7.59Mb (214 downloads)
This gauge has been developed for FSX Flight Simulator Acceleration. It should also work with FSX SP1/SP2 . The functionality of this gauge is based on the Rockwell Collins HGS which is designed for the B737NG . It works correct for FSX B737-800 models only !! The gauge has been developed as close as possible according to the HGS Pilot Guide from Rockwell Collins for normal operations. The HGS can be used during all phases of flight from takeoff to landing. This can include Ground Roll Guidance, all enroute operations and either non-precision or precision approaches. This gauge is very realistic. It supports the pilot particular during approach operations to meet always precise the runway touch down zone by keeping a 3° glide slope angle. Even for a visual approach maneuver the HGS supports the pilot to establish and maintain the aircraft on the proper glide path to the runway without reference to a ground based landing system like ILS. Technical descriptions and installations guide are included in the zip file for further information. Look at video also : https://youtu.be/mw4Q_eOWYtk By Dietmar Loleit
Posted Nov 7, 2019 07:53 by Dietmar Loleit
14.39Mb (411 downloads)
FSX/P3D Brown/cream tinted cockpit textures for Boeing 757 and B767 and other aircraft using the Boeing 737-800 VC. I have tried to edit the textures of the default 737 VC to more simulate the colours of a Boeing 757 or 767. If you don't like them reverting to the default is easy - just replace with the original vc textures. So I have edited the default textures to give a more realistic feel. Enclosed images for comparison. You can simply over-write your existing images
Posted Jun 10, 2019 08:14 by chris evans
26.90Mb (266 downloads)
Not a must but since I fly this plane frequently in FSX, some things has accumulated over the last 12 months, which I have reworked bit by bit! So here is an updated Version of the standard panel for this Mod! For more info please read the documentation files! Tested only in FSX & Acceleration! Have fun!
Required files:required file
Posted Jun 9, 2019 06:38 by Andiroto
18.33Mb (1663 downloads)
FSX/P3D More realistic cockpit textures for the Boeing 737- and other aircraft using the Boeing 737-800 default (incl. enhanced) VC textures. I fly regularly and when boarding and exiting the aircraft usually the cockpit door is open and it's a treat to see the real 737 cockpit just feet from my eyes. It has struck me that the default textures are to bright grey compare to what I have seen. I googled for images and sure enough most of the later cockpits, including Boeing Max, seem to have dark grey colour. I have edited the default textures to give a more realistic feel. Also includes 737 panel with retouched instruments. Included real cockpit images for comparison. Chris Evans
Posted Jun 6, 2019 05:16 by chris evans
0.05Mb (133 downloads)
Simplified problematic lights with static images. Also I may have had mixed up images for transparent and non transparent switches. Please read the readme for instructions pertaining to proper mixture lever settings for use. Again, original keyboard version also included.
Posted Jan 31, 2019 12:29 by Brett Clearwaters
6.10Mb (882 downloads)
Adds automation to the fantastic Synthetic ILS developed by Karol Chlebowski for both glidepath and glideslope. Besides the automated ILS there is automated approach capability starting from about 15 miles from touchdown through landing. An automated takeoff function is also available. This was tested and worked on both P3D and FSX. Not tested on FS 2004.
Required files:required file
Posted Jan 26, 2019 02:47 by Bill McClellan
1.73Mb (1693 downloads)
More than 10,000 virtual pushbacks were done by previous versions of this panel. It's time to upgrade to v3.0! Planning an international flight to Eastern Europe or Russia? Version 3.0 has an additional Pushback Truck Switch Panel that makes it possible to choose between English and Russian groundcrew to use both in one flight. You can still use a standalone panel either English or Russian like in versions v1.0 and v2.0. Includes Brake Sound FX. Supports FS9, FSX, and all versions of P3D including v4.0 and later. Based on Groundhandling gauges by Rob Barendregt and Doug Dawson's XML Sound Gauge. The panel is intended for aircraft Pushback procedures. NOTE: Before installing the version v3.0 it's recommended to remove all previous versions of the Pushback Panel. The panel review: https://youtu.be/_DCAzLg-w2k
Posted Jan 15, 2019 08:28 by uploader
23.27Mb (873 downloads)
This is a new panel for the Boeing 727-200 in 2D which includes a fully functional main panel, overhead panel, pedestal, and flight engineer's panel. It is based on the Boeing Airplane Operations Manual and is as close as possible to the real aircraft. It is designed to work on 1920X1080 monitors but should stretch to other sizes. It includes a full instruction manual and also cockpit sounds. There is a Virtual Cockpit which works on the Thomas Ruth FSX/P3D model only. Please read instructions before trying this panel.
Posted Jan 3, 2019 14:14 by G. Munro
0.05Mb (122 downloads)
Automixture Switch for panels using Bjorn Kesten's excellent code for automix calculation. By his permission to freely distribute or modify. Select for either auto rich while climbing or auto lean for cruising. Indicator lights to show which mode is active.
Posted Dec 24, 2018 09:26 by Brett Clearwaters
18.94Mb (1291 downloads)
This is an extensive rewrite of my Boeing 737-800 panel published in 2015. It includes a lot of new features including a working HUD, a Yoke, a new fully functional Overhead panel, upgraded gauges, a cockpit sounds package, and a VC panel. It is designed for 1020X1080 (16:9) monitors although will work on other sizes with some distortion. It is tested on FSX and should also work on P3D. As always please read instructions.
Posted Nov 18, 2018 13:24 by G. Munro