Super Etendard textures only representing French Air Force 1979 1990. Requires the the Super Etendard by Romain Lucas.By Kergariou Geoffrey

Super Etendard Catapult Update for FSX Acceleration - to allow the catapult on the Carrier. By Kergariou Geoffrey

FS2004/FSX RAAF F/A-18F SuperHornet Effects. Afterburner and Vetrail effects for the Royal Australian Air Force F/A-18F SuperHornet for FS9 and FSX By Barry Magann.

Prototype 01 textures only for the Super Etendard of Romain Lucas, updated for FSX.

Dassault Super Etendard Inclusive Package. The Dassault-Breguet Super Etendard (French for "battle standard") is a French carrier-borne strike fighter aircraft designed for service with the French Navy. This model of the Super Etendard was created with GMax for FS2002 with panel updates so now this beautiful design works in FSX. As it was created with GMax, all displays, glass, etc, are OK. The VC has some areas that are uneditable but all editable areas have been updated with FSX compatible gauges. 2d panel also fully updated. Original Credits: Romain Lucas, Eric Marciano, Frank Safranek Great thank you to the original designers and painters. Updated for FSX by Danny Garnier.

Lockheed C-141 Starlifter. Updated Mike Stone C141. No VC. Uses the default 747 panel. This aircraft can be flown by almost anyone, but experienced simmers will realize that the climb rate on take-off should not exceed 1,000 f/m at 150 KIAS or less. If autopilot take-off is used, climb rate will be 2,000 f/m, and will drag the tail. Set your take-off climb rate to 1,000 f/m, then increase to 2,000 f/m at about 2,000 ft AGL. Otherwise, all ILS controls work, and long distance cruise should be at FL400W or FL410E at mach .74 - .80. All flight dynamics have been reworked based on real-world data. Please let me know if anything does not work right in the dynamics. Do not report to me problems that are not flight dynamic related! Douglas E. Trapp FS Flight Dynamics Engineer

A repaint of VFA-37 Ragin' Bulls F/A-18C Hornet textures only for the Acceleration default F-18.

FSX Mitsubishi F-1 Package Inclusive. This is a revised edition. Mitsubishi F-1 Supporting fighter Package. This model includes updates and fixes. The Mitsubishi F1 Supporting fighter, which is similar in configuration to the Jaguar, is the combat version of the T-2 trainer. The model of four variations of Bomb(Mk82), DropsTank, Missile(ASM-1 and ASM-2), and Normal and the model for AI are a set. Gauge control was attained in the photoreal virtual cockpit. It is full automatic, and it ejects and a drag shoot is stored. Model design by Daisuke Yamamoto Peinted by Hiroaki kubota (KBT) Effect xml gauge is made by Toshikazu Shimizu. Adapted to work OK in FSX by Danny Garnier. Panel made useable without errors with FSX compatible gauges.

Original FS2004 model by Mike Stone + RAF repaint by Christopher Martin. Updated for FSX by Douglas E. Trapp, FS Flight Dynamics Engineer. No VC and uses default 747 2d panel only.

YF-16 Viper Inclusive. This is a repackaging of Kirk Olsson's excellent YF-16 vipers (yf16viper.zip) with Scott Prinz's 2D HUD and Danny Garnier's VC. Now you can read your highest indicated air speed in knots, highest MACH speeds, altitude, and altitude above ground in both the 2D HUD and the VC HUD. THE PANEL CAN BE USED IN ANY KIRK OLSSON VIPER, F-16C and F-16D. YF-16 is the prototype for the F-16C and was chosen by the Air Force over the YF-17 due to faster acceleration, climb, and better cruise speeds. The YF-17 was chosen by the Navy to become the F/A-18C.