59.32Mb (1423 downloads)
FSX/P3D ATR42-600 Aeromar. Aeromar is a Mexican airline based at Mexico City Licenciado Benito Juarez and currently operate 12 ATR-42 aircraft flying to destinations around Mexico, Latin America and the USA.
Model and VC by Virtualcol. Ex payware.
Textured and assembled for P3Dv5 and should be ok in FSX and earlier P3D versions by Chris Evans.
Posted Nov 7, 2020 08:19 by chris evans
19.26Mb (1368 downloads)
FSX/P3Dv4,V5 Cessna 172C Skyhawk
The Cessna 172 Skyhawk is an all-metal, single-engine, four-seat, high-wing light utility aircraft, produced by Cessna Aircraft Company between 1958 and 1962. Early 172s were similar in appearance to the 170s, with the same straight aft fuselage and tall landing gear legs, although the 172 had a straight tailfin while the 170 had a rounded fin and rudder. In 1960, the 172A incorporated revised landing gear and the swept-back tailfin, which is still in use today. Native FSX/P3Dv4,v5 by A.F.Scrub.
Posted Nov 6, 2020 15:24 by A.F.Scrub
59.33Mb (760 downloads)
FSX/P3D ATR42-300 Calm Air. Calm Air is a Canadian airline flying in northern Manitoba and the Kivalliq Regio, Nunavut with it's base at Winnipeg Airport. Calm Air currently operate 7 ATR 42.
Model and VC by Virtualcol. Ex payware.
Textured and assembled for P3Dv5 and should be ok in FSX and earlier P3D versions by Chris Evans.
Posted Nov 6, 2020 07:48 by chris evans
61.39Mb (1776 downloads)
FSX/P3D ATR72-600 Binter Canarias package. Binter Canarias is based at Gran Canaria Airport in the Canary Isalands.
Model and VC by Virtualcol. Ex payware.
Textured and assembled for P3Dv4.5 and should be ok in FSX and earlier P3D versions by Chris Evans.
Posted Nov 4, 2020 09:45 by chris evans
90.33Mb (1429 downloads)
FSX/P3D de Havilland Canada DHC-7 British Antarctic Survey pack.
The British Antarctic Survey is a UK Antarctica scientific research organisation and a member of the Natural Environment Research Council. They currently operate 5 aircraft in both polar regions. One of which is this Dash DHC-7.
Model by Milton Shupe, Mike Kelly, George Arana and Sim-Outhouse. FSX native conversion by Eagle Rotorcraft Simulations. Aircraft includes internal cabin. Textured and tested in P3Dv5 by Chris Evans. Should work in FSX and all previous P3D versions.
Posted Oct 30, 2020 07:49 by chris evans
16.85Mb (2016 downloads)
FSX/P3D (all versions to v5) Cessna 140 The Cessna 140 was a "starter" plane in more ways than one. They were affordable, and they were easy to fly and maintain. They were the plane in which many pilots trained and so were the perfect first-plane purchase for many people. They also helped push Cessna into its postwar "modern age" of building all-metal, highly reliable aircraft for training and personal use. Native FSX/P3Dv3,v4,v5 model by A.F.Scrub
Posted Oct 26, 2020 17:17 by A.F.Scrub
0.85Mb (137 downloads)
I created a Carbon Fiber livery for freeware Edgley Optica. The tail number is N126C ;). Install instructions included in the README. For best results, use this along with my carbon fiber interior mod and altimeter fix both available to download on Simviation. Visit my Facebook @trunorthsim to report any issues.
Required files:
required file
Posted Oct 21, 2020 07:41 by TruNorthSim
3.56Mb (246 downloads)
I modified the original interior texture files of the freeware Edgley Optica to look like carbon fiber. I also recolored the seats black and the carpet grey.
Move the texture and texture.shared folders into your Edgley Optica's aircraft folder. Overwrite the original files. I included backups just in case something goes wrong and to save time. Visit my Facebook @trunorthsim to report an issues.
Required files:
required file
Posted Oct 19, 2020 22:11 by TruNorthSim
0.00Mb (116 downloads)
A crash to desktop would occur when you would try to select or load the freeware Edgley Optica in P3Dv4 or P3Dv5. I changed a few entries in it's aircraft.cfg that was causing the crash. Move this aircraft.cfg to your Edgley Optica's aircraft folder and overwrite the old one. Don't forget to make a backup of the original just in case something goes wrong.
Required files:
required file
Posted Oct 19, 2020 19:16 by TruNorthSim
0.27Mb (235 downloads)
This texture file fixes Craig Richardson's freeware Edgley Optica's altimeter. The original altimeter's needle always pointed to 1000 ft above the correct altitude. That's because the VC texture did not match the gauge. I made a new one that is very close to correct. Move this texture file into your Edgley Optica's texture.shared folder and overwrite the old one. It wouldn't hurt to make a backup of the old one in case something goes wrong. Visit my facebook @trunorthsim to report any issues.
Required files:
required file
Posted Oct 19, 2020 07:03 by TruNorthSim