The Vought F7U Cutlass was a United States Navy carrier-based jet fighter and fighter-bomber of the early Cold War era. It was a highly unusual, semi-tailless design, allegedly based on aerodynamic data and plans captured from the German Arado company at the end of World War II. Regarded as a radical departure from traditional aircraft design, the Cutlass suffered from numerous technical and handling problems throughout its short service career. The type was responsible for the deaths of four test pilots and 21 other U.S. Navy pilots. This is an FSX update of the FS2002/2004 model deigned by RanchoJen models and features a modified 2D panel and a highly detailed static VC (non-functional gauges). Automatic smoke and afterburner effects added. Credits go to the designers mentioned above, whom I've tried to ask their permission for this update but their E-Mail as well as the link mentioned in their readme is invalid anymore. Modified 2D panel, new static VC as well as effect configuration by Michael Pook.

Raytheon/Beechcraft T-6A Texan II of Argentine Military Flying School (Escuela de Aviacion Militar) textures only.You will need to download the IRIS Simulations T-6A Texan II freeware irisclassicst6.zip for this(X payware) from Simviation's FSX Military pages for thos.Both pilot figures are animated.Smoke effects wing contrail detailed VC and 2D panels.Main textures are in 2048 px DDS 5 mode for higher resolution.By Yiannis Katehis Tsetsas 2018.File size (8.78 MB)

Mitsubishi F-2A/B for FSX and P3Dv5 The Mitsubishi F-2 is a multirole fighter derived from the General Dynamics F-16 Fighting Falcon. Thank you for downloading. About the model This model has been created to conform to FSX and P3Dv4. For P3D we have not tested with V1 V2 V3. As for P3D use, there are also sides that we have not yet managed to grasp P3D, Please note that it may not be the best model. Current VC is F-2A and F-2B are both single-seat VC. In short, F-2A's VC is used for F-2B. Also, we can not do engine start operation at VC. Please use Ctrl + E to start the engine. By Team KBT

Mitsubishi F-2A/B for P3Dv5 V1.2. The Mitsubishi F-2 is a multirole fighter derived from the General Dynamics F-16 Fighting Falcon. Thank you for downloading. About the model This model has been created to conform to FSX and P3Dv4. For P3D we have not tested with V1 V2 V3. As for P3D use, there are also sides that we have not yet managed to grasp P3D, Please note that it may not be the best model. Current VC is F-2A and F-2B are both single-seat VC. In short, F-2A's VC is used for F-2B. Also, we can not do engine start operation at VC. Please use Ctrl + E to start the engine. By Team KBT

Royal Canadian Air Force Lockheed CP-140 Aurora for FSX and P3Dv4. Adrian Brausch precisely repainted CP-140 Aurora with high resolution, and Team FS KBT created a special model. This model of Block 1 specification created wingtip Radomes and antennas in detail. 5 types of painting including special painting can be enjoyed. Although models are included, many textures, gauges and sounds read the P-3C Orion FSX. Therefore, P-3C Orion FSX is required. ("P-3C ORION FSX" created by us can be displayed on P3Dv4.) Team FS KBT with Adrian Brausch

FSX/P3D Gloster Meteor U Mk.16 The Gloster Meteor U Mk.16 was an unmanned target drone based on the F Mk.8. This was the second drone to be based on the Meteor, after the U Mk.15, which had been based on the F Mk.4. The first prototype U Mk.16 flew on 22 October 1956, the last U.16 conversion was made as late as 1972. This model represents Gloster Meteor U.16 WK800 ,belonging to the RAE at RAF Llanbedr. Native FSX/P3D (works in v4) model by A.F.Scrub

The Douglas X-3 Stiletto was a 1950s United States experimental jet aircraft with a slender fuselage and a long tapered nose, manufactured by the Douglas Aircraft Company. Its primary mission was to investigate the design features of an aircraft suitable for sustained supersonic speeds, which included the first use of titanium in major airframe components. This is a new enhanced FSX update of the X3, previously updated by uploader. Textures and panels have been entirely reworked to make them look crisp and fresh and the panels have been equipped with new more realisic gauges. Automatic smoke and burner effects added. All in all, for those who love this awesome aircraft, this is a must-have. Thanks to Kazunori Ito for the original model, to E.J. Wells for his texture enhancements, to Erwin Welker for the 2D panel yoke and to Philippe Wallaert for many of the gauges. New panel configuration, vc light and smoke and burner configuration by Michael Pook.

P3D V3 & 4 / FSX North American OV-10A USMC twin package. these 2 represent VMO1 with green camoflouged paint that the OV-10's wore in the mid eighties up until Desert Storm and VMO-1, MCAS New River N.C. Tim Conrad original OV10D converted to FSX native format by LLS and OV-10A texture conversion by Chris Evans. Textures by John Detrick. Uses VC/panel conversion by Danny Garnier. North American Rockwell OV-10 Bronco is a twin-turboprop light attack and observation aircraft made in the US between 1965 and 1986. The OV10 Bronco is still in use today. Included engine sounds. Adjusted wheel levels and eyepoint. Assembled and edited by Chris Evans. Tested only in P3Dv4 but should be ok in FSX and earlier P3D versions.

P3D >V4/FSX North American OV-10A 20th TASS, Danang, South Viet Nam 1969 package. Tim Conrad original OV10D converted to FSX native format by LLS and OV-10A texture conversion by Chris Evans. Uses VC/panel conversion by Danny Garnier. North American Rockwell OV-10 Bronco is a twin-turboprop light attack and observation aircraft made in the US between 1965 and 1986. The aircraft is still in use today. Included engine sounds. Adjusted wheel levels and eyepoint. Assembled and edited by Chris Evans. Tested only in P3Dv4 but should be ok in FSX and earlier P3D versions.

P3D 3/4 /FSX Bombardier E-11a Sentinel R1 and Global Express Military Pack (revised). USAF E-11A serials 11-9001 (R1), 11-9355 (GLEX), 11-9358 (GLEX) and 12-9506 (GLEX) Package. The BD-700 has carried the High-Altitude Lidar Operational Experiment (HALOE) in order to survey large areas rapidly. FSX Native model by Iris with added enhanced new upgraded VC by David Hoeffgen , includes built in FMC, working wipers and more (see VC docs in folder). Added the high quality textures by S Peterson. Includes custom sounds. Refined flight dynamics for a super smooth flight. High quality model with opening doors and stairs. Updates by Chris Evans.