258.91Mb (248 downloads)
This is a comprehensive update from the original package for FSX/P3D. This being for P3Dv4+ only. The update includes the updating of aircraft's textures, addition of PBR, new updated model configurations/tanks, updated sounds, and a few additional liveries. This is the entire aircraft. Originally by the CalClassic Propliners team that gave me permission to create the original package, this is an improvement on that initial pack. The pack includes the DC-6/F aka: Baby DC-6 and the DC-6A and B models. Which encompass the shorter bodied airframe and longer bodied airframe with and without the aerodynamic propeller fairings on the prop hubs as well as other minor differences in configurations and tank designs. Despite the different airframes and performance differences the DC-6 platform carried up to 2,450 US Gallons or 22,050lbs of retardant/water aboard. The operators included in this package are variations from Aero Union, Conair, Securite Civile, UTA Industries, TBM Inc, Sis-Q Flying Service, and Macavia International. 5 model variations and 8 liveries total. Original aircraft by Tom Gibson, FSAVIATOR, Jens Kristensen, and Greg Pepper. Airtanker conversion and update modifications by Nicholas Mitchell.
Posted Apr 27, 2023 01:02 by Nicholas Mitchell
143.35Mb (410 downloads)
Hello and welcome to my Cal Fire S-2T Tanker pack. This has been a years work in progress with research and painting on and off with school and work. I have used Scorchs tanker pack since the day it was released, and the earlier paints even before that from Milton and his team.
The original S2T Model by Milton Shupe, flight model by Tom Falley, sounds by Nigel, and paint by Rachael Whiteford, Scorch00(Nicholas), and possibly Jeremy "Tankerguy72" U. Paint lines were traced over on a new canvas to create the textures. Logos updated to high quality now that they are readily available, pilots updated to semi-correct uniforms. Both clean and retardant stain belly textures for each livery. Pick and choose, mix and match!
You will need the original S-2T model by Milton and his team for these to work.
This will be 1 of 4 Cal Fire packs that I will be releasing this year.
Required files:
required file
Posted Feb 27, 2023 00:15 by Delta
148.33Mb (282 downloads)
The Grumman F7F Tigercat, also known as the "Firecat" in aerial firefighting service flew as the first fast twin engine IA or Initial Attack firebomber in the United States. The Tigercat airtankers came equipped with an 800 gallon or 1000 gallon retardant tanks. These versions are the 1000 gallon tank version. The original model was done by Milton Shupe and with his permission I have combined it with the updated versions done by Gordon "Gman" Madison, and my own updates with PBR and some associated file updates. I have also included an addition six liveries to make a total of eight from the original releases for FS2004. Operators included in the pack are TBM Inc, SV Flying Service, Sis-Q Flying Service, and Cal-Nat Airways. Each operator has two liveries. Aircraft is only compatible in P3Dv4 and V5. Please read the readme file as there are many many people that have helped make the Tigercats possible over the years, and their names are part of this continuation. Many thanks to Milton Shupe. Additional repaints and modifications by Nicholas Mitchell
Posted Feb 24, 2023 00:11 by Nicholas Mitchell
450.83Mb (355 downloads)
This package is an updated version of the v1.0 package. However this pack is for use entirely in P3Dv4 or newer sims. Originally based on FS KBT's L-188 Passenger and Cargo versions, I was given permission by KBT to create the airtanker versions. This expands upon that permission updating them for use exclusively in the newer sims. The two models have been vastly updated and improved. Largely are a completely updated interior and exterior PBR added to them. Some other quality of life updates, effects, and texture updates for all 13 liveries contained in this pack. 9 aircraft for Air Spray, 2 for Buffalo Airways, and 2 for Conair. The Lockheed Electra tankers serve mostly in the confines of Canada, but have seen service in South America and the United States. The Electras are extremely fast aircraft, capable of flying at speeds in excess of 400 mph and able to carry 3,000 gallons of retardant. They have proven workhorses of the Canadian Territories in many a fire season. Original Aircraft by FS KBT, modified by Nicholas Mitchell.
Posted Jan 19, 2023 04:01 by Nicholas Mitchell
17.01Mb (369 downloads)
This is the default Beech Baron converted to the Beech 58 TC flight dynamics and specs.
This turbocharged Baron is capable of 280 MPH in level flight. Unfortunately the model provided by Mark Rooks of his mod was in non-native FSX format. So I took the default FSX models but used the FDE provided by Mark Rooks which consisted out of an aircraft.cfg file plus an .air file. In that aircraft.cfg I did make changes to the [Lights] section, added extra Taxi and Landing lights. Then I replaced the annoying strobe light causing flashing in VC by a smaller strobe light. Also I added VC cameras in it. Then I added a FSX stock livery and a livery by Zane Gard, Jr. (N453TB)
In the Panel.cfg I changed the background texture of the Airspeed Indicator so that the speed needle point to higher values in the 'green arc'. ALso some small other changes, compared to the default panel.cfg
Sound is aliased to a Beech King Air, as Mark Rooks did. In this package the models are NOT provided so you must take them from your FSX or
Prepar3D install disks. If you have already installed a beech_baron_58 then you're okay.
For a different sound you can edit the sound.cfg file in the beech_baron_58TC sound folder. If you like the new light configuration you can of course, bring it over to the default baron 58. All tested okay in Prepar3D v4.
Posted Jan 10, 2023 21:00 by Flanker256
0.00Mb (550 downloads)
Small error fix for my modification of the Piper Warrior-II PA28-161 V2 by Rien Cornelissen.
In the XML audio panel file was an error concerning the DME audio help. This has been corrected now. Sorry for the inconvenience.
Required files:
required file
Posted Dec 23, 2022 07:23 by Flanker256
3.99Mb (167 downloads)
Repaint for Milton Shupes S2 Turbo. This is a repaint of Tanker 180, one of the first turbo trackers that Cal Fire employed. It was a joint effort between Cal Fire and Marsh Aviation. Works in both FSX and P3D. Requires the base package S2T linked below.
Required files:
required file
Posted Dec 18, 2022 05:07 by Delta
22.88Mb (795 downloads)
These modifications are for the Piper Warrior-II aircraft created by Rien Cornelissen.
They consist of modified gauges, added Cockpit sounds, added VC cameras, added documentation
and kneeboard files, slightly changed light configuration, enhanced Bendix King Auto Pilot,
and some new and some missing gauges as well. All has been tested okay in Prepar3D v4+.
FSX users however can also use these modifications.
Finally two newly created liveries are added.
Note that this is not the complete aircraft.
You still need to download the original Piper Warrior-II PA28-161 V2 by Rien.
Required files:
required file
Posted Dec 16, 2022 11:47 by Flanker256
90.22Mb (204 downloads)
Originally FSX, now available as P3DV4 native taking advantage of specific features such as bump mapping, PBR and self shadowing. By Eagle Rotorcraft Simulations
Posted Dec 16, 2022 00:36 by George Arana
37.92Mb (286 downloads)
Originally FSX, now available as P3DV4 native taking advantage of specific features such as bump mapping, PBR and self shadowing. By Eagle Rotorcraft Simulations
Posted Dec 16, 2022 00:35 by George Arana