0.06Mb (948 downloads)
Adds stock style kneeboards to Project Airbus A318, A319, A320IAE, A320CFM, and A321 models, including accurate V-speeds, approach speeds, and flap placard speeds taken from Airbus literature for the different models.
Posted Feb 23, 2017 19:08 by Simon Kelly
3.32Mb (1372 downloads)
This file does not work in Windows 10. This is the G1000upFSX_v49 the new version of my G1000 upgrade. Users of the previous version only need to replace the previous G1000.cab folder by the new one. In this version the previous FD bars are replaced by a single one which is more realistic. There are also some changes in the AP information display. The Garmin G1000 for FSX is a high performance instrument panel for a simulator. However the PFD of the default version misses a lot of important features like the NAV/DME display, autopilot commands with vertical speed setting, autopilot information display, selected vertical speed display, flight director bar, a radio altitude display and a wind information display. Since version 48 and above the HSI is slightly modified: NAV1 and/or NAV2 needles are displayed in light blue color below the active HSI needle i.e. if NAV1 is selected in the HSI the NAV1 needle will show up in green (default) and NAV2 needle will be displayed in light blue below it. The RALT display does not show up when the aircraft is on ground. The ILS flags are now diplayed in the small Inset map. In the situation where the wind direction changed between 0 and 335 (anti-clockwise) the WIND heading was displaying negative degres, this has been corrected The MFD only misses the autopilot commands and the ILS flags in the GPS map. All these features are added in my Garmin G1000 upgrade for FSX v49. Two display bugs in the FSX default G1000 are also corrected. First a NAV and LOC confusion on the HSI rose when NAV2 is displayed. Second the clock that turns to the next minute at 30 seconds instead of 60 and turns to the next hour at 30 minutes instead of 60. By default in FSX the G1000 panel is available on the Cessna C172, the Beechcraft Baron B58 and the Mooney Bravo. Installation information is enclosed in the "G1000upFSX_v49_users_guide.pdf" file in this download. If you are not familiar to the G1000 panel it is strongly recommended to read the manuals located in the “Documentation” folder of this download. December 2016, by M. Ravez
Posted Dec 29, 2016 10:37 by M. Ravez
24.50Mb (912 downloads)
Tested only with the package by Philippe Wallaert but should also work which are based on the original Concorde upload by LIBARDO GUZMAN! For a overview of the systems, please go to the zip preview and take a look in the info picture! Many thanks to LIBARDO GUZMAN for his great Concorde sim, Phillipe Wallaert for his package and the CG gauge i have used for my panel and a very special thanks to John Honniball for his really nice flight engineer station photo of the Concorde! Tested only in FSX + Acceleration!
Required files:required file
Posted Sep 30, 2016 19:25 by Andiroto
7.56Mb (3440 downloads)
There are a few A32x panels around however this one attempts to provide comprehensive functions according to the Airbus A320 Operations Manual. Features include all new gauges tailored to the A320, a full set of display panels, Overhead and main panels that closely reflect the actual flight deck, night lighting, and the latest version of my GPS to replace the default GPS 500. It is designed for a 1920X1080 monitor but will scale to other sizes although lettering may not be legible. PLEASE READ INSTRUCTIONS before deciding it does not work.
Posted Sep 22, 2016 21:59 by G. Munro
25.40Mb (4074 downloads)
A320, A321, a319 2d panel for FSX. Merged different panels to form one panel. Panel includes -TCAS on MFD -Terrain on MFD -Flight plan on MFD click ''Lower left or right'' -Added flight data gauge -changed colors on EICAS Display -Added Honeywell FMS -Check list gauge -Autoland gauge -Edited the GPWS ---------- Panel assembled with thanks to the creators and gauge designers. Chris Jeanne, Ken Wigginton, Francois Dore, Nick Pike, Project Airbus and others. Please read the Readme!
Posted Sep 20, 2016 18:46 by Jason Alexander
8.26Mb (432 downloads)
A 2D panel designed around default gauges and using a previously approved for modification bitmap by Roger Lowrey for CFS1 back in 2003. It is intend as a source panel for updating old Lancasters that may suffer from unusable/nonworking gauges but otherwise work perfectly in FSX. The panel is freeware and can be uploaded to any web site without further approval provided no money is charged for the outcome. As is usual, you use this product at your own risk. Panel by Ross McLennan
Posted Aug 11, 2016 06:18 by Ross McLennan
1.61Mb (3441 downloads)
This new version of the GPS 500 Replacement Gauge has no change in functionality but primarily has a workaround for a significant FSX flaw which causes a system crash when flying in the vicinity of 180 degrees of longitude (See manual for full details). There are a few other minor changes: tidying up the formatting, correction of blank screen on runways, and updates to the manual.
Posted Mar 29, 2016 20:27 by G. Munro
0.17Mb (7333 downloads)
FSX 2D Cabin Window Panel for use with wing views in FSX. As we all know, FSX doesn't provide this function, so I came up with a solution that can make this feature available. This is a fixed pop up 2D panel window that can be used as an overlay panel in 3D wing view mode in FSX.
Posted Jan 26, 2016 21:18 by wesley c coons
1.58Mb (3433 downloads)
This gauge is intended to replace the Garmin GPS 500 and includes virtually all the functions of that gauge plus many more. This release contains what is hopefully the last function from the Garmin GPS 500 which has not previously been included: Approach Transition Selection. Also includes a few small bug fixes including wind indicator backwards and some distance anomalies. Please read instructions.
Posted Jan 2, 2016 03:50 by G. Munro