are below. They must be added to the main FSX or Prepar3D folder. Peter Dowson's website: http://www.schiratti.com/dowson.html ScruffyDick Software website: http://www.scruffyduck.org/bgl2xml/4584282773 It's also important to note that Version 1.7 of BGL2XML is required for Prepar3D V3 and higher. Author: Tom Arduini The latest installer can always be found at http://www.arduiniwebdevelopment.com/fsflightbuilder/fsflightbuilder.zip

Demo - Free for limited time use. Addit! Pro is a comprehensive addon manager for Lockheed Martin's Prepar3D. Easily install, manage and remove aircraft, adventures, flights, flight plans, gauges, missions, panels, AI airport and facilities data, scenery, sounds, textures, videos, weather and more! Simple wizard-based interface makes installing and removing addons a breeze. Comprehensive addon management allows you to archive, rebuild and remove addons. Addit! Pro is fast and easy--no unzipping or file copying is necessary. Modify all aircraft, panels, sounds and scenery. Let Addit! Pro tackle the tough chores and spend your time flying. Shareware--please register to install an unlimited number of add-ons. Supports Prepar3D v4, v3, v2, and v1. By Joseph Stearns.

FSX/P3D (incl. v4) Boeing 727-100 United Airlines 'Friend Ship' package with VC. United Airlines is the world's 3rd largest airline and began in 1926 by Walter Varney as an air taxi sercice and trading as Varney Air Lines. United operated the Boeing 727-100 between 1963 and 1993 when they were replaced with Boeing 737-500. Boeing 727-100 model by TDS/ Tenkuu Developers Studio with Thomas Ruth 727 VC added. Includes utility for ground services, Passenger bus, cargo, stairs, refuelling truck etc (find it under - Views - Instrument panel - Util) The wonderful native FSX Boeing 727-100 from TDS will be enjoyed by many more people who do not know how to install a VC into a FSX native model. The VC includes working wipers, Honeywell FMC and more. See Panel manual for more info. I have used the great realistic textures by Luis Castro. Thomas Ruth VC added and aircraft.cfg edited to allow correct VC views and wheel levels. Assembled and prepared for P3D/FSX by Chris Evans.

FS Flight Builder is a utility for general aviation flying that will build flight files for FSX, FSX Steam Edition, and Prepar3D based on waypoints and other data either entered manually or imported from SkyVector using the Plain Text Link information. Among other things, you can select your starting position, aircraft, and VFR or IFR flight plan. One of the most interesting features of the application is that it will include a Briefing file, added to the aircraft's built-in kneeboard, that will include departure and destination airport information (runways, frequencies, weather, and charts) as well as navigation frequencies along the route. Have you ever started up flight simulator and wondered “where do I want to go today”? The new Destination Chooser functionality can help to solve that problem. The screen allows you to enter your departure airport and choose various parameters for your destination (like min and max distance, tower availability, ILS availability, runway length requirements, etc.).

NpC4FSX&P3D (NumberPadControl) is a more efficient (and more convenient to set up) version of a similar program called NumberPadControl that I wrote a few years ago and which to my surprise PC Pilot magazine included on their 100th Anniversary edition Freeware CD. With NpC4FSX&P3D you assign keys to functions like Com, Nav, Heading, Course, Altitude, VS, Autopilot functions, etc., and then can enter the associated values just by typing on the keyboard’s numberpad instead of fiddling with elusive mouse click spots. NpC4FSX&P3D is programmed primarily for aircraft with avionics that were developed within standard FSX programming guidelines but also supports third party add- on aircraft such as the Flysimware L35A and MU2, PMDG 737NGX / B777, Flight1 King Air B200, A2A Cherokee 180, and also works with GPS units like the GTN750. Setup manual included. A registered (payware) copy of FSUIPC is required.