Mar 25, 2019 |
Prepar3d > Vintage > Page 13
 
 
FSX/P3D Northrop RF-61C Reporter Package
FSX/P3D Northrop RF-61C Reporter Package
66.35Mb (2301 downloads)
The Northrop RF-61C Reporter was the little known recon' sister of the famous P-61C Black Widow. One of the fastest airplanes of her era, the Reporter only served for a few years before being retired as the jet age was introduced. This is a comprehensive and detailed model with fully functioning Virtual Cockpit, dedicated flight dynamics, full animation and an instruction manual. Model by Dean Crawford, DC Designs. FDE by Pam Brooker. Fuel truck and engine effects by Mark Schimmer.
Posted May 9, 2018 05:29 by Dean Crawford
 
Ground steering fix for the Focke Wulf FW 58
0.19Mb (354 downloads)
This is a fix for the ground steering of the aircraft.
Required files:
required file
Posted Apr 30, 2018 02:11 by Michael Pook
 
FSX/P3D (V.3) Focke Wulf FW-58 updated
FSX/P3D (V.3) Focke Wulf FW-58 updated
22.92Mb (822 downloads)
The Fw 58 was a low-wing monoplane with two piston engines mounted in nacelles on the wing leading edges. The crew sat under an enclosed canopy. Aft of the flight deck, the fuselage was open to form a moveable machine gun station. The tailwheel undercarriage was retractable. The Fw 58 was widely used for training Luftwaffe personnel. It was also used as a VIP transport, ambulance, feeder airliner, photo reconnaissance, and weather research aircraft. It was built under license in Bulgaria, Hungary and Brazil. It was also operated by several countries such as the Netherlands, Romania, Croatia and Turkey. This is an FSX panel update for the Focke Wulf FW 58, previously designed for FSX by A.F. Scrub. The package includes a wheeled and a float version of the aircraft. Both the new entirely remodeled and enhanced VC and the 2D panel are now equipped with all authentic German gauges. smoke and VC light added. The wheeled variant's engines are now automatically fired off on the runway. All credits go to A.F.Scrub for the original model, new VC, gauge configuration as well as smoke and vc light by Michael Pook. This is the whole aircraft.
Posted Apr 28, 2018 09:44 by Michael Pook
 
FSX/P3D>v4 Curtiss A-25A, SB2C Helldiver Package Revised
FSX/P3D>v4 Curtiss A-25A, SB2C Helldiver Package Revised
37.57Mb (1461 downloads)
FSX/P3D>v4 Curtiss A-25A, SB2C-1, SB2C-4, -4E, -5 Helldiver Revised and updated. previous version did not have a functional VC so I added the best - Milton Shupe Vultee VC. Added sounds. Also fixed crash on takeoff. FSX native, MDL X materials and animations, several new models, radar options, bomb, rocket, torpedo and glide bomb features. See readme for details, operational features and credits. Sound current aliased to Howard 500X-an excellent sound pack. Original package by Wolfgang "Wolfi" Faber. Thanks to LLS for the FSX native conversion. Andre Luddick for some texture updates. Other updates by Chris Evans. Tested in P3D4 but should be fine in FSX and earlier P3D versions. IMPORTANT!! ---->>> Use only gentle (c. 50% approx) throttle during takeoff (over 80K (MPH) and increase gradually after takeoff. Otherwise you will crash this powerful aircraft.
Posted Apr 20, 2018 09:07 by chris evans
 
Panel update for the new Supermarine Spitfire by A. F. Scrub
Panel update for the new Supermarine Spitfire by A. F. Scrub
6.23Mb (729 downloads)
This is a panel update for the Supermarine Spitfire Mk VbTrop, recently uploaded by A, F. Scrub. Thanks to him for that terrific model but the panels needed some updating. New gauges and gauge configuration for both the VC and the 2D panel give them a more detailed appearance and the VC has been entirely newly designed. New VC and gauge configuration by Michael Pook.
Required files:
required file
Posted Apr 16, 2018 11:17 by Michael Pook
 
FSX/P3Dv3/v4 Spitfire Mk VbTrop
FSX/P3Dv3/v4 Spitfire Mk VbTrop
17.16Mb (1034 downloads)
FSX/P3Dv3/v4 Spitfire Mk VbTrop The basic Mk V was a Mk I with the Merlin 45 series engine. This engine delivered 1,440 hp (1,074 kW) at take-off, and incorporated a new single-speed single-stage supercharger design. Several Mk I and Mk II airframes were converted to Mk V standard by Supermarine and started equipping fighter units from early 1941. The VB was the first production version of the Spitfire to use "clipped" wingtips as an option, reducing the wingspan to 32 ft 2 in (9.8 m).The clipped wings increased the roll rate and airspeed at lower altitudes. Native FSX/P3D GMAX model by A.F.Scrub
Posted Apr 15, 2018 04:45 by A.F.Scrub
 
FSX/P3D v3/v4 Hurricane two seater
FSX/P3D v3/v4 Hurricane two seater
18.07Mb (643 downloads)
FSX/P3D v3/v4 Hurricane twoseater The Hurricane was a big leap forward in performance compared to biplanes such as the I-152 in service when the Germans attacked. The Hurricane also handled differently to equivalent Soviet designs and as a result the Soviets asked for a two-seater trainer version very early on.Ten Hurricane Mk.IIs were selected for conversion which involved removing the armour behind the original pilot seat and effectively fitting a duplicate cockpit complete with second windscreen. Having gained experience building the two seat trainers the Soviets went about converting the aircraft with a second position behind the pilot for an observer who faced rearward and was thus not as obstructed by the aircraft’s wing when looking down as the pilot was. These aircraft never had full canopies fitted to them which as well as making them extremely cold in the harsh Soviet weather also caused buffeting problems at high speeds. FSX/P3D native GMAX mdl by A.F.Scrub.
Posted Apr 3, 2018 08:34 by A.F.Scrub
 
FSX/P3D Curtiss SB2C-5 Helldiver's textures
FSX/P3D Curtiss SB2C-5 Helldiver's textures
0.61Mb (347 downloads)
AIRFIX's texture for Wolfgang "Wolfi" Faber's Curtiss SB2C-4/5 Helldiver. Requires FSX updated model - link below
Required files:
required file
Posted Mar 30, 2018 06:11 by Enrique Medal
 
FSX/P3Dv3 v4 Hawker Hurricane
FSX/P3Dv3 v4 Hawker Hurricane
20.86Mb (990 downloads)
FSX/P3D Hawker Hurricane The Sea Hurricane Mk IA were Hurricane Mk I modified by General Aircraft Limited. They were modified to be carried by CAM ships (catapult armed merchantman) and called Hurricats, they could not be landed on the ship after their mission. The Hurricane Mark IIC modified with catapult spools and arrester hook were known as the Hooked Hurricane and were real carrier born fighters. FSX/P3D native GMAX model by A.F.Scrub.
Posted Mar 26, 2018 03:27 by A.F.Scrub
 
FSX/P3D (V.3) Dornier Wal (whale) with updated panels
FSX/P3D (V.3) Dornier Wal (whale) with updated panels
32.83Mb (921 downloads)
The Dornier Do J Wal ("whale") was a twin-engine German flying boat of the 1920s designed by Dornier Flugzeugwerke In the military version (Militärwal in German), a crew of two to four rode in an open cockpit near the nose of the hull. Several countries, notably Italy, Norway, Portugal, Uruguay and Germany, employed the Wal for military tasks. The civil version had a cabin in the nose, offering space for up to 12 passengers, while the open cockpit was moved further aft. Main users of this version were Germany, Italy, Brazil and Colombia. The Norwegian polar explorer Roald Amundsen used two Dornier seaplanes in his unsuccessful attempt to reach the North Pole in 1925. His two aircraft, N-24 and N-25, landed at 87° 44' north. It was the northernmost latitude reached by any aircraft up to that time. This is an FSX update for the FS2002 model of the Wal, posted by the "Freeware Project Dornier Whale" in 2003. It features three closed cabin models and one open cabin model in four different liveries. The focus of this update lies on completely reworked VCs and new 2D panels, giving the cockpits a much more realistic appearence. Included are three different panels (two for the closed cabin model and one for the open cabin) with now all German authentic gauges of the 1920s. Thanks to Michael Garbers, Wolfram Beckert, Uwe Hochmuth and Markus Senkbeil for the original models, reworked VCs and new 2D panels by Michael Pook.
Posted Mar 22, 2018 08:29 by Michael Pook